90 cm neon
This selection is also available in our French store: Néon 90 cm
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
First measure the length of the tube itself, from one end to the other, excluding the pins, then note the diameter and the cap before ordering anything. This trio decides whether your 90cm neon tube fits the fixture already in place, or whether you need to start over with a complete batten.
How do you measure a 90 cm neon tube?
A 90 cm neon tube is measured on the tube itself, from one end to the other, without the cap pins. Then note the diameter, 26 mm for a T8 and 16 mm for a T5, because two tubes of the same length do not fit in the same fixture.
90 cm neon tube: measure the tube, not the fixture
Place the tape along the glass, not along the batten: the stated length describes the tube, pins not included. A tube rated at 90 cm therefore takes up a little more space once both ends are engaged in the sockets. Allow clearance on each side before fixing anything under a cabinet, and keep the fixture measurement in your notes to compare with our selection of LED neon tubes, whose dimensions follow the same logic.
Pins, G13 cap and centre distance: what blocks an installation
Both sockets must land exactly on the pins. A gap of a few millimetres and the tube stays crooked, or only clicks in on one side. The G13 cap, two pins per end, is fitted to T8 tubes; the thinner G5 is fitted to T5 tubes. Measure the centre distance between the two sockets of the fixture before choosing, then check the diameter: this is the detail that decides between a simple tube change and replacing the batten.
What is the difference between T5 and T8 neon tubes?
A T5 tube measures 16 mm in diameter, a T8 26 mm. At equal length, the T5 is thinner and fits into a narrow profile, while the T8, mounted on a G13 cap, more easily accepts a standard fixture. The choice is therefore made first on the existing fixture, then on the quality of light.
90 cm T8 neon tube: the diameter to check
The T8 is the wide tube found in most garage, utility room and workshop battens. Its 26 mm let through more light over the same length, and its G13 cap remains the most widespread. Before ordering, measure the diameter of the old tube with a caliper or a ruler: a T5 slipped into G13 sockets will not hold, and the reverse is also true.
T5 or T8: which for a narrow cabinet
For a 4 or 5 cm deep niche, the T5 hides better and the light line stays discreet. For a surface-mounted batten on a workshop ceiling, the T8 asserts its presence and can be replaced without a specific tool. The same reasoning applies to neighbouring lengths: a 120 cm neon tube or a 150 cm neon tube are chosen on the same criteria, diameter then cap.
| Criterion | T5 tube | T8 tube |
|---|---|---|
| Tube diameter | 16 mm | 26 mm |
| Common cap | G5 | G13 |
| Reference length | 90 cm | 90 cm |
| Footprint | Slim profile, hides in a niche | Wider, standard on a batten |
| Power supply | Ballast suited to the tube | Ballast and starter, or compatible LED tube |
LED neon or fluorescent tube: what is the difference?
A fluorescent tube works with a ballast and a starter, while an LED neon tube integrates the electronics into the tube or the batten. LED generates less heat, switches on instantly and better withstands repeated switching. The light itself is chosen the same way: same length, same cap, same desired colour temperature.
What LED changes in terms of heat and repeated switching
Under a kitchen cabinet where the light is switched on and off ten times a day, a fluorescent tube tires and takes a few seconds to reach full brightness. An LED neon tube rises to full intensity immediately, without flickering, and generates little heat: a hand placed next to the tube does not suffer. This is what makes the format credible in a closed dressing room or a narrow niche, where air circulates poorly.
Ballast and starter: what to check before changing
Open the fixture and look at what it contains: a magnetic ballast, a starter, or nothing at all. This observation determines the type of tube to buy, ballast-compatible or direct-wired. If you cannot read the label, have the housing opened by an electrician. Also see our full range of light fittings to compare formats before deciding.
Can you replace a neon tube with an LED tube on an old fixture?
It depends on the fixture: some LED tubes work with the ballast in place, others require removing the ballast and starter for a direct connection. Check the compatibility stated on the tube packaging, cut the power at the circuit breaker and, if in doubt, have the installation validated by an electrician.
Ballast-compatible LED tube or direct connection
The compatible tube replaces the old one without touching the wiring: remove the fluorescent tube, click in the LED, switch back on. The direct-connection model requires neutralising the ballast and sometimes the starter, which is not an improvised DIY job. Many households choose the first solution for this reason, and this is where switching to LED neon becomes simple.
The checks to make before mounting the tube
Cut the power at the circuit breaker, not just at the switch. Read the tube instructions all the way through. Compare length, diameter and cap with the old tube. Check that the fixture has no broken part that would prevent the tube from clicking in on both sides. And if the old tube was working poorly, look for the cause before replacing it: a tired starter kills a new tube in a few weeks.
Which light temperature should you choose for a 90 cm neon tube?
The colour temperature is read in the tube code: 827 or 830 for warm white, 840 for neutral white, 865 for cool white, 880 for very cool white. Under a kitchen cabinet, a neutral white makes food readable; in a workshop, a cool white helps to see details.
827, 830, 840: reading a tube's colour code
The first two digits give the colour rendering index, the next two the temperature in hundreds of kelvins: 830 therefore means 3,000 K. A warm white creates an end-of-day atmosphere and suits an entrance or a reading corner. Neutral white remains the most versatile under a worktop. Cool white highlights contrasts and cool tones, never skin.
