Industrial style lampshades
This selection is also available in our French store: Abat jours style industriel
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?
An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
An industrial style lampshade dresses an E27 socket with a metal cage, enamelled steel or clear glass, and sends light downwards. The choice comes down to three measurements: the diameter of the fitting, the clearance around it and the bulb cap.
- What is an industrial style lampshade
- Pendant, table lamp or floor lamp
- Industrial chandelier or pendant
- Diameter, cap and fixing
- Making a pendant light
- Which room to install it in
- Bulb and care
What is an industrial style lampshade?
Look for three signs: an exposed metal frame, visible screws or rivets, and a beam of light pointing down. The industrial style lampshade borrows workshop equipment and turns it into a decorative object, most often on an E27 socket. It fits a pendant, a table lamp or a floor lamp, depending on the shape chosen.
Factory style lampshade: what really defines the workshop look
The metal cage, enamelled steel, perforated metal and clear glass set the factory look; exposed screws and geometric lines do the rest. A black or anthracite finish leans towards loft, a white enamel towards the joiner's workshop. For a smoother result, compare with lampshades in a more modern style.
What this lampshade changes in a room
An open cage casts shadows on the wall and the worktop: the light is directed, never diffuse. The metal silhouette shows as much switched off as on, which matters in a hallway or corridor. If you want the opposite, start from a softer diffusion in fabric.
Which industrial style lampshade for a pendant, a table lamp or a floor lamp?
A pendant calls for a lampshade open at the top and bottom to let the light flow; a table lamp, a small diameter so the socket stays close to the edge; a floor lamp, a tall closed shape. In all three cases, the diameter must stay consistent with the fitting that carries it.
Industrial style pendant lampshade: the shape that directs light
A dome or a cylinder open on both sides lights the table and sends part of the beam to the ceiling. Allow a diameter clearly smaller than the width of the tabletop, around 30 to 40 cm above a table 80 cm wide, so as not to get in the way.
Industrial style lamp lampshade: small diameter, socket close by
On a table or bedside lamp, an oversized lampshade visually tips the whole thing over. Aim for a diameter close to that of the base and a cap accessible under the frame. Linen models fill this role well when you want to soften the metal.
| Fitting | Shape and proportion | What to check |
|---|---|---|
| Pendant above a table | Cage or dome open at top and bottom | Drop height and diameter relative to the tabletop |
| Table or bedside lamp | Small diameter, closed shape | E14 or E27 cap and height of the base |
| Floor lamp | Tall cylinder, metal or matte fabric | Socket diameter and supported weight |
| Wall light | Half cage or directional steel | Wall fixing and protection rating in damp rooms |
Industrial chandelier or pendant: which to choose?
An industrial chandelier multiplies the light points on a metal frame, whereas a pendant carries only one. In a kitchen, a chandelier above an island lights the work surface; in a large volume, a multi-arm model fills the height. Check the weight and drop height before drilling.
Industrial kitchen chandelier: above an island or a table
Several spread sources light a wide surface without leaving shadow zones between the plates. Keep the whole aligned with the edge of the island and a drop that lets the eye pass underneath. In a living room, a living room lampshade often completes the pendant.
Large black industrial chandelier: check height and weight before drilling
A large industrial chandelier is meant for high ceilings: under a standard height, it gets in the way of movement. Weigh the frame before choosing the anchor point and check the available cable length. The dark finish pairs with black finishes on the other lights in the room.
How to choose the diameter, cap and fixing of an industrial lampshade?
Measure the diameter of the fitting and the clearance before choosing: an oversized lampshade on a small table lamp unbalances the whole. The E27 cap fits most sockets, the E14 small formats. Also check the supported weight and the presence of a suitable fixing ring.
E27 and E14 caps: how not to get it wrong
Unscrew the bulb and read the marking on the socket, or measure the thread: 27 mm for E27, 14 mm for E14. Most pieces in the lampshade collection fit an E27 socket with a ring.
Fixing and weight: what to check before installing
A steel lampshade weighs more than a thin cage: the ring, the clamping screw and the fitting must hold that weight. On an adjustable pendant, check the remaining cable length. In a damp room, the protection rating matters as much as the fixing. For the whole assembly, our range of home lighting gives the same reference points.
How to make an industrial pendant light?
