Glass spotlights

This selection is also available in our French store: Spots en verre

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right light output?
Allow about 100 to 300 lumens per m²: about 150 lm/m² for a living room, about 350 for a kitchen. Each product page lists the lumens.
At what height should the light be installed?
Above a table: 70-85 cm from the tabletop; in a walkway: at least 2.10 m of clearance below the bulb.
What type of bulb?
Usually E27 or E14, sometimes GU10. Specified on each product page.
Compatible with LEDs and dimmers?
Yes, in most cases; for use with a dimmer, look for the “dimmable” mention.
Glass spotlights
Designix · Design lighting

Light changes everything

From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Choose a glass spotlight first by its glass: frosted for soft, glare-free light, smoked to filter, ribbed to create a pattern. Then comes the mounting type, recessed, adjustable or surface-mounted, followed by the trim colour, which must match the ceiling and the rest of the room.

What is a glass spotlight and what light does it give?

It is a light point whose visible part is made of glass. The glass does not change the power of the source, it changes the way the beam comes out: it diffuses it, filters it or shapes it. That is what decides visual comfort in the room.

Recessed glass spotlight: what changes at the ceiling

In the recessed version, only the glass and its trim sit flush: the ceiling stays clean, with no volume hanging down. The light falls downwards and illuminates a precise surface rather than the whole room. It is the format suited to standard ceiling heights, around 2.50 m, when you do not want a low-hanging fixture. For a living room, see the recessed spotlights for living rooms; for an installation already fitted with LED, the LED living room spotlights save you from changing the source.

Clear, frosted or ribbed glass: the light rendering

Clear glass lets the source be seen and can glare when you look up: keep it for high or offset points. Frosted glass diffuses and softens, it is the default choice above a table or a worktop. Ribbed glass projects a pattern and structures the light, to keep for an accent area rather than for lighting a task.

How to choose a glass spotlight among the models?

Three criteria in this order: the mounting, the glass finish, then the socket and the source specified on the product sheet. This collection contains no spotlight for the moment: no socket, IP rating or dimension information is available in it.

Black or white glass spotlight: which finish to choose?

White blends into a light painted ceiling and becomes almost invisible: it is the choice for rooms where the fixture should not draw the eye. Black draws a clean line and highlights the position of the points, useful for rhythm along a corridor or a light wall. The white models and the black finishes compare on this effect alone, with the same source.

Design glass spotlight or discreet glass spotlight?

A worked glass, globe, tube or faceted, is visible both off and on: it counts in the decor and goes where it is looked at, hallway, living room, above a piece of furniture. A simple glass fades away and lets the light speak. The design spotlights and the modern style spotlights cover these two intentions, rarely the same room.

Recessed, adjustable or dimmable glass spotlight
Type What it brings Where to favour it What to check
Recessed glass spotlight Sits flush with the ceiling and frees the surface Living room, kitchen, corridor False ceiling depth and clearance
Adjustable glass spotlight Lets you direct the beam Wall, worktop, picture Rotation range and fixings
Dimmable glass spotlight Adjusts the light intensity Living room, bedroom, dining room Compatibility of the source and the dimmer
Design glass spotlight The glass becomes a visible pattern Hallway, living room, accent area Match with the other fixtures

Where to install glass spotlights in the home?

The room decides the mounting type and the rendering. In a corridor or a hallway, corridor spotlights mark the passage without glare: points aligned along the wall, frosted glass. In a kitchen, the LED spotlights for kitchens are installed above the worktop, never right behind the head of the person preparing. For a bathroom, check on the product sheet the protection provided for humidity before ordering.

Which glass spotlight for which room
Room Type of glass spotlight Desired rendering Point of vigilance
Living room Recessed or adjustable Soft halo above a table or a wall Avoid direct reflection on a screen
Kitchen Recessed above the worktop Even light on the work areas Do not place a spotlight behind the head
Corridor and hallway Surface-mounted or recessed Mark the passage without glare Spread the points along the wall
Bathroom Model intended for damp rooms Soft light around the mirror Check the protection stated on the product sheet
Bedroom Adjustable or glass wall light Reading and atmosphere Direct the beam away from the bed

How many spotlights in a kitchen and how to arrange them?

No single rule: the number follows the length of the worktop and the position of the tall units. The points are placed above the work and circulation areas, with regular spacing, then you check that no point lights an empty space.

Spreading the light above the worktop

Think in strips: one line above the worktop, another for the passage. If the tall units come down low, move the points towards the front of the worktop so the light reaches the surface. The kitchen recessed spotlights serve this role; if the room is already fitted with LED, compare with the recessed LED for kitchens.

Avoiding cast shadows and glare

A spotlight placed behind the user casts their shadow on what they are cutting. Clear glass in the line of sight glares. Shift the points towards the wall, favour frosted glass and test the position standing up before drilling.

