Dimmable LED floodlights
This selection is also available in our French store: Projecteurs LED à variateur
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
No products in this selection.
Frequently asked questions
How do I choose the right light output?
At what height should the light be installed?
What type of bulb?
Compatible with LEDs and dimmers?
Light changes everything
From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Start with the location, then the intensity you need, then the mounting: that order decides which dimmable LED spotlight to choose. A dimmable model is controlled from a wall dimmer, a rotary control or the luminaire remote, and is chosen above all for its compatibility with the dimmer already in place.
What is a dimmable LED spotlight?
A dimmable LED spotlight is an LED lighting unit whose intensity can be lowered and raised from a wall dimmer, a dedicated control or the luminaire driver. It lights strongly when needed and reduces light the rest of the time, without changing the fixture.
Dimmable LED spotlight: what dimming changes day to day
Check the compatibility between the dimmer and the spotlight driver, as well as the minimum load. You are not multiplying light points: you modulate the one already installed. That is what sets dimmable LED lighting apart from a simple on/off spotlight.
Dimmable LED spot or spotlight: two different uses
A spotlight concentrates light far away, on a facade, a plot or a large volume. A spot carries it over a shorter area or onto a detail. Both can be dimmable, but a spotlight is chosen for reach and a spot for proximity. To compare the available families, browse all the spotlight families, then see the LED spotlights.
How does triac dimming work?
Triac dimming cuts part of each current cycle to reduce the power sent to the LED. The dimmer acts like an electrical tap: the more current it lets through, the brighter the spotlight. The LED needs a compatible driver so the decrease stays gradual and flicker-free.
Triac dimming: why the spotlight driver matters
The driver is the electronics that power the LED. If the dimmer reduces the current but the driver is not designed for that cut, the light drops in jumps or will not go below a certain threshold. A compatible LED driver accepts dimming and makes it smooth.
Dimmer and LED: what causes flickering
Flickering almost always comes from two causes: a dimmer intended for halogens, or a load too low compared with the dimmer minimum. A single spotlight of low power can fall below that threshold. In that case, a dimmer rated as LED-compatible solves the problem.
Which dimmer for a dimmable LED spotlight?
The dimmer must match the spotlight load: a model intended for LED, whose power range brackets that of the luminaire. Also check the type of control, wall-mounted, rotary or built into the spotlight, and the compatibility stated by the manufacturer. A dimmer designed for halogens does not behave the same way with an LED.
Dimmable LED spot: the criteria that matter
Three criteria decide: the dimmer load range, the type of control and the number of points controlled. If you dim several luminaires on the same circuit, add up their load and check it stays within the stated range. Beyond that, the dimmer heats up or cuts out.
Wall, rotary or built-in control: which one to choose?
A wall control adjusts a whole circuit from a fixed point. A rotary control can be found by touch, handy with gloves on. A control built into the spotlight avoids any work. To widen your choice, look at the rechargeable LED spotlights and the solar LED spotlights, which are controlled without wall wiring.
| Solution | How it works | What it brings | Watch out for |
|---|---|---|---|
| Sliding wall dimmer | Meters the power sent to the circuit | Continuous adjustment from a fixed point | Minimum load and LED compatibility |
| Rotary dimmer | Adjustment by rotation with a visual marker | Simple to use, even with gloves | Less precise at low intensity |
| Control built into the spotlight | Controlled from the luminaire or its remote | No work on the circuit | Depends on the model and its documentation |
| Several points on the same circuit | LED strip or luminaires controlled together | Even ambience over an area | Do not exceed the dimmer load |
Where to install a dimmable LED spotlight?
A dimmable LED spotlight goes anywhere the intensity must change with the moment: facade and outdoor path, terrace and garden for evenings, garage and workshop for working, utility room or technical room. In a damp or submerged area, the protection rating becomes the decisive criterion.
Dimmable LED lighting for a facade, a path or a terrace
On a facade, a narrow beam and precise aiming avoid lighting up the neighbours. On a path or a terrace, the setting follows the time: strong when passing, soft in the evening. Waterproof LED spotlights and outdoor LED spotlights cover these uses, with adjustable wall-mounted models.
Dimmable spotlight in a garage or workshop
In a garage, you want clear light to work and low intensity to move around. The mounting must be solid and the heat sink clear, as the spotlight heats up more in continuous use. The control goes near the entrance. Garage spotlights and industrial-style LED spotlights meet this need.
| Area or room | Type of spotlight to favour | What to check |
|---|---|---|
| Living room | Adjustable spotlight fixed to the wall or ceiling | Wide beam, colour temperature suited to the mood |
| Garage or workshop | Fixed high-intensity spotlight | Solid mounting, heat dissipation, aiming |
| Terrace or path | Adjustable outdoor spotlight | Suitable protection rating, narrow beam |
| Garden | Wall-mounted or stake spotlight | High protection rating, moisture resistance |
| Pond or submerged area | Recessed pool spotlight | Maximum watertightness, installation designed for water |
| Technical room or utility room | Compact fixed spotlight | Closed housing, easy access for maintenance |
How to read power, beam and protection rating?
These three figures decide the real use. Power indicates consumption, the beam, wide or narrow, determines the area covered, and the protection rating says where the spotlight can be installed: under cover, outdoors exposed or near a pond. Colour temperature sets the mood, from warm white to cool white.
