30 cm neon tube
This selection is also available in our French store: Tube néon 30 cm
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
First measure the usable length of the fixture, pins included: a 30cm neon tube is chosen by its format before its light colour. This small format fits narrow housings, wall lights and under-cabinet spaces where a one-metre tube will not go.
What is a 30cm neon tube for and where should it go?
A 30cm neon tube is used where a one-metre tube will not fit: under a shelf, at the back of a cupboard, in a wall light or a narrow housing. Its grazing light highlights a worktop or a mirror without glare. It is chosen above all by its format and its fixture.
30cm neon tube: under a cabinet, in a wall light or a housing
Under a shelf or a wall cabinet, the short tube draws a continuous line along the whole length of the worktop and removes the shadow of your hands. In a wall light, it runs alongside a bathroom mirror without taking up floor space. In a housing or a cupboard, it lights the back and makes objects visible at a glance. The short length demands precise measurement: take the tube measurement in place, fixture and sockets included, not the measurement of the recess.
Small 30cm neon tube in a damp room or a garage
In a bathroom, a kitchen or a garage, the housing decides before the tube. An open fixture lets moisture and dust through; a closed housing protects the whole. Waterproof tubes for damp rooms meet this need, and for a workshop you look instead at the neon LED for garage, designed for dust and impacts.
What are the dimensions of fluorescent tubes?
A fluorescent tube is described by its length, its diameter and its cap. 30cm is a short format, reserved for compact luminaires; common tubes often measure 60cm or 120cm. The diameter distinguishes the slim T5 from the wider T8. Exact dimensions appear on the model's data sheet.
| Format | Typical use | Diameter | Cap |
|---|---|---|---|
| 30cm | Narrow housing, wall light, under-cabinet, cupboard | Slim (T5) or wide (T8) | Two pins |
| 60cm | Small batten, short worktop, display case | Slim or wide | Two pins |
| 120cm | Garage, workshop, office, corridor | Slim or wide | Two pins |
| 150cm | Long length, workshop, technical room | Slim or wide | Two pins |
30cm fluorescent tube, 30cm fluo tube: what these names mean
Fluorescent tube, fluo tube, neon: the three words mean the same thing in everyday language. The technical term remains fluorescent tube, and it now includes LED tubes that take the same shape. So when you look for a neon tube, check the technology stated, because the two families look alike on the shelf. LED tubes are recognised by the LED mention and the absence of a starter.
Round 30cm neon tube: when to prefer a circle to a line
The round 30cm neon tube, often called a light circle, suits ceiling lights and circular luminaires. It diffuses downwards without creating a blind spot, which makes it useful in a small corridor or an entrance. On a shelf or a worktop, the straight line remains more effective: it follows the surface to be lit. The circle is a choice of luminaire, not a choice of worktop lighting.
What is the difference between T5 and T8 neon tubes?
The T5 is the slimmest tube: it fits into compact battens and often comes in an LED version with the ballast built into the fixture. The T8 is wider, with a pin cap that equips most classic tube luminaires. The choice therefore depends on the fixture first, then on the light wanted.
What the cap changes on the fixture
The pin cap is the point of contact between the tube and the luminaire. Two tubes of the same length can have different pins, and a tube that will not fit into the sockets has nothing to do with a power problem. Before buying, compare the cap of the tube in place with that of the new tube; it is the only check that avoids a product return.
What the diameter changes in light and consumption
A slim tube leaves more room in a shallow housing and is less noticeable once switched off. A wide tube often lights more broadly and equips older luminaires with a magnetic ballast. In the LED version, the diameter stays identical to that of the replaced tube, but consumption drops and start-up becomes immediate. To replace a tube in an existing luminaire, keep the same diameter: the sockets are not interchangeable.
Is it possible to replace a neon with an LED neon?
Yes, a fluorescent tube can be replaced by an LED tube of the same length and the same cap, provided you check the luminaire's ballast. Some LED tubes work with the existing ballast, others require direct wiring and removal of the ballast. The mention appears on the tube's packaging.
Changing a neon tube with built-in ballast: how to recognise the setup
Open the luminaire with the power off and locate the block housed in the fixture: a magnetic ballast is a heavy box, often with a visible starter. An electronic ballast is flatter and the luminaire has no starter. This observation is enough to know which type of LED tube to order, without an approximate neon LED tube wiring diagram found online.
Wiring an LED neon tube: the checks before powering up
Check three points in order: the compatibility stated on the packaging, the presence or absence of a starter to remove, and the mounting direction when indicated. An LED tube that requires direct wiring will not be powered correctly on an original setup. If you are not sure about the setup, have the luminaire installed: it is the only way to keep the installation reliable. For a worktop, also compare with tubes for kitchen worktops, often supplied with their batten.
How to know if a neon tube works and where the fault comes from?
A tube that stays off, flickers or only lights at the ends signals a problem with the tube, the starter or the ballast. Start by replacing the tube with a known new tube, then the starter. If nothing changes, the ballast or the socket contacts are the cause.
- Nothing lights up: tube at end of life or power cut. Replace with a known new tube.
- Flickering on start-up: tired starter. Change the starter before the tube.
- Ends glowing red without starting: starter or tube out of order.
- New tube that does not start: ballast or oxidised socket. Check the contacts.
- Weak and flickering light: worn tube or dirty pins.
How to know if a neon starter is dead?