How to arrange spotlights on the ceiling?

First draw the areas to be lit, then align. A pencil plan, with the table, the worktop and the passages, saves you from drilling twice. For spacing, keep a regular distance between the spotlights and align them on an axis parallel to the wall or the worktop. The distance depends on the ceiling height and the beam, but a constant gap is enough to avoid dark zones.

Alignment, symmetry and distance between spotlights

Align the points on an axis parallel to the wall, or in symmetry with the centre of the room. Keep regular spacing: it is irregularity that creates dark zones, not the distance itself. For a beam to direct, see the adjustable LED spotlights.

Arranging around a central fixture

If the room keeps a central fixture, the spotlights form a ring or two side lines, without competing with the centre. The whole then reads as a single lighting scheme: browse the Designix lighting range to match the two.

How to wire spotlights in series or in parallel?

In series, the spotlights are connected one after the other and depend on the same current path. In parallel, each spotlight gets its own feed from the supply and stays independent. Always switch off the power at the breaker before working and follow the instructions for the model.

Series wiring: a chain of spotlights

This setup suits a small number of points that switch on together, on a single line. It becomes painful to troubleshoot: one cut point switches off the chain. Keep it for short, accessible installations.

Parallel wiring: independent points

This is the usual setup in a living room: each spotlight keeps its own feed, a failure does not take the others down. It is also the condition for controlling the whole with a dimmer; compare the dimmable spotlights and the dimmable LED lighting depending on the source chosen.

Which spotlight to choose in insulating glass wool?

The sensitive point is not the spotlight but the space around it. Choose a model whose sheet states compatibility with the false ceiling and the insulation, or protect the area as described in the instructions. Never compress the wool against the body of the fixture.

Respecting the clearance around the spotlight

The insulation must stay at a distance from the heated body. If the wool is packed against it, heat builds up. Clear the crown provided and, if in doubt about the installation, have it checked by an electrician: this is a safety point, not an aesthetic one.

Choosing a model suited to the false ceiling

Check the depth available above the panel and the thickness of the insulation. A model that is too deep will not fit. For a metal frame, look at the metal spotlights; on a dark ceiling, the recessed LED in black limit the hole effect.

How to match glass spotlights and glass wall lights in the same room?

Keep a single glass family and vary it: ball, tube, smoked or ribbed. Repeating the material links the light points without making them identical, and avoids the patchwork effect.

Glass ball wall light or glass tube wall light: the link with the spotlight

The ball echoes the curve of a globe on the ceiling and softens a wall; the tube extends a horizontal line and accompanies aligned spotlights. Choose the shape that repeats the glass already installed. A glass lampshade for a bedside lamp can extend the same material in the bedroom, with no product link.

Smoked glass wall light and ribbed glass: matching without overloading

Smoked glass filters and shows few marks, practical on a light wall. Ribbed glass diffuses a pattern and requires keeping the same direction of ribs from one point to another. Stay at two glass finishes maximum per room. For light models, start from the white LED spotlights and complete with black adjustable ones only if the contrast is intended.

The choice therefore comes down to three lines: the mounting, the glass, the finish. Note the ceiling depth and the socket before ordering, then confirm the chosen reference with the product sheet.

Frequently asked questions about glass spotlights

What is a spotlight?

A spotlight is a light point designed to illuminate a precise area, on the ceiling or on the wall. In glass, the visible part diffuses the beam and softens the rendering. It differs from the wall light, fixed to the wall, and from the central fixture that lights the whole room.

How to restyle a glass table, and can it be covered with wood?

Restyling a glass table is a matter of interior design: top colour, base, seating. Covering it with wood means checking the fixing, the thickness and the weight supported by the base. To highlight it, an adjustable spotlight on the ceiling or a glass wall light nearby creates a halo without direct reflection.

Which glass lampshade for a bedside lamp?

It is chosen according to the socket diameter and the type of fixing, stated on the lamp. Frosted glass gives a soft light, ribbed glass a more marked pattern. Check the opening and the height before buying.

Smoked glass wall light or ribbed glass wall light: how to choose?

Smoked glass filters the light and shows fewer marks; it suits light walls and muted atmospheres. Ribbed glass diffuses a visible pattern and structures the light. Choose according to the desired rendering and keep the same glass family as your spotlights.

Can you mix several glass finishes in one room?

Yes, provided you stay at two finishes and distribute them by area: one finish for the ceiling points, another for the wall. Beyond that, the room loses its unity and each fixture seems chosen separately. The colour of the glass, for its part, must stay constant from one point to another.

Our advice for choosing
This selection brings together glass spotlights that cast a softened light on the ceiling or wall, with finishes and sizes to match the room. It helps you choose the mounting type, the light output and the colour of the glass.