Halogen spotlight

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Also find us on Leroy Merlin Cdiscount Amazon
Les spots halogènes éclairent d'un faisceau direct et chaud, au plafond, dans un meuble ou en extérieur. Cette sélection réunit des modèles à encastrer, orientables ou sur rail, en culot GU10 ou en 12 V, à choisir selon la pièce et l'indice de protection.
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

No products in this selection.

Frequently asked questions

How do I choose the right light output?
Allow about 100 to 300 lumens per m²: about 150 lm/m² for a living room, about 350 for a kitchen. Each product page lists the lumens.
At what height should the light be installed?
Above a table: 70-85 cm from the tabletop; in a walkway: at least 2.10 m of clearance below the bulb.
What type of bulb?
Usually E27 or E14, sometimes GU10. Specified on each product page.
Compatible with LEDs and dimmers?
Yes, in most cases; for use with a dimmer, look for the “dimmable” mention.
Halogen spotlight
Designix · Decor & lighting

Light changes everything

From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

An halogen spotlight is chosen first by its base, GU10 on mains power or GU5.3 and G4 at 12 V, then by its placement: recessed in the ceiling for discreet light, adjustable to aim at a wall or a worktop, on a track when the points need to be movable. It then remains to check the ingress protection rating if the room is damp or if the fixture stays outdoors.

Which halogen spotlight should you choose for a living room?

In a living room, the halogen spotlight is chosen according to the desired effect and the mounting surface: recessed in the ceiling for discreet light, adjustable to illuminate a wall or a painting, on a track when the light points need to be moved. Base, voltage and number of points are decided after drawing the room.

Ceiling halogen spotlight: for which use

A recessed spotlight creates an even wash of light and leaves the surface free: this is general lighting. The same version in surface-mounted form is used when the void above the ceiling is too shallow for recessing. Compare the spotlights for the living room according to what the room allows.

Modern living room ceiling spotlight: what effect to aim for

An adjustable point sends light where you decide, onto a bookcase, a wall or a painting, and the direct beam gives relief to a flat room. This is the role of adjustable spotlights, whose finish is as noticeable as the light itself.

Halogen floor lamp: when to prefer it over spotlights

A halogen floor lamp lights a reading corner without touching the ceiling, and follows the armchair when you rearrange. It serves as supplementary lighting, different from fixed points. For distributed general lighting, start instead with the spotlight range.

How should spotlights be laid out on a living room ceiling?

First draw the plan of the room, then distribute the spotlights in regular rows aligned with the furniture rather than with the walls. Keep the points away from the walls and avoid drilling in line with a beam, a box section or a future piece of furniture.

Spotlight layout plan: how to prepare the drawing

Mark out the furniture, the door, any beam on the floor. Transfer each point in pencil onto this plan before climbing the stepladder. This work avoids drilling in line with a box section, and a recessed spotlight requires a clean cut-out with a void above the ceiling.

Distance between ceiling spotlights: the markers to check

No single distance works for every room: it depends on the width, the number of points and the ceiling height. Above all, aim for regular rows, aligned with the furniture and kept away from the walls. A spotlight track is adjusted after installation, which forgives an imperfect plan, just as an adjustable point compensates for an approximate alignment.

Which halogen spotlight should you choose for each room?

The type of spotlight follows the use of the room as much as the style. Each row states the intended use and the point to check before ordering.

Which halogen spotlight for which room
Room Intended use Suitable spotlight type Point to watch
Living room General lighting or highlighting a wall Recessed or adjustable Row alignment and number of points
Kitchen Worktop lighting Adjustable, on the ceiling or under a cabinet Glare and shadows cast on the worktop
Bathroom Localised light in front of the mirror Spotlight for damp rooms Ingress protection rating suited to the zone
Outdoors Facade, terrace, path Outdoor spotlight, with a sensor if needed Exposure to rain and splashes
Bedroom Soft supplementary light Adjustable, aimed at a wall Avoid the light point in line with the bed
Worksite Temporary, movable lighting Worksite spotlight on a stand Temporary fixing and power supply

In a kitchen, aim the points at the worktop rather than at the floor: see the kitchen spotlights. In a bathroom, sealing comes before finish, hence the choice of bathroom spotlights. Outdoors, exposure to rain requires a fixture designed for it, such as outdoor spotlights.

What is the difference between LED and halogen?

An halogen spotlight gives a warm, direct light, with significant heat output and higher consumption for comparable brightness. An LED spotlight produces little heat, lasts longer and comes in several shades of white. The base is often identical, which makes switching from one technology to the other possible.

Halogen spotlight and LED spotlight: what changes
Criterion Halogen spotlight LED spotlight What to remember
Consumption at comparable brightness Higher Lower Decisive in a room lit for long periods
Heat output High Low To consider near a wall cabinet
Service life Shorter Longer Fewer replacements to plan
Light colour Warm white Several shades of white The effect changes the mood of the room
Contact with the bulb To be avoided No consequence Handle with a clean cloth
Dimmer compatibility Depends on the model To be checked Test spotlight, transformer and dimmer

In a room lit for several hours a day, the difference is paid at every bill and every replacement: this is where switching to LED spotlights is most justified. The same grid applies to the rest of the home, including fixtures that are not recessed, to be read in all our light fixtures.

Is it possible to replace a halogen spotlight with an LED spotlight?

Yes, in most cases: an LED bulb fits a GU10 base, and 12 V models exist in GU5.3. You must check the base, the supply voltage and compatibility with the transformer or dimmer already in place before ordering.

GU10 halogen spotlight: the simplest replacement

The GU10 base is identical on both technologies: remove the halogen bulb and fit an LED bulb for halogen in the same format. Just check that the housing accepts the size of the new bulb. The GU10 bulbs and spotlights cover this case.

12 V halogen spotlight in GU5.3: what to check

At 12 V, the bulb runs through a transformer: note the base, GU5.3 or G4, the location of the transformer and the presence of a dimmer. An old transformer can make an LED model flicker. In that case, compare with the recessed LED spotlights, often supplied with their own driver.