12V LED lighting

This selection is also available in our French store: Luminaires LED 12V

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
12V LED lighting
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

First check three details on a light fixture's spec sheet: the voltage (12 V), the socket or module, and the protection rating. This trio decides whether the fixture can go in a camper van, a bathroom or by a pool, well before style. For dimming, check that the driver and the 12V LED lights bulb are dimmable: an unsuitable dimmer can cause flickering. Outdoors, a connectable 12V lighting system lets you link several points on a single driver, taking cable length into account.

What is a 12V LED light fixture and when should you choose one?

A 12V LED light fixture runs on low voltage through a transformer or driver that steps down the 230 V mains supply. You choose one when the light point is in a wet area, a camper van or outdoors. LED runs cool and uses little power, provided you respect the voltage stamped on the socket.

12V LED bulb: which socket should you choose?

The socket belongs to the fixture, not the bulb: you replace it like for like. A G4 fits miniature spotlights and compact wall lights, a GU5.3 fits adjustable recessed spotlights, an E14 or E27 in 12 V version fits camper van ceiling lights. Note the reference before dismantling, then compare with the recessed ceiling lights if you are replacing the whole unit.

12V low voltage or 230V: what is the difference day to day?

12 V travels short distances and handles wet rooms with fewer insulation constraints. 230 V connects directly to the mains and remains the standard for homes. Watch out for voltage drop on long 12 V runs: a cable that is too thin dims the light at the end of the run, and the point furthest from the driver lights less than the first. Place the transformer as close as possible to the light points.

Where to install a 12V LED light fixture indoors and outdoors?

Indoors, 12 V makes sense in the bathroom, the WC, under a kitchen shelf or outside near a pool. In camper vans and vans, it is the standard. The decisive point remains the protection rating: the wetter the room, the higher it must be.

Which 12V LED light fixture depending on room and use
Room or use Type of fixture Point to check Recommended light
Camper van, van Ceiling light or recessed 12V spotlight Voltage, socket, dimensions Warm white
Bathroom Wall light or ceiling light for wet rooms IP protection rating Neutral to warm white
Pool, terrace Recessed projector or floor-standing fixture IP rating and 12V supply Neutral white
Living room Chandelier, pendant or ceiling light Ceiling height, diameter Warm white
Kitchen Strip light or under-cabinet spotlights Cable length, driver Neutral white
WC Compact ceiling light Format and protection rating Warm white

For bathrooms, a discreet wall light is often enough: see the WC lights and the IP44 bathroom light range. Outdoors, look at pool lighting or floor-standing bollards and lamps, checking each time that the spec sheet mentions 12 V.

Always install the driver in an accessible, ventilated space, never buried in insulation. A transformer that heats up enclosed under glass wool fails without warning, and the symptom looks like a blown bulb.

Which 12V LED ceiling light should you choose and what power do you need?

For a 12V LED ceiling light, first look at the area to be lit, then the stated luminous flux and the colour temperature. A neutral white model suits a work room, a warm white one a dining corner. Power alone tells you nothing: what counts is the luminous flux, expressed in lumens.

Powerful 12V LED ceiling light or modern 12V LED ceiling light: the lumens criterion

A powerful LED ceiling light is not necessarily the biggest: the quality of the diffuser changes everything. Opal glass spreads the light and avoids glare above a table, whereas a bare shade casts hard shadows. Compare spec sheets at equal surface area, and trust the flux rather than the power label. In a small space, two soft sources are better than one very strong one: the same is true for living room LED lights.

Warm white or neutral white: which colour temperature?

Around 2700 to 3000 K, warm white creates an evening mood and suits bedrooms and dining corners. Around 4000 K, neutral white renders colours more accurately and stays comfortable for reading or cooking. Beyond that, the light turns blue and is tiring in domestic use: keep it for the garage or the utility room.

12V LED bulb: which socket for which fixture?

