LED strips for bathroom

This selection is also available in our French store: Rubans LED pour salle de bain

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
LED strips for bathroom
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Count the usable length first: the perimeter of the mirror or niche, plus the distance to the power supply. Then choose the protection rating according to the distance to water and the colour temperature according to use, from 2700 K in the evening to 4000 K in the morning.

Which LED strip for a bathroom?

The choice comes down to exposure to water, never to style. A strip placed above the mirror, on a cabinet or high up away from splashes can be a standard flexible strip. Near the shower, you need an IP65 sealed sleeve. Where water can stagnate, an IP68 model is essential. Measure the length to be covered before ordering, including the run to the power supply.

IP65 bathroom LED strip: what the sleeve really protects

IP65 stops water jets and steam. The sleeve, in silicone or polyurethane, wraps the strip without making it rigid: the strip stays flexible enough to follow the angle of a tile or the contour of a mirror. This is the standard model above the mirror, under the vanity unit and in a shower niche away from the jets. Our waterproof LED strips bring together these sleeved versions, to be chosen according to the space available behind the support.

IP68 bathroom LED strip: for wet areas

IP68 withstands prolonged immersion: the sleeve is thicker, so the strip is less flexible and a little wider. It is reserved for the bottom of a skirting board, at the edge of the floor or an area that receives water on the ground. For a very wet room, strips for pools and very damp rooms follow the same logic of a reinforced sleeve. A standard unsleeved strip should not be installed in either of these two cases.

Location Exposure to water Protection rating Type of strip
Above the mirror Steam and splashes IP65 Waterproof strip, warm white
Shower niche Direct jets IP65 to IP68 Sleeved waterproof strip, 24V
Under the vanity unit Humidity and cleaning IP65 Waterproof strip in profile
Skirting board and floor edge Possible standing water IP68 Submersible strip
Ceiling and cornice Steam IP65 220V or 24V strip depending on space
Kitchen splashback Steam and grease IP65 recommended Protected strip, warm white

Which light to choose for the bathroom, warm or cool?

Warm white, between 2700 and 3000 K, flatters skin and ceramics in the evening. A more neutral white, around 4000 K, helps you get ready in the morning in front of the mirror. In a small bathroom, this difference is most visible on light tiles and in the steam: the warmer the light, the calmer the room feels.

3000K LED strip: the warm white that makes the room welcoming

3000 K is the easiest compromise to live with: warm enough for a bath atmosphere, clear enough to see yourself. It is the temperature we recommend first above a vanity unit. 3000K warm white strips pair effortlessly with beige tiles, light wood or a lacquered cabinet.

2700K LED strip: an end-of-day light

2700 K steps down towards amber. Placed in a niche or behind a mirror, it draws a halo rather than lighting a work area. For an evening bath, it is the softest result, and the softest 2700K are installed exactly like a 3000 K. If you are unsure between the two uses, RGBW with dedicated white let you alternate coloured ambience and useful white, while RGB versions with variable colour stay in the decorative register.

Where to place an LED strip in the bathroom?

The most useful locations are behind or under the mirror, inside a niche, under the vanity unit and along a skirting board. On the ceiling, the strip is reserved for cornices and suspended ceilings, where it lights without dazzling. Each location dictates its protection rating and its direction of installation.

LED strip for bathroom mirror: light without glare in the eyes

Behind a mirror, the strip is stuck around the edge, LEDs facing the wall, to bounce indirect light onto the tiles. Under the mirror, point the LEDs downwards: the light bounces off the vanity top and lights the face without passing through the reflection. The full range of LED strips covers both setups, from the bare strip to the profiled model.

LED strip for bathroom niche: recessed or surface-mounted

In a niche, the strip slips onto the top shelf, towards the back, to wash the lower wall. Mounted on the underside of the shelf, it highlights objects without lighting them from the front. An aluminium profile ensures a clean line and protects the adhesive from humidity. If you are also looking for the room's general light, compare with all our light fittings before finalising your plan.

220V or 24V bathroom LED strip: which power supply to choose?

A 220V strip connects directly to the mains, with no transformer to house: practical behind a mirror or in a narrow niche. A 24V strip requires a driver, but handles long lengths better and stays at very low voltage at the strip itself. The decision is based on the space available and access to the driver.

220v bathroom led strip: direct connection

The strip has its power supply built in, which removes the box to hide. The connection must stay clean and protected from humidity, with careful marking of the conductors. 220V models without a transformer are suitable for short and medium lengths, typically around a mirror.

24V strip: allow for an accessible driver

The 24V driver is placed in a dry place and stays reachable for replacement, never enclosed in a sealed box. In exchange, the strip stays at very low voltage and handles greater lengths. 24V strips with driver are the usual choice for a shower niche or a continuous line on a cornice.

Criterion 220V LED strip 24V LED strip
Power supply Directly to the mains Requires a 24V driver
Bulk No transformer to house Driver to allow for, dry and accessible
Installation length Short and medium lengths Long lengths, less voltage drop
Proximity to a water point Careful connection essential Very low voltage at the strip
Adjustment Cuts at the marked points Cuts at the marked points

How to install an LED strip in a bathroom?

Clean and dry the surface, mark the usable length, cut the strip at the marked points and press the adhesive on gradually. In a damp room, an aluminium profile or clips prevent the strip from coming unstuck. Switch off the power before any connection, and only switch it back on once the installation is complete.

Which surface to stick an LED strip to in a bathroom?

