IP68 LED strips for bathroom
This selection is also available in our French store: Rubans LED IP68 pour salle de bain
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
First choose the length to cover, then the voltage, then the light colour. A 24V IP68 strip in 3000K white suits the perimeter of a mirror, a 12V one is enough for a short shower wall, and a 220V one simplifies long ceiling or niche runs. IP68, however, is not negotiable: it is either there or it is not.
Which IP68 LED strip should you choose for a bathroom?
Three factors decide the model: voltage, light colour and length. IP68 is not up for debate, it is verified on the manufacturer's data sheet, because it determines how the strip holds up in a room where water runs and the air stays saturated. A well-chosen IP68 waterproof LED strip is installed once and then controlled without a second thought.
For power, length dictates everything. Over a short distance (mirror, wall return), a low-voltage strip fits easily behind a cabinet. Over a full perimeter, you have to account for voltage drop along the strip, so a better-sized model is needed. The waterproof selection gathers the sheathed strips that withstand bathroom condensation.
12V or 24V LED strip: what is the difference near a water point?
Both run on low voltage and require a transformer housed in a dry, accessible place. 12V suits short runs, where voltage drop remains negligible. 24V handles distance better and keeps an even light over several metres. See the 24V LED strips if your layout goes beyond a simple mirror surround.
220V LED strip: when should you choose it?
Without a transformer, 220V connects directly to the mains and frees up space behind a vanity unit or in a narrow niche. It becomes the obvious choice when no driver box can be housed neatly. The connection itself remains an electrician's job, all the more so near a water point. The 220V LED strips meet this case.
Where should you install an LED strip in the bathroom?
Four locations really deliver: the shower wall for grazing light, the mirror surround to light the face, under the vanity unit as a night light, and niches as a line of light. Each has its own fixing or transformer access constraint. Proximity to a water point falls under current electrical rules and the involvement of an electrician.
| Location | Desired effect | Suitable strip type | Point to watch |
|---|---|---|---|
| Shower wall | Indirect grazing light | IP68 strip in 12V or 24V | Mechanical fixing, connection outside the water zone |
| Mirror surround | Shadow-free face lighting | 3000K white with diffuser | Glare if the strip stays visible |
| Under vanity unit | Night light, floating effect | Waterproof strip, gentle output | Transformer access for maintenance |
| Niche or shelf | Discreet line of light | Aluminium profile and IP68 strip | Heat dissipation in the profile |
| Ceiling and room perimeter | Indirect general light | 24V or 220V depending on length | Voltage drop over long runs |
In the shower, along the wall
A strip set at a grazing angle on the wall, facing up or down, highlights the tiles without lighting what is opposite. Adhesive alone is not enough: a mechanical bracket or a profile prevents it peeling off at the first hot spray. Also consider the curtain or glass panel that may block the light.
Around the mirror and under the vanity unit
A mirror surround needs even light and a diffuser, otherwise the bright dots show on the glass. Under the cabinet, low output and an accessible transformer are what matter. The same principle applies elsewhere in the home, for modern kitchen decor under wall units as for kitchen decoration on a worktop: the range of LED strips covers these uses, and the lighting catalogue completes the room's lighting.
What exactly does IP68 mean on an LED strip?
IP is a two-digit protection rating. The first digit concerns solid bodies and dust; the second concerns water. The 8 is the highest level of sealing, validated by the manufacturer under its own test conditions. This protection covers the strip itself, not the transformer, the connectors or the connection points.
IP68, IP65, IP44: what changes against splashes
IP44 protects against limited water splashes, IP65 withstands jets without allowing immersion. IP68 adds resistance to immersion according to the manufacturer's protocol. In a shower, the gap between IP44 and IP68 comes down to steam and repeated run-off. For genuinely immersed use, compare with the LED strips for pools.
What IP68 does not protect
A transformer box left within reach of a jet, a poorly insulated connector block or a badly crimped connector remain weak points, whatever the strip. IP68 does not authorise permanent immersion in domestic use either. Over a long run, prefer 24V LED strips for long runs to limit the number of joints, and therefore the areas to protect.
How do you install an LED strip in your bathroom shower?
On a tiled wall, degrease, dry completely, then supplement the adhesive with a mechanical fixing or a profile. The transformer is housed away from splashes, every connection is protected, and the strip is tested before being stuck down for good. Connecting to the mains is entrusted to an electrician, all the more so near a water point.
On a tiled wall: an installation that lasts
Glossy tiles or a greasy joint line make the original adhesive peel off within weeks. Clean, let dry, then press the strip along its entire length. In a shower, the silicone or polyurethane-sheathed waterproof selection withstands repeated washing better than a bare strip.
Connection and transformer: the precautions
The power supply box goes in a dry zone, accessible for maintenance, and never on the floor under the shower. Joints between two lengths are made in a sheltered spot, with a suitable connector. Finally, measure before cutting: the strip can only be cut at the marks set by the manufacturer.