To make an industrial pendant light, you need an E27 socket, a flexible cable, a ceiling rose and a cage or steel lampshade. The tricky part remains the mains connection, to be entrusted to an electrician, and the ceiling fixing, which must hold the weight of the whole.
The minimum equipment to make an industrial pendant light
Collar socket, textile or flexible cable, ceiling rose, connector blocks, and the chosen lampshade. Size the cable for the drop length and the intended bulb. If the urge to DIY passes, the Designix lighting catalogue offers pre-assembled sets.
Mistakes to avoid with a homemade lampshade
A cable that is too short rules out adjustment, a lampshade that is too heavy strains the socket, a cage closed at the top over a strong bulb overheats. Never improvise the mains connection: have the line installed by an electrician and keep a bulb suited to the opening of the lampshade.
Which room to install an industrial lampshade in?
In a kitchen and above a table, the industrial lampshade directs light onto the worktop. In a living room or bedroom, an open cage or a matte fabric softens the result. In a hallway or workshop, the metal carries the factory look without glare.
Kitchen and dining room: light above the work surface
Above an island, the metal pendant lights the prep area and the hob without dazzling people sitting down. A low opening concentrates the beam on the surface. For the table, a wider and lower model gives dining light, to compare with white colours if the dark metal feels too heavy.
Living room and bedroom: when industrial turns softer
An open cage on a floor lamp, a matte fabric on a table lamp: the register stays workshop, the light drops a notch. In a bedroom, a small format on the bedside table is enough, as the models seen in the bedroom range show. For an infant, the baby's room calls for even more subdued light.
Which bulb and which care for an industrial lampshade?
Choose an LED bulb with an E27 cap, in warm light for a workshop feel, and adapt the power to the opening of the lampshade: an open cage lets everything through, a matte fabric filters it. Metal is dusted dry, glass with soapy water, fabric with a soft cloth.
Which bulb to choose for an industrial lampshade?
A colour temperature around 2700 to 3000 K restores the workshop yellow; above 4000 K, the result turns white and cold. An open cage calls for a low-power bulb, a matte fabric filters a stronger one without glare.
Cleaning a metal, glass or fabric lampshade
Painted metal is dusted with a dry cloth, without abrasive that would mark the finish. Glass and enamel are washed with soapy water then dried straight away to avoid marks. Matte fabric is cleaned with a soft vacuum or a brush, without wetting.
| Material | Diffused light | Where it works | Care |
|---|---|---|---|
| Open metal cage | Directed, with cast shadows | Kitchen, hallway, workshop | Dry cloth, regular dusting |
| Solid or enamelled steel | Concentrated downwards, without glare | Dining table, desk | Damp cloth, no abrasive |
| Glass or enamel | Clear and even | Living room, main room | Soapy water, dry immediately |
| Matte fabric | Diffuse, softer | Bedroom, living room | Soft vacuum or brush |
Frequently asked questions
How to choose an industrial style lampshade?
Start from the fitting: measure the diameter of the socket or ring, the clearance around it, then choose the material according to the light you want. A metal cage directs the beam, a matte fabric softens it. Finally check the cap, usually E27, before ordering.
Which industrial style pendant lampshade to choose?
Favour a shape open at the top and bottom: the light comes out both sides and lights the ceiling as much as the table. The diameter must stay smaller than the width of the tabletop so as not to get in the way, and the weight compatible with the ceiling fixing.
How to make an industrial pendant light?
You need an E27 socket, a flexible cable, a ceiling rose and a cage or steel lampshade. The mains connection and the ceiling fixing require checking the cable cross-section and the strength of the support: entrust this step to an electrician rather than improvising alone.
Which industrial chandelier for a kitchen?
Above an island or a table, a chandelier with several light points lights the whole work surface. Check the drop height so as not to get in the way of movement, the weight of the frame and the available cable length before drilling the ceiling.
How to care for an industrial lampshade?
Metal is dusted with a dry cloth, without abrasive product that would mark the paint. Glass and enamel are cleaned with soapy water then dried straight away. Matte fabric needs a soft vacuum or a brush, and washing only if the model's label allows it.
To equip a whole room, start from all our lights and work down to the room in question: each lampshade to fit on its socket is chosen after measuring the fitting, not before. Secure payment, tracked delivery, returns and Designix customer service accompany every order.