Powerful LED spotlight: wide beam or narrow beam?
A wide beam covers a whole surface, such as a yard or a workshop. A narrow beam reaches far onto a precise point, facade, gate or tree. Among the 34 products in this collection, look at the stated angle rather than power alone: a very powerful spotlight aimed badly dazzles without lighting any better.
Warm white or cool white: which temperature for which place?
Warm white (around 2700 to 3000 K) gives soft light, suited to the living room, terrace and garden. Neutral white (around 4000 K) renders colours naturally, useful in garages and traffic areas. Cool white (above 5000 K) contrasts strongly and suits facades and outdoor work areas.
Does the dimmer also work on a ceiling light, a wall light or an LED chandelier?
Yes, provided the luminaire is dimmable and the dimmer is intended for LED. A living room LED ceiling light, an LED wall light or an LED chandelier is controlled in the same way as a spotlight, with identical compatibility rules. Ceiling LED lighting is often dimmed from a wall dimmer.
Powerful LED ceiling light and modern LED ceiling light: the same dimming logic
A dimmable ceiling light follows the same constraints: compatible driver, minimum load respected, single control for the whole unit. The adjustment mainly serves in the evening, to move from work light to ambient light without changing the fixture. See all our luminaires to spot the dimmable models.
LED wall light and LED chandelier: where to place the control?
An LED wall light is dimmed from the circuit that powers it, with the same compatibility as a spotlight. For an LED chandelier, place the control at the entrance to the room, reachable without crossing the lit area. Our luminaire catalogue gathers these families, and the spotlight collection covers outdoor and technical uses.
How to install and maintain a dimmable LED spotlight?
Installation follows that of a standard spotlight: power off, accessible junction box, mounting in the intended bracket, then connecting the dimmer to the circuit. Tighten without forcing and respect the wire direction. For maintenance, dust the heat sink fins: a spotlight that heats up less lasts longer.
Dimmable LED spot: wiring and identifying the wires
Switch off the breaker, then identify the live, neutral and switched live. Connect the dimmer according to its diagram, generally in series on the luminaire supply. Never work live, even briefly. If any doubt remains about identification, entrust the connection to an electrician.
Heat sink and cleaning: what extends service life
An LED spotlight heats up, especially in continuous use. Dust accumulated on the heat sink prevents heat from escaping and shortens the life of the electronics. Dust dry twice a year, and check that nothing blocks the back of the housing outdoors.
Which mistakes to avoid and how to order well?
The most frequent mistakes: pairing an old dimmer with an LED spotlight, staying below the dimmer minimum load, or installing a non-waterproof model in a damp area. To choose, start from the location, then the intensity needed, then the mounting. Secure payment, tracked delivery, returns and Designix customer service.
Incompatible dimmer and spotlight: the warning signs
Flickering, buzzing or a low threshold that refuses to go down signal an incompatibility. Most often, the dimmer is not intended for LED or the load is too low. A compatible LED model, with the right load range, removes these symptoms.
Damp area and minimum load: the oversights that cost dear
In a damp or submerged area, the protection rating comes before everything else: a garden spotlight or an exposed facade does not call for the same housing as a pond. For the latter, turn to concrete pool spotlights and to garden lighting for beds and paths.
Need detection as well as dimming? Look at the LED spotlights with motion sensor and the free-standing LED spotlights for installation without wall mounting, or the RGB LED spotlights if you also want colour. For your order, start from the area to light, then check the dimmer compatibility and the intended mounting.
Frequently asked questions about dimmable LED spotlights
What is triac dimming?
Triac dimming is a dimming technique that cuts each current cycle to meter the energy sent to the luminaire. The triac dimmer works with a compatible LED driver. It remains the most widespread solution for modulating a spotlight from a wall control.
What is an LED spotlight?
An LED spotlight is a compact lighting unit that concentrates light towards an area: facade, path, plot, workshop or pond. It combines an LED source, a driver and an often adjustable housing. Depending on the model, it is fixed to the wall, the ground or a support, and some accept a dimmer.
How do you install an LED light dimmer?
Switch off the circuit, identify the live, neutral and switched live, then connect the dimmer according to its diagram, generally in series on the luminaire supply. Tighten the terminals without forcing and close up before restoring power. If the dimmer controls several points, check that the total load stays within its range.
Why does my LED spotlight flicker when I lower the intensity?
Flickering almost always comes from an incompatibility between the dimmer and the LED driver, or from a load too low compared with the dimmer minimum. A dimmer intended for halogens, a single low-power LED or a bad contact can also cause it. A dimmer rated as LED-compatible solves the problem.
Dimmable LED lighting: does it use less power?
Lowering the intensity reduces the power drawn by an LED spotlight, and therefore consumption. The saving depends on the time spent at reduced intensity and on the type of driver, but the logic stays the same: less current sent, less energy consumed, without changing the luminaire.
Power off, compatible load, mounting suited to the support: these three checks are enough to choose a dimmable LED spotlight that will work first time. To go further, explore our selection of LED spotlights and the Designix luminaire world. Secure payment, tracked delivery, returns and Designix customer service support you right through to installation.