90 cm 30 W neon tube: what wattage says and does not say
Watts measure consumption, not the amount of light. That is expressed in lumens and also depends on the mounting height: the same tube stuck under a high cabinet does not light the same as when fixed 2 m from the floor. Read both values on the packaging, and bring the tube closer to the surface to be lit rather than increasing the wattage.
| Code | Colour temperature | Rendering | Where to install it |
|---|---|---|---|
| 827 | 2,700 K | Very warm white | Living room, reading corner |
| 830 | 3,000 K | Warm white | Kitchen, entrance |
| 840 | 4,000 K | Neutral white | Worktop, dressing room |
| 865 | 6,500 K | Cool white | Workshop, utility room, garage |
| 880 | 8,000 K | Very cool white | Technical lighting, garage |
Where to install a 90 cm neon tube in the home?
A 90 cm neon tube finds its place where the light needs to be close and even: under high kitchen cabinets, above a worktop, in a utility room, a dressing room or a workshop. Near a water point, check the model's ingress protection rating before fixing anything.
Under kitchen cabinets: the light that works
Fixed directly above the worktop, the batten removes body shadow and makes cutting clean. Aim for a tube centred on the useful area rather than stuck to the back of the cabinet, and keep a reasonable distance from the hob. To compose the whole, see lighting a kitchen and the neon wall lights that extend the line onto the wall.
Utility room, dressing room, workshop: the rooms that forgive less
In a utility room, splashes require a protected housing, an IP44 is generally enough away from the sink. In a dressing room, textile dust settles on the tube and eats the light: a closed model is easier to clean. In a workshop, wood dust and impacts count as much as the flux. The ingress protection rating is not a decorative argument, it is what prevents premature replacement.
How do you fix and maintain a 90 cm neon tube?
The batten is fixed with two screws or clips, respecting the stated centre distance and keeping the pins aligned with the socket. Cut the power before screwing, check that the tube is properly clicked into both sockets, then dust the tube dry or with a slightly damp cloth.
Fixing the batten: centre distance, clips and alignment
Locate the holes on the fixture, mark them in pencil, check with a spirit level: a crooked tube is immediately visible on a worktop. Screw into solid material, not into a hollow partition without a suitable plug. Clips make later removal of the tube easier. If you are hesitating between several fixtures, compare them in batten under kitchen cabinets and in a surface-mounted neon.
Cleaning a neon tube without removing it
Cut the power, let it cool, then wipe with a soft dry cloth. On greasy kitchen deposits, a barely damp cloth is enough, never soaking, and wipe immediately. Dust accumulated on a tube makes it lose a visible part of its light: cleaning twice a year changes the result without changing the bulb.
What is the lifespan of an LED neon tube and what are its drawbacks?
The lifespan of an LED neon tube is expressed in hours and depends greatly on the ventilation of the fixture: an enclosed tube heats up and wears out faster. Its limits are well known: sometimes more directional light, electronics sensitive to overvoltage, and a rendering that does not exactly copy the old fluorescent tube.
Why the lifespan depends mainly on the fixture
A ventilated tube, mounted on an open batten, dissipates the heat from its electronics. The same tube slipped into a closed housing without ventilation runs hotter and loses hours. The quality of the power supply also counts: micro-outages and overvoltages damage the drivers. You will find the open models in LED tubes and battens.
The real drawbacks of LED, without exaggeration
The light of an LED tube can be more directional than a fluorescent, with a slightly different rendering on warm tones. The electronics fear storms and old installations. Finally, not all tubes are equal: read the label rather than the photo. To broaden the comparison, browse the light fitting catalogue as a whole.
Secure payment, tracked delivery, returns and Designix customer service: you order the right length, and if the tube does not fit, you come back to us. Also find a surface-mounted neon wall light and surface-mounted neon for a hallway if your project goes beyond the worktop.
Frequently asked questions about the 90 cm neon tube
How do you replace a fluorescent tube with an LED tube?
Compare the two tubes on length, diameter and cap, then check the stated electrical compatibility. A ballast-compatible LED tube replaces it directly; a direct-connection model requires neutralising the ballast. Note the colour temperature of the old tube before removing it, to recreate the same atmosphere.
How do you fit an LED neon tube on an old fixture?
Identify the fixture and the presence of a ballast or starter. If the LED tube is designed to work with the ballast, replace the tube only; if it is direct-wired, the fixture wiring must be modified. The tube instructions are authoritative, and an electrician validates if in doubt.
90 cm T8 neon tube: which cap is needed?
A 90 cm T8 tube is generally mounted on a G13 cap, with two pins per end. The 90 cm length corresponds to the tube itself, pins not included, and the diameter is 26 mm. Always check the cap marked on the old tube before ordering.
90 cm 30 W neon tube: is that enough for a worktop?
Wattage does not indicate the amount of light: what counts is the flux in lumens and the distance to the worktop. A 30 W tube placed just under a high cabinet does not light the same as the same tube fixed higher. So read both values on the packaging.
Can you install a 90 cm neon tube in a bathroom?
Yes, provided you respect the safety zones around the bath and washbasin and choose a model whose ingress protection rating matches the location. An IP20 is enough away from water, an IP44 is required near splashes. If in doubt, an electrician decides, and choosing a light fitting for the home starts there.