A tired starter shows as repeated flickering, a slow start or glowing ends without a clear light. Swapping it for a new starter of the same type settles the question: if the tube lights immediately, the starter was the cause. This small cylinder costs little and is changed without tools.
Where is the starter in a neon?
It is never in the tube, but in the luminaire: a small cylinder housed in the fixture or in the block, accessible by removing the diffuser or the grille. Battens with an electronic ballast and LED tubes do not have one. This absence explains why some luminaires start instantly. For a complete replacement, our full range of luminaires can be browsed by mounting type.
Which 30cm neon tube for a bathroom, a kitchen or a garage?
In a bathroom and a kitchen, priority goes to the ingress protection rating against moisture and splashes, then to the light colour. In a garage or a workshop, you look for a neutral light and a tube well protected against dust. The room decides the housing before deciding the tube.
| Room or use | Format to favour | Light colour | Point to watch |
|---|---|---|---|
| Kitchen worktop | Slim T5, under-cabinet | Neutral to cool white | Ingress protection and light without cast shadow |
| Bathroom | Tube in closed housing | Neutral white | Moisture and splashes |
| Garage, workshop | T8 or batten in closed housing | Cool white | Dust, impacts, mounting height |
| Wall light and mirror | Slim tube behind glass | Warm white | Glass diffusion and alignment with the mirror |
| Cabinet, cupboard, display case | Small 30cm tube | Neutral white | Usable length and fixture position |
| Sheltered outdoor | Waterproof tube | Cool white | Housing sealing |
Bathroom neon: ingress protection before colour
In a damp room, the ingress protection rating is read on the luminaire's data sheet and on the housing label. The higher it is, the better the fixture resists splashes. The light colour comes after: a neutral white renders skin tones accurately in front of a mirror, a too-cool white hardens the features. Find the suitable models in bathroom lighting.
Neon LED for garage: neutral light and closed housing
In a garage, the light must carry far and stay stable when working under the bonnet or at the bench. A cool or neutral white makes details readable; a closed housing limits the soiling of tubes. For a sheltered outdoor installation, look instead at tubes designed for outdoor use, whose sealing is stated.
How to match a 30cm tube with a wall light, a pendant or a spotlight?
A 30cm tube pairs with luminaires of the same family: glass wall light, pendant, spotlight or tube floor lamp. Keep the same metal colour and the same shade of white from one room to another. Better one family well declined than three styles that contradict each other.
Glass tube wall light: matching glass and metal
Frosted glass softens the light and hides the tube; clear glass reveals the luminous line and gives a more graphic result. Check the opening of the glass for changing the tube: a too-closed model complicates maintenance. Tube wall lights use the same tube length as your housing, which keeps a coherent line on a wall.
Pendant, spotlight or tube floor lamp: keeping the same family
Above a table, a tube pendant extends the horizontal line of a worktop. For targeted lighting, turn to tube spotlights, and to the black tube spotlight if the room plays on dark contrasts. In a living room, tube floor lamps bring the same family of light without drilling the wall.
How to install and maintain a 30cm neon tube?
Switch off the power before any handling, let the tube cool, then rotate it a quarter turn to release it from its sockets. When refitting, the pins align and the tube locks. A dry cloth is enough for maintenance, never any product on the pins.
Fixing the fixture: alignment and clearance around the tube
A fixture mounted crooked shows as soon as the tube is on: draw the line before drilling, check with a level, and keep a clearance on each side to rotate the tube without forcing. Under a cabinet, set the batten back from the edge to avoid direct glare. For a kitchen cabinet, well-aligned kitchen under-cabinet lighting is better than a more powerful model badly positioned.
Cleaning a tube without damaging the pins
Unplug, let cool, then wipe the tube with a dry or slightly damp cloth. Do not send any liquid onto the sockets or the pins: contact oxidation is the first cause of a false contact on an old luminaire. Once a year is enough in a living room, more often in a dusty workshop.
To choose with confidence, rely on the model's data sheet: length, diameter, cap and ingress protection are listed there. Payment is secure, delivery tracked, returns provided for and the Designix customer service answers technical questions before ordering. The LED tube collection lets you compare formats and leave with the tube suited to your fixture.
Frequently asked questions
Can a neon work without a starter?
A fluorescent tube mounted on a magnetic ballast needs a starter to start. With an electronic ballast, starting happens without a starter. An LED tube does not use one: some models even require removing the starter and redoing the wiring.
What should I do if my neon tube no longer lights up?
Switch off the power, replace the tube with an identical new model, then test the starter if there is one. If the luminaire stays silent, check the sockets and the ballast. A new tube that does not start points to the ballast or the wiring.
Does a 30cm LED tube replace a fluorescent tube of the same length?
Yes if the length, diameter and cap match, and if the setup is compatible. An LED tube may work with the existing ballast or require direct wiring. Length alone is therefore not enough: the instructions on the packaging settle it.
How to change a neon tube with built-in ballast?
Switch off the power and let cool. The tube is released by rotating it a quarter turn in its sockets. If the luminaire has a built-in ballast, note its technology before choosing the replacement LED tube: some are wired directly, others accept the ballast in place.
How to choose a wall light with a glass tube?
First look at the length of the tube it holds, then the wall fixing and the opening of the glass for changing the tube. Frosted glass softens the light, clear glass makes it sharper. The ingress protection rating matters if the wall light goes in a bathroom.





