Double wall light

A double wall light projects two beams from a single wall fixture: it frames a mirror, lights both sides of a landing, or marks a facade. Choose it first by room and arm spacing, then by socket (G9, E27, E14, GU10 or integrated LED) and by the protection rating shown on the product page.

How do you choose a double wall light for each room?

A double wall light replaces two light points with a single wall fixture. Choose it first by room: two close beams to frame a mirror, wider arms for a large living room wall, an IP65 aluminium model for outdoors. The G9 socket or integrated LED then lets you adjust brightness and rendering.

Double wall light

Arm spacing decides the use. A wide model such as the Éclat Urbain industrial double wall light, given as 79 cm x 16 cm in its double version, covers a large living room wall. A compact 18 cm format suits a bedroom or a narrow hallway better. Mounting height follows the eye: around 1.60 m to 1.80 m from the floor for everyday use. Two light points are often better than a central ceiling light for drawing a wall.

Double bathroom wall light

Materials that age well near water are glass, acrylic and aluminium. Mount the fixture above or on either side of the mirror to avoid shadows on the face. Check the protection rating on the product page: many pieces are IP20, others are rated IP65. Bathroom wall lights and glass wall lights suit this use well.

Which wall light lights a living room well?

Look at useful power and beam direction. A double G9 wall light takes replaceable bulbs, an integrated LED version gives a continuous rendering, often in warm white, softer in a living space. An adjustable model lets you aim a wall or a reading corner.

Powerful LED wall light

A wall light lights a wall, not a whole room: it is accent lighting, not a replacement ceiling light. The wattages in the selection range from 6 W to 25 W. The choice is therefore about the rendering you want rather than a race for watts. Integrated LED versions avoid changing bulbs, G9 models leave the colour temperature free.

Powerful living room wall light

For a living room, a model with two wide sources marks a seating wall or frames a bookcase. The Gair wall light, in metal, acrylic and aluminium, comes in several lengths and stays in warm white. A more graphic model such as the Taro modern iron wall light plays with direct emission on a wall section. To vary temperatures by time of day, keep a replaceable socket: between 2700 and 3500 K for a soft mood, between 4500 and 6500 K for a sharper rendering. Find these ideas in living room wall lighting and modern living room wall lights.

Original wall light or boho chic wall light: how do you move away from the standard model?

The most original models play with the shape of the diffuser: globe, sphere, tube, or an aluminium cube with double up and down emission. A boho chic wall light relies on a linen or fabric shade, a gilded or patinated metal, and a warm, low light that sets a mood rather than providing functional lighting.

Original wall light

In the selection, tube shapes make up the largest share, followed by spheres and rounds, then globes. An aluminium cube such as the Uaso up and down cube outdoor wall light, given as 10 x 10 x 10 cm, brings a clean, space-saving silhouette. Sphere wall lights and round wall lights soften a straight wall, in a bedroom as well as a hallway.

Boho wall light

Linen and fabric diffuse a subdued light, with no direct glare in the eyes. They pair with gilded or bronze metal, as on the Chandelier wall light, in metal, glass and fabric, E14 socket, which accepts a dimmer. These materials fit well in bedroom wall lights and near a reading corner, where you want low light rather than general lighting.

What are the trends for wall lights in 2026?

Two directions are emerging: minimalism, with geometric shapes, slim tubes and integrated LEDs in warm white, and the return of raw materials, concrete, iron and black metal. The country chic spirit, with gilded or patinated tones and linen shades, appeals to interiors that mix old and contemporary.

Country chic wall light

The country chic wall light remains a safe choice for anyone who wants to avoid a cold, technical wall. It is recognisable by its soft materials (linen, fabric, patinated metal) and warm tones. In the selection, gilded and bronze finishes appear on only a few references, which makes choosing quicker. These models pair well with a gilded finish combined with a light-toned painted wall, in a bedroom or dining room.

Gilded finishes and black metal

The colours found in the collection are mainly black and white, in equal parts, then gilded, grey and brown. The black and metal contrast dominates the industrial spirit, carried by black finishes and metal wall lights. For a living space, white and aluminium blend better into a light interior. Modern wall lights cover both directions, from the discreet tube to the graphic double arm. Nickel or chrome finishes are not offered in this collection.

