Glass lampshades in transparent color

Count on an E27 base and check the opening before buying: the entire selection screws onto a standard socket, in clear or smoked glass, in just a few minutes. The shape then decides the light: the ball diffuses around, the drop goes downward, the hemisphere covers wide.

Which clear glass lampshade to choose for a bedside lamp?

For a bedside lamp, aim for a small size: 15 cm in diameter for 11.7 to 20 cm in height, with a single E27 socket. The drop shape concentrates light downward, the ball diffuses it around the table. Smoked glass softens the brightness, clear glass lets you see the bulb.

What diameter for a bedside lamp shade?

On a bedside table, 15 cm in diameter fits on almost all bases and leaves room for a book and a glass of water. Two heights are available in the selection: 11.7 cm for the small ball format, 20 cm for the drop with circular opening. Beyond that, the glass drops into your field of view when reading lying down. Measure the base, keep a few centimeters between the bottom of the glass and the tabletop, and look at a lampshade for the bedroom if the room requires multiple light sources.

Clear or smoked glass on a bedside lamp?

Clear glass shows the bulb: practical if you like to see the source, less pleasant if it dazzles. Smoked glass reduces brightness without turning off the lamp, which suits late reading. The small Brillanta lampshade offers both finishes, and Vesia and its circular opening let light escape from the bottom.

Clear glass lampshade or smoked glass: what light in the room?

Clear glass lets light through and shows the bulb: the room stays bright, the fixture's design is visible. Smoked glass reduces brightness and softens the outline of the source. In both cases, the base is E27 and the protection rating is IP20, so for dry indoor rooms.

The choice therefore comes down to two factors: the degree of diffusion, from clear to grey, and the volume of the glass. A child's room often settles for a soft finish, similar to the baby's room. A living room can handle larger, clearer glass, like those gathered in models designed for the living room.

Glass lampshade for a floor lamp: which size to choose?

On a floor lamp, the large hemispherical format of 38 cm in diameter for 28 cm in height fills the volume above the base; the 25 cm size suits a thinner base. Check the opening and the E27 socket before ordering, and keep the proportion: a lampshade that is too large overwhelms a narrow base.

The large hemispherical size on a floor lamp

The Emisfera hemispherical version covers wide and projects light downward and to the sides, which illuminates an armchair without lighting the entire living room. Its grey glass and plastic base make it less visually heavy than solid glass. For a square-section base or a very understated interior, the modern lampshade selection contains more contained volumes.

Can a glass lampshade stay outside?

No: the IP20 rating of the entire selection does not protect against moisture. An outdoor floor lamp requires a fixture designed for outdoor use, not an indoor lampshade. To contrast with a light wall, look at the black option for contrast.

How to install a glass lampshade on an E27 socket?

Turn off the power, remove the old lampshade, then check that the opening matches the socket. Place the glass on the E27 socket and tighten moderately: the glass will crack if forced. Then screw in the bulb and turn the power back on. The operation takes a few minutes, with no special tools on most lamps.

The steps in order

Unplug the lamp or turn off the circuit breaker, let the bulb cool, unscrew it. Remove the old lampshade, compare the opening of the new one with the socket, then screw on the ring or tightening screw without forcing. Replace the bulb and restore power. If you are unsure about the support, the pendants, table lamps and floor lamps section groups the three families.

Which E27 bulb to use under a glass lampshade?

Respect the maximum wattage indicated on the socket or the fixture's instructions, that is the only value that matters. A filament bulb gives a warm rendering that is visible through clear glass; a larger model may touch the glass, so keep some air around it. Avoid connected bulbs with bulky heads under a small 11.7 cm high format.

How to hang a lampshade from the ceiling?

On the ceiling, it is a pendant: the cable and socket are fixed to the support, then the glass lampshade is screwed onto the socket. Turn off the power before working, check the fixing and keep the glass away from impact areas. These models are IP20, so for dry rooms only.

Hanging without drilling nearby

Locate the existing fixing point, present the support, mark the holes with a pencil before drilling. If the cable comes out of the ceiling, slide the glass onto the socket after fixing the support, not before. The Nerranisto drop lampshade hangs down 33 cm below the socket, a length that suits a reading corner or a slightly high entryway.

At what height above a table?

The simplest reference is eye level: the bottom of the glass should be above the eyes of seated people, to avoid glare. Allow around 70 to 80 cm between the tabletop and the bottom of the lampshade depending on the table height. The Sphaeris ball at 25 cm in diameter suits a side table, more discreet than a long drop.

Glass ball wall light, ribbed glass wall light: lampshade or complete fixture?

A ball, tube or ribbed glass wall light is a complete wall fixture, with its own socket and fixing. A lampshade, on the other hand, is the piece that dresses an existing E27 socket, on a table lamp, a floor lamp or a pendant. The two look similar in photos, but not in installation.

Ribbed glass cuts light into stripes, an effect that comes from the glass itself and that no smooth lampshade can reproduce. A wall light replaces a wall light point, not a lampshade: it is wired in. If your need is for a wall, start from the luminaire category as a whole rather than a lampshade alone.

How to match a clear glass lampshade with the room's decor?

Clear glass remains neutral: it lets you see the base, the socket and the bulb, and matches wood, black metal and linen. Smoked glass works better against a light background. Ball and hemispherical shapes work well in a living room, the drop in a bedroom where you want low light.

Living room or bedroom: which combinations?

In a living room, a black metal base and smoked glass create a sharp contrast on a white wall. In a bedroom, a light wood base and clear glass remain softer. A colored wall does not pair well with a second tinted glass, so prefer a more discreet white color.

What if you prefer a fabric or linen lampshade?

Fabric closes the light, directs it upward and downward, and completely hides the bulb: more muted, less sharp. Linen brings a visible weave and a warmer rendering. Compare fabric lampshades and linen for a textured finish if the room is looking for material rather than transparency.

How to care for a glass lampshade and when to change it?

With the power off and once cooled, wipe with a slightly damp microfiber cloth and then dry: glass attracts little dust and cleans faster than fabric. Avoid abrasives. On a glass lampshade, there is no fabric to replace: the entire piece is changed on the E27 socket.

How to change a lampshade's fabric?

This applies to a fabric frame: the canvas is peeled off or unpicked, the new material is cut, stretched and fixed. On glass, the question does not arise, the entire lampshade is replaced. Changing the fabric remains possible on the models listed in the lampshade section.

Cleaning a glass lampshade without scratching it

Warm water and a soft cloth are enough; a product that leaves a film shows through the glass. Handle by the frame rather than by the bowl. A cracked glass or a loose ring cannot be repaired: the piece must be replaced. The selection is guaranteed for two years, with secure payment, tracked delivery, returns and Designix customer service for any question about an opening or a size.

Frequently asked questions