12V waterproof LED strips
This selection is also available in our French store: Rubans LED étanches 12V
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A 12V waterproof LED strip installs where a standard light fitting cannot go: under a boat's swim platform, along a van's running board, in a bathroom, on a covered terrace. The low voltage removes the risk on contact and the coating blocks moisture, provided you also protect the connections and provide a 12V transformer.
What is a 12V waterproof LED strip and what does low voltage change?
A 12V waterproof LED strip is a flexible band of LEDs, powered at low voltage, protected by a coating against moisture and splashes. 12V is not a fad: it is the onboard voltage of vehicles and a level that is safe to touch. This constraint requires a transformer or driver that steps down the 230 V mains supply to 12 V.
12V low voltage: what it changes for installation
The strip can be installed without contact safety precautions, which opens up wet areas and vehicles, but moves the tricky point to the power supply. The driver remains a device to be plugged into the mains: it must be ventilated, accessible for servicing and placed away from water. Voltage drop also comes into play, more noticeable at 12V than at mains voltage, which shifts the trade-off towards switching to 24 volts for long runs when the route gets longer.
Ruban or bande LED: is it the same thing?
Both words refer to the same product: a flexible circuit board carrying SMD LEDs, cuttable in groups. The term bande emphasises the flat, continuous shape, the term ruban the flexibility of the backing. Choose a silicone coating if you want a smooth surface that is easy to clean, a polyurethane sheath if the strip must withstand rubbing. To compare the variants, see the full range of LED strips and all our waterproof LED strips.
Where to install a 12V waterproof LED strip: outdoors, boat, van or car?
12V waterproof is suitable for wet rooms and vehicles: bathroom, covered terrace, boat swim platform, van ceiling, car boot, motorcycle fairings. Avoid immersion unless rated IP68, and protect the connectors, the weak point of any outdoor installation.
12V waterproof outdoor LED strip
On a covered terrace or under a canopy, the strip highlights a step, a pergola or the edge of a bar without glare. Indirect light tucked under a piece of furniture is easier on the eyes than a spotlight facing you. Technically, water always runs down through the connection: sheath every junction, point the plugs downwards and avoid junctions that form a bowl. For a pond, turn to pond and pool lighting, which requires immersion protection.
12V waterproof LED strip for boats
On a boat, the low voltage matches the onboard supply and condensation is constant. A strip fitted under the foredeck or in the cockpit lights the deck without switching on the mast spotlight, which preserves night vision. Fix the strip to a rigid support rather than directly to the deck, and protect the connections with heat-shrink tubing or a sleeve, as they are the first to fail with spray and vibration.
12V waterproof LED strip for cars and motorcycles
In a boot, under a running board or along a motorcycle fairing, the waterproof strip lights the useful area and goes unnoticed whether on or off. The real constraint is mechanical: rubbing, vibration, washing jets. Choose a sheathed strip, a connection to a fused circuit, and bear in mind that decorative lighting does not replace an approved signalling light. A flexible, discreet model is often chosen for ambient strips for the living room as much as for a vehicle interior.
Which IP rating to choose for a waterproof LED strip?
The IP rating is read in two digits: the first concerns dust, the second water. IP20 does not protect against moisture, IP44 withstands splashes, IP65 jets, IP68 prolonged immersion. A strip installed outdoors or in a bathroom must display at least IP65.
IP65 or IP68: which to choose?
IP65 covers water jets and rain, so a terrace, a shelter, a cockpit, a van ceiling. IP68 adds immersion, which concerns a pond, a fountain or a submerged fitting. In all cases, the strip's protection covers neither the connector nor the driver: an IP68 strip connected with a bare splice loses its waterproofing in the first storm. So count the strip, the connections and the power supply as three elements to protect separately.
Is IP44 enough in a bathroom?