Which wall light for a staircase, hallway or entrance?

On a staircase or in a hallway, the double wall light lights two levels or both sides of the same wall without multiplying ceiling points. Favour a compact format, in metal or concrete, with direct and indirect emission, placed at the rhythm of the flight to guide the step without glare.

Staircase wall light

Rhythm matters more than power: one wall light every two to three metres along the flight gives a regular line. Models with direct and indirect emission, such as the concrete wall light with two G9 sockets (H 180 mm, W 70 mm, projection 110 mm), project a halo upwards and downwards without dazzling the step. Stairwell wall lights and hallway models gather these low-projection formats.

Double lighting wall light

On a landing or in an entrance, two sources in one fixture light the passage area and the opposite wall. The ZAMBELIS 8W direct and indirect reference, at 300 x 80 mm, stays discreet above a door, in warm white. For a deeper entrance, the E433 outdoor wall light works in direct and indirect and suits both a porch and a sheltered passage.

Which wall light for a toilet or a bathroom?

In a toilet as in a bathroom, the wall light often replaces the ceiling light above the mirror: two sources frame the face without casting shadows. Choose a material that withstands ambient humidity, glass, acrylic or aluminium, and check the protection rating on the product page.

Design toilet wall light

In a small space, format decides before style. A sphere, a round or a shallow linen wall light sits above or beside the mirror without taking over the wall. A single double wall light is often enough to light both sides of the mirror, avoiding two drill holes. White wall lights visually disappear on a light wall.

Toilet wall light

Glass and acrylic wipe clean with a soft cloth and cope with daily steam. Stick to what is written on the product page: a wall light rated IP20 is not designed for direct water spray, an IP65 wall light such as the E433 aluminium reference takes more. For light, a warm white between 2700 and 3500 K stays more flattering near a mirror than a cold white.

Weatherproof outdoor wall light: what should you check before buying?

Outdoors, look at the protection rating and the material before style. The relevant models in the selection are rated IP65, in aluminium, with direct and indirect emission that marks the wall without sending light up to the sky. A 10 x 10 x 10 cm cube sits near an entrance or along a path.

Double outdoor wall light

Aluminium resists temperature swings and humidity better than painted metal. Mount the fixture away from direct run-off areas, on a flat surface, with plugs suited to the wall. The Toril wall light, in metal, glass and aluminium, is rated IP65 and works in warm white as well as cold white depending on the bulb or setting. Indoor models must not be repurposed onto an exposed facade.

Double beam wall light

Up and down mounting makes the most of both directions: the lower beam lights the ground and secures a threshold, the upper beam highlights the material of a facade or post. This is the principle of the Uaso aluminium cube, 10 x 10 x 10 cm, IP65. The effect stays graphic as long as the spacing between two wall lights remains regular.

How do you install and maintain a double wall light?

Mount the fixture at working height, on either side of a mirror or at the top of a staircase flight, checking arm spacing before drilling. The socket is chosen before purchase, G9, E27, E14, GU10 or integrated LED, and some models accept a dimmer. Clean with a soft cloth.

Adjustable double wall light and spotlight

An adjustable version lets you aim each source at a wall, a worktop or a reading corner. It suits living rooms and rooms that change use, and joins the uses of a kitchen wall light placed above a worktop. A fixed version, with direct and indirect emission, gives a more regular rendering, suited to hallways and facades.

Which socket for a double wall light

G9 equips most double wall lights and lets you replace the bulbs. G4 concerns small bedroom models, E27 and E14 the wall lights with shades, GU10 the spotlight versions. Bedroom wall lamps often favour a compact socket to read without lighting the whole room.

A double wall light with an integrated LuxLumina reading light solves the case of a bedroom where you want to light a book and the wall at the same time. To go further, browse all wall lights and the Designix lighting catalogue.

Secure payment, tracked delivery, returns and Designix customer service: order with peace of mind and check arm spacing before drilling.

Frequently asked questions about the double wall light