Which light should you choose for the bathroom: warm white, neutral white or RGB?
Around the mirror, a white of around 3000K lights the face without yellowing it or hardening the features. 2700K sets an end-of-day mood, 4000K gives a crisp rendering in a room without a window. RGB brings a mood colour to the shower or a niche, and RGBW adds an adjustable white.
| Mood | Light type | Effect in the room | Typical use |
|---|---|---|---|
| Warm | 2700K | Golden white, end-of-day light | Bath corner, night light |
| Natural | 3000K | Soft white, skin tones respected | Mirror, vanity unit |
| Neutral | 4000K | Clean white, crisp rendering | Room without daylight |
| Adjustable | RGB or RGBW | Mood colour or adjustable white | Shower, niche, ambience |
Warm white 2700K or 3000K around the mirror
3000K remains the best compromise in front of a bathroom mirror: the skin stays natural and the white of the tiles does not turn blue. The 3000K LED strips can also be used as a boost in the evening, at a lower output. 2700K will suit a night light or a relaxed bath corner better.
RGB and RGBW for adjustable light
RGB gives a fixed or animated colour, handy for highlighting a niche or a wall. But without a dedicated white, lighting the face becomes approximate. RGBW corrects this by adding a white component: RGBW LED strips cover both uses, whereas RGB LED strips are enough for purely decorative ambience.
How do you maintain a waterproof LED strip and make it last?
A dry dusting, then a slightly damp cloth, with no abrasive product or solvent that would attack the silicone. Check the joints and connectors from time to time, make sure no water pools on them, and keep the transformer ventilated. These three steps are enough to keep the strip clean and stable over time.
Avoid pulling on the strip to clean it: the weak point of a strip remains the link between two sections. If you notice a black spot or localised flickering, inspect the joint before replacing the whole thing. To replace a tired strip or equip another room, browse all LED strips and compare the sheaths before reordering the same reference.
Which mistakes should you avoid with an LED strip in a damp bathroom?
The most common: sticking it to a greasy surface, enclosing the strip in a profile without thinking about condensation, leaving the transformer exposed to splashes, cutting outside the marked points. A non-waterproof strip, even a good-quality one, has no place in a shower. Each of these mistakes costs you peeling, a failure or rework.
Ignoring condensation behind a profile
A closed profile without venting traps moisture against the strip, and water ends up settling there. Prefer a profile with a diffuser and unsealed ends on the dry-room side, or a sheathed strip left bare. The strip's sealing does not replace ventilation of the assembly.
Exposing the transformer to splashes
A box placed on the floor in the shower zone works at first, then oxidises. House it behind the vanity unit, in an enclosure or above the skirting board, in a dry zone. For a complete project, match the strip with the rest of the Designix lighting catalogue to balance the light sources.
How many metres of LED strip should you allow for and how do you measure?
Measure the usable length: mirror perimeter, niche outline, wall length, adding a margin for corners and offcuts. This length determines the power supply, not the other way round. Count the metres, not the number of references: two short strips are rarely replaced by a single long run.
A right angle uses a few extra centimetres compared with a straight run, and every cut must fall on a manufacturer's mark. Also note the location of the future transformer before ordering. The longer your layout, the more a model in 220V strips or 24V will stay consistent in brightness from one end to the other.
Next step: take your measurements, choose the voltage, then compare the models in the waterproof selection and find the whole range via back to the lighting universe.
- Secure payment
- Tracked delivery
- Returns available
- Designix customer service
Frequently asked questions about IP68 LED strip in the bathroom
What does the 68 rating change on a bathroom LED strip?
The 68 rating means the strip is protected against dust and against immersion under test conditions defined by the manufacturer. In a bathroom, this covers splashes and the ambient humidity of the shower. The connectors and the transformer still need protecting separately.
Can you install an LED strip in the shower?
Yes, provided you choose a waterproof IP68 strip, fix it mechanically to a clean surface and keep the transformer and connections away from splashes. Connecting to the mains near a water point is done with an electrician, in line with current rules.
Is a 12V LED strip enough in a damp bathroom?
12V suits a mirror or a shower wall, because the voltage is low and the length stays short. It requires housing a transformer in a dry, accessible place. For a long run, 24V or 220V is simpler.
Waterproof LED strip: 220V or 12V, which is easier to install?
220V avoids the transformer and suits long runs, which simplifies installation when there is no room for a box. 12V or 24V requires a transformer but can be housed more discreetly behind a cabinet. The choice depends on the total length.
Can an IP68 LED strip stay underwater permanently?
IP68 certifies protection against immersion under the conditions tested by the manufacturer, not use in an aquarium or a guaranteed permanent immersion. For a bathroom, what counts is resistance to splashes and humidity. The product data sheet states the use actually intended.