In a wet room, IP44 is suitable outside the shower zone, for a strip fitted under a vanity unit or behind a mirror. Near the bathtub or exposed to direct splashes, go up a level. The right reflex is to check the manufacturer's installation instructions for the permitted zone. To broaden the field, compare with waterproof LED strip for outdoor use before deciding.
| Rating | Actual protection | Where to install it | Watch out for |
|---|---|---|---|
| IP20 | no protection against water | dry interior, furniture, ceiling | avoid in wet rooms |
| IP44 | water splashes | bathroom outside the shower zone | no direct jets |
| IP65 | water jets | terrace, shelter, van, boat | also protect the connectors |
| IP68 | prolonged immersion | pond, fountain, pool | check the permitted depth |
12V, 24V or 220V LED strip: how to decide?
12V is the most common voltage for vehicles and short lengths. 24V limits voltage drop and allows longer runs with the same cable gauge. 220V plugs directly into the mains, without a transformer, but is reserved for long lengths and fixed installation.
12V waterproof 24V LED strip 12 metres: how far can you go?
Doubling the voltage halves the current at equal power, and therefore the loss in the cable. That is why long continuous runs switch to 24V: the end keeps the same intensity as the start, without progressive yellowing. On a very long 12V run, you instead re-power the strip by tapping the driver in the middle of the route. Choosing the cable matters as much as choosing the strip: undersized, it heats up and dims the light.
220V waterproof LED strip or 12V with a transformer?
220V avoids the driver and suits a cornice or a facade in fixed installation, with more demanding installation safety since you are handling mains voltage. 12V remains more flexible for a removable or mobile setup. Compare 220V strips without a transformer and flexible cuttable LED strips depending on whether the installation is fixed or not.
| Criterion | 12V strip | 24V strip | 220V strip |
|---|---|---|---|
| Power supply | 12V transformer or driver required | 24V driver required | direct connection to the mains |
| Voltage drop | noticeable over long lengths | less noticeable, longer runs | low, long runs possible |
| Cable gauge | larger at equal power | smaller at equal power | no low-voltage cable |
| Typical uses | van, boat, car, motorcycle, small rooms | large rooms, ceilings, continuous runs | cornices, facades, fixed installation |
| Safety on contact | low voltage | low voltage | mains voltage, careful installation required |
Red, blue, RGB or warm white LED strip: which light colour?
Warm white 2700 K gives a light close to the filament bulb, 3000 K stays warm but crisper, 4000 K leans towards neutral white. RGB versions combine several colours, RGBW adds a dedicated white to light without going through a mix.
12V waterproof red LED strip
Red highlights a line, a running board or a platform without lighting the area: useful where you want to see without losing night vision, on a boat or in a van. The result remains decorative, it does not replace working lighting. Red tires the eyes quickly if used as the main light in a living room.
12V waterproof blue LED strip
Blue creates a cool atmosphere, often chosen for a pond edge or a decorative niche. Its short wavelength lights surfaces poorly, which makes it an accent rather than a useful source. Check that the shade is truly monochrome and not an RGB set to blue, as the result differs.
RGB or RGBW: what difference for a living room?
An RGB strip mixes three colours to recreate white, with an often greenish result. RGBW adds a dedicated white LED: you keep clean white for reading or dining, and colour for atmosphere. In a living room, this versatility avoids installing two strips. To choose a fixed shade rather than animation, see warm white 3000 K or very warm light at 2700 K, and for colour, compare multicolour RGB strips and RGBW models with dedicated white.
| Temperature | Result | Recommended room | Good to know |
|---|---|---|---|
| 2700 K | very warm white, amber tint | living room, bedroom, reading corner | softer, less crisp result |
| 3000 K | warm white | kitchen, dining room, living room | the most common indoors |
| 4000 K | neutral white | workshop, garage, worktop | cooler, less enveloping |
| RGB / RGBW | colours, plus a dedicated white in RGBW | atmosphere, terrace, headboard | requires a controller or remote control |
Cuttable LED strip: how does it work?
A cuttable strip has cut marks every few LEDs, generally in groups of three. You only cut on these marks, never between two LEDs. Then you re-power the section or tap the supply so that the next section keeps the same intensity.
Where to cut an LED strip without damaging it?
The marks form small lines or a pair of copper pads between two groups of LEDs. Cutting in the middle of a group switches off part of the strip and leaves the circuit open. Locate the mark before measuring, never after.
