Wall hanging

Count a wall mount, a cable or an arm, a shade and a bulb: that is all a hanging wall light requires, a fixture that brings light down from the wall instead of pressing it flat against the partition. It replaces a bedside table, lights a worktop or a reading corner when the ceiling is not suited to it.

What exactly is a hanging wall light?

A hanging wall light is a fixture fixed to the wall whose light source hangs down, carried by a cable, an arm or a support, instead of being pressed flat against the partition. It lights downwards, for ambience or as a supplement, and consists of a wall mount, a shade or diffuser, and a bulb.

Hanging wall light: how is it put together?

Four elements go together: the plate or canopy that screws to the wall, the cable or arm that carries the drop, the shade or diffuser that directs the light, then the socket and the bulb. It is this free fall that sets the model apart from a wall light, and it is what makes the source visible from the room. You will find these compositions in our full range of wall and hanging lights.

Decorative hanging wall light or plant holder: how to tell?

The same expression is sometimes used to mean a plant holder, a bike rack or a wall hook. In this collection, it means only a light fixture: an electrical source, with socket, wiring and shade. The marker is simple, the presence of a socket and a power cable. Comparable models are grouped in our hanging lights.

Where to install a hanging wall light in the home?

It goes where there is no floor space or ceiling fixing point: on either side of a bed as a bedside light, above a worktop or a table, along a hallway, in a stairwell or near a bathroom mirror. The choice follows the function of the room more than fashion.

Hanging wall light for the bedroom: which side of the bed?

On each side of the bed, in place of bedside tables, in symmetry. The same height is planned on both sides so the light falls at the same level, and the model is kept within reach to switch it on from the bed. Our range for lighting a bedroom gathers the formats suited to this installation.

Hanging wall light for the kitchen: above the worktop

Above the worktop or the island, it frees the surface and avoids drilling the ceiling. The light must fall cleanly on the prep area without dazzling the person standing in front. A washable material and a source that is easy to replace matter more than the shape. See the models designed to go above the worktop.

In a hallway, a stairwell or a toilet, you look for guidance rather than general lighting: a low point that grazes the wall is enough to mark the passage. For a small space or a bathroom, check the protection rating stated on the product sheet. Our hallways and entrances gather the compact formats.

Hanging wall light or wall light: which to choose?

The wall light lights at surface level, flat against the wall, while the hanging wall light brings light down from a low point and becomes a decorative element in its own right. Choose the wall light for a hallway or a mirror, the hanging light for a bedside, a worktop or a reading corner.

Living room wall light: when to prefer it over a hanging light?

When the room is already furnished and only a supplementary light is missing, the wall light goes unnoticed without taking up space. It suits behind a sofa or under a shelf, where a free drop would get in the way. Our hanging light range remains the right path as soon as you want a visible focal point.

Stairwell wall light: marking a circulation area

On a staircase, the wall light marks the steps by lighting the wall rather than the void, and stays out of the line of sight. A hanging wall light is only of interest under a high stairwell opening, where its drop fills the volume. For a stronger effect, look at the pieces with a bold design.

How to get a powerful light in a modern living room?

A powerful light in a modern living room comes first from the number of points and the quality of the source, not from a single oversized fixture. Look at the power and luminous flux stated on the sheet, prefer an LED source and spread the lighting between ceiling, walls and supplement.

Powerful LED wall light: what to check on the sheet

Three lines are enough: power in watts, luminous flux in lumens and colour temperature in kelvins. Around 2700 to 3000 K, the light leans warm and suits rest; above 4000 K, it becomes white and more stimulating. An LED source holds its performance over time. Models with an integrated source are in our LED selection.

Modern living room wall light: shapes and finishes that work

Simple lines, slim volumes, matte black metal, white or gold: what works in a contemporary living room is restraint. A readable geometric shape is better than a busy decoration, especially if the wall stays bare. To go further, browse the contemporary models designed for this type of interior.

Which materials and finishes for a hanging wall light?

The material changes everything: wood warms the light and softens shadows, metal makes it clean and directed, glass diffuses it without marked shadow, macrame filters it while drawing on the wall. The finish, black, white or gold, sets the contrast with the partition.

Wooden hanging wall light: warmth and soft light

Wood filters and warms the light, which gives soft shadows and a calm atmosphere. It needs a dry cloth and does not cope well with stagnant humidity, so avoid it just above a sink. Metal, by contrast, directs the light and wipes clean in one stroke: see the metal versions for a kitchen or an office.

Macrame hanging wall light: the textile effect on the wall

Macrame and textile shades filter the source and project a pattern onto the partition. They are dusted often, never wetted, and pair well with a gold or patinated finish. If you are looking for warm reflections around the source, the models with a gold finish play that role. As for glass, the light travels without leaving a hard shadow, a safe choice for a small space.

See the glass selection to compare shapes and diffusions.

How to match a hanging wall light to your decor?

You match a hanging wall light to your decor by repeating a single family of materials and a single dominant finish per room. Boho chic calls for macrame, wood and warm tones; Italian design, fine lines and glass; an original room, a shape that stands out without saturating the wall.

Boho chic wall light: which codes to follow?

Natural materials, rounded shapes, warm tones and soft shades: boho chic accepts controlled disorder but not accumulation. One strong piece per wall is enough, the rest of the wall stays calm. The ball shapes fit well with this spirit, especially in small diameter.

Italian design kitchen hanging light: what characterises it

Fine lines, right proportions, worked glass and metal, discreet source: Italian design is recognised by its sobriety. In a kitchen, it expresses itself above an island or a worktop, in one or two aligned pieces. To stay in this spirit, compare the contemporary models with similar lines.

At what height and how to install a hanging wall light?

The height is determined by use: above the worktop in a kitchen, at shoulder height in a hallway, on either side of the bed in a bedroom, at a distance from the floor in a stairwell. Mark the point in pencil, check the anchoring, then set the drop once the room is furnished.

Fixing height: the markers per room

As a general marker, a hanging light above a table is placed about 60 to 70 cm from the surface, and a little higher above a worktop to clear the view. In a bedroom, the source drops around mattress height. In a passage, it must stay above the shoulder line. These values adjust to people's height and the function of the point.

XXL hanging light and high ceiling: which mounting?

Under a high ceiling, the wall mount goes higher and it is the cable length that makes the difference: the drop is set after furnishing, never before. Check the nature of the support before drilling and choose a plug suited to the wall. For large volumes, look at the design hanging lights with long drops.

How to care for a hanging wall light and avoid mistakes?

A soft, dry cloth is usually enough: dust the shade and cable regularly, avoid abrasive products on metal and stagnant water on wood or textile. Before drilling, locate the electrical cables and choose a plug suited to the wall.

Cleaning by material

Metal: soft cloth, no abrasive, so as not to scratch the finish. Glass: window cleaner then dry without streaks. Wood and textile: regular dusting, never wetted. A dusty shade loses light, it is the first care to do. The matte black finish just needs a little attention to finger marks.

Mistakes to avoid before drilling

Drilling without locating the conduits in the wall, choosing a plug too weak for the weight of the shade, hanging too low in a passage, multiplying different finishes in the same room. Each mistake is hard to fix afterwards, so measure twice before drilling once.

Tracked delivery, secure payment, possible returns and Designix customer service to guide you in your choice. If you are looking for an affordable model to equip a room without a high budget, browse the affordable models in the collection and check the stated dimensions before ordering.

Frequently asked questions