The adhesive holds on a flat, dust-free and degreased surface. On cold tiles or under the effect of steam, it gives way faster: a screwed profile or clips solve the problem. Avoid sticking to a joint or an uneven surface. IP65 and IP68 references have a heavier sleeve, so often a reinforced original adhesive.

Bathroom ceiling LED strip: points to watch

On a ceiling, the strip is installed hidden, on a cornice or in a suspended ceiling, LEDs facing the surface to be washed: installed flat and visible, it dazzles. A low-voltage strip is chosen for long lines, with the driver placed in a dry place above the accessible ceiling. Plan the cut before sticking, a strip is cut in marked segments and cannot be extended.

What is the lifespan of an LED strip?

It depends above all on the quality of the LEDs, the heat dissipated and the cleanliness of the power supply: generally allow 20,000 to 50,000 hours depending on LED quality and heat dissipation. A strip stuck to a surface that dissipates heat, powered by a suitable driver, lasts much longer than a strip placed on an insulating surface. In a bathroom, humidity accelerates wear when the sleeve is insufficient.

Maintaining a light strip in a damp room

A soft, slightly damp cloth is enough, with no abrasive product on the sleeve. After a shower, let the room air out rather than letting the steam settle back on the strip. Check once a year that the adhesive has not taken on water at the ends. A well-installed flexible light strip needs nothing more.

Why an LED strip turns yellow or flickers

Flickering often comes from a tired driver or a loose connection, not from the LEDs themselves. A drop in intensity at one end signals a voltage drop over too great a length. Yellowing of the sleeve reveals exposure to heat or humidity. In both cases, check the power supply before changing the strip.

Can an LED strip be used for kitchen decoration?

Yes: the same type of strip highlights a splashback, lights a worktop or draws a corner. In the kitchen, avoid wet models and choose a strip protected from steam and grease splashes, in a warm white. It is installed under the wall cabinet, LEDs facing the worktop.

Kitchen decoration: highlighting the splashback

A line of light under the wall cabinets separates the splashback from the rest of the wall and makes the worktop readable without switching on the ceiling light. An aluminium profile makes cleaning easier: grease is wiped off the aluminium, not the adhesive. It is also the simplest way to add warm white mirror lighting and worktop lighting in the same shade.

Modern kitchen decor: the right white

For modern kitchen decor, 3000 K keeps the room warm without turning yellow on a white worktop. A more neutral white suits a very graphic kitchen, but hardens food and crockery. Between the two, an RGBW strip gives colour in the evening and dedicated white during preparation hours. The rest of the catalogue is on our lighting solutions.

Should the LED strip be complemented by another light fitting in the bathroom?

The strip provides ambience and supplementary lighting, not general light. A LED ceiling light provides the room's lighting, a powerful LED wall light lights the face in front of the mirror, and a simple light point is enough in the WC. Choose these sources in the same colour temperature as the strip.

LED ceiling light or LED strip on the ceiling?

The ceiling light lights the whole room at once, with no reflection in the mirror. The strip on a cornice gives a grazing light that visually enlarges the space but is not enough to shave by. If you are replacing several recessed spotlights and do not want to drill again, the continuous cornice is the simplest solution: switch off the power, remove the spotlight, compare the diameter and voltage before reconnecting.

Light fitting for WC and small shower room: what is enough

In a toilet, a compact ceiling light lights the room, possibly complemented by a discreet strip behind the cistern or under a small cabinet. Keep the same shade as the neighbouring bathroom: too marked a difference from one room to another is immediately noticeable. Browse the Designix catalogue to match the two rooms.

Secure payment, tracked delivery, returns and Designix customer service: you order the length and protection rating that match your installation, and you adjust the cut on site.

Frequently asked questions about LED strips in the bathroom

IP65 or IP68 bathroom LED strip?

IP65 protects against water jets and is suitable for wall mounting or under a cabinet, away from the shower. IP68 withstands prolonged immersion and is used where water can stagnate, on a skirting board or at the edge of the floor. The higher the rating, the thicker the sleeve around the strip, so the less flexible the strip is in tight corners.

Can a 220V bathroom LED strip be connected without a transformer?

Yes, a 220V strip has its power supply built in and connects directly to the mains, with no driver to house. However, you need to provide a clean connection, protected from humidity, and respect the marking of the conductors. A 24V strip, on the other hand, requires a transformer placed in a dry and accessible place.

How many metres of LED strip for a bathroom mirror?

Measure the linear length to be covered, the perimeter of the mirror or the length of the niche, then add the length needed to reach the power supply. A strip is generally cut in marked segments, which allows adjustment without losing the rest of the reel. It is better to measure twice before ordering.

Which light fitting for the WC?

In a toilet, a compact LED ceiling light is enough to light the room, possibly complemented by a discreet LED strip behind the cistern or under a cabinet. Keep the same colour temperature as in the neighbouring bathroom to avoid too marked a contrast from one room to another.

How to change a recessed LED spotlight in the ceiling?

Switch off the power at the consumer unit, remove the spotlight by pulling on the springs or unscrewing the ring, disconnect the connector then fit a model of the same diameter and voltage. If you prefer continuous light, an LED strip on a cornice replaces several spotlights without drilling the ceiling again.

Our advice for choosing
This collection brings together LED strips for the bathroom: flexible strips to stick above the mirror, in a niche or along a skirting board, in a waterproof version, in 220V or 24V, in warm white or colour.