What to do with the rest of the strip?
The separated section can be reused if it is re-powered: you need to bring 12V to the designated pads, with a waterproof connector, a clamp connector or a solder joint protected by a sheath. A leftover strip without power does not light up through contact with the working part. For sections to be continued over large rooms, look at switching to 24 volts for long runs and our waterproof LED strips.
How to install and maintain a 12V waterproof LED strip?
Clean and degrease the surface before sticking, add an aluminium profile to dissipate heat and protect the connections with a sheath or sleeve. Maintenance is limited to a damp cloth, without solvent, and a check of exposed connectors once a year.
How to fix an LED strip to a damp surface?
On a cold, greasy or porous surface, the original adhesive holds poorly. Degrease with alcohol, let it dry, then fit an aluminium profile or a plastic rail and stick the strip to it. The profile serves twice: it presses the strip flat and dissipates heat, which prevents the LEDs from ageing too quickly. Finish with a dab of glue at the ends and a cable gland for the exit.
Cleaning an outdoor LED strip without damaging it
A damp cloth is enough, without solvent or pressure washer, which would force water into the junctions. Check the condition of the sheaths once a year and tighten the connections. To go further on the power supply, see our lighting catalogue and its accessories.
Where can I find a waterproof LED lighting strip?
12V waterproof LED strips are available in DIY stores, from a lighting specialist or online. The sorting criterion remains the IP rating, the voltage and the white colour: this is what distinguishes a strip genuinely intended for outdoor use from an indoor strip simply sold with a housing.
12V waterproof LED strip in store or online?
A store lets you touch the coating and check the thickness of the sheath. Online, read the technical data sheet rather than the listing title: IP, voltage, LED type, white temperature. For a specific project, start from the full range of LED strips and all our lighting collections, then refine by use.
How to check waterproofing before buying?
Look for the IP rating stated in black and white, the mention of the coating (silicone, sheath) and the presence of a waterproof connector in the kit. A strip advertised as outdoor without a clear IP offers no guarantee. Also check that the driver is intended for the location, as a bare power supply does not withstand water. Find the suitable models in waterproof LED strip for outdoor use and, for indoor decorative use, living room lighting ideas.
The choice comes down to three facts that are easy to check before ordering: an IP rating of at least IP65 for outdoor use, a voltage suited to your power supply, and a white colour set according to the room. Once these criteria are set, the rest (length, connections, profile) is sorted out at installation. Browse all our waterproof LED strips and all our light fittings to find the strip that suits you.
Secure payment, tracked delivery, returns and Designix customer service: you order with peace of mind and can ask your technical questions before connecting.
Frequently asked questions
Where can I find a waterproof LED lighting strip?
In DIY stores, from a lighting specialist or online. In all cases, sort by three facts printed on the packaging: the IP rating, the supply voltage and the white colour. A strip sold without a clear IP rating is not an outdoor strip.
Which LED strip should I choose for outdoor use?
A strip with an IP rating of at least IP65, powered at low voltage 12V or 24V for safety, and whose connections are protected as much as the strip itself. Avoid immersion unless rated IP68. The colour is then chosen according to the atmosphere you want on the terrace.
Cuttable LED strip: how does it work?
The strip has spaced cut marks corresponding to groups of LEDs. You only cut on these marks, never in the middle of a group, then re-power the separated section with a suitable connector. Cutting elsewhere damages the circuit and switches off part of the strip.
Can a 12V waterproof LED strip be installed on a boat or in a van?
Yes, the 12V low voltage matches the onboard supply, and the waterproof strip withstands condensation and splashes. The fixing must be done carefully to absorb vibration and each connection must be protected. The onboard converter must deliver a stable voltage, without surges.
Do I need a transformer for a 12V waterproof LED strip?
Yes, a 12V strip is never connected directly to the mains: you need a transformer or driver that steps down the voltage. This unit must remain accessible, ventilated and protected from water. A strip designed for 230V does without it, but requires a fixed, careful installation.