The socket depends on the fixture, not the bulb: G4 for miniature spotlights and some wall lights, GU5.3 for recessed spotlights, E14 or E27 in 12V version for camper van ceiling lights. Always check the voltage and the type of current, alternating or direct, before ordering.

12V LED sockets and modules: uses and checkpoints
Socket or format Type of fixture Typical use To check
G4 Miniature spotlight, compact wall light Camper van, niche, display case Alternating or direct current
GU5.3 Adjustable recessed spotlight Ceiling, worktop Presence of a transformer
E14 and E27 12V Ceiling light, wall light Camper van, utility room Voltage stamped on the socket
LED strip Linear lighting Under-cabinet, skirting, niche Driver power
Integrated LED module Slim ceiling light Small room Replacing the module, not the bulb

An identical socket guarantees nothing: an E27 socket can take 230 V as well as 12 V, and getting it wrong puts the bulb out of service immediately. Read the label stuck on the fixture or on the driver, not just the box. Miniature G4 formats and low-power 12 V bulbs are mainly used in niches, display cases and vehicles.

On a camper van or car circuit, check the polarity and the type of current before connecting. For the general mood of a living room, a characterful model is still possible: browse the original lights and the pendants and hanging chandeliers, checking the voltage on the spec sheet.

How do you connect a 12V LED strip without a connector?

Without a connector, a 12V LED strip is connected by soldering onto the copper pads, or with a lever connector if the strip remains accessible. Respect the polarity, insulate the joint and check the driver power before connecting. A poorly tightened contact causes flickering and overheating.

For soldering, first tin the pads, then the wires, and let them cool before sticking: excessive heat lifts the copper strip from its backing. With a connector, strip a few millimetres, tighten firmly and pull gently to test the hold. Heat-shrink tubing over the joint protects against moisture, especially under a kitchen worktop. For long runs, feed the strip from both ends to avoid a drop in brightness at the end of the strip.

On the driver side, add up the consumption of all connected strips and keep a margin: a unit running at maximum capacity heats up and ages badly. A design model for the kitchen under a cabinet pairs well with a continuous strip light, provided the cable length is planned from the start.

LED chandelier and powerful LED wall light: how do you light a living room in 12V?

A living room LED chandelier is chosen according to ceiling height and table size, with a diameter consistent with the room. A powerful LED wall light lights a hallway or entrance without taking up floor space. In 12V, check that the fixture is actually designed for that voltage.

Above a table, generally allow a chandelier diameter of about one third of the tabletop width, and the bottom of the fixture 75 or 80 cm above the tabletop so it does not block guests' sightlines. In a hallway, a wall light 1.80 m from the floor lights faces rather than feet. 12 V remains rare on chandeliers: most are designed for 230 V, with an integrated driver. If your circuit is low voltage, go for a model explicitly rated 12 V, or keep 12 V for spotlights and wall lights and leave the chandelier on the mains. For the mood, compare the modern dining room lights, the most dressed-up pieces and the design selection for the living room, keeping copper and smoked glass to warm up a pale interior.

A powerful 12 V LED wall light is recognised by the voltage stated on its spec sheet, its luminous flux and its protection rating. Not all wall lights come in low voltage: the 12 V mention must be there in black and white before ordering.

How do you change a recessed LED ceiling spotlight?

Switch off the power at the breaker, remove the spotlight ring, unplug the connector and locate the transformer. Note the voltage and the socket before buying a replacement. A 12V LED spotlight is replaced with a model of the same voltage and the same format; if the driver is integrated, the whole unit is replaced.

12V or 230V LED spotlight: recognising the transformer

A white or grey box housed above the ceiling, with two low-voltage wires running to the spotlight, indicates a transformer. In some installations, a single unit feeds several spotlights: in that case, replace the driver before concluding that the modules are dead. Measure the cut-out diameter and the available depth, as these are the two dimensions that block a replacement. Compare with the recessed spotlights in the collection.

Changing a recessed LED spotlight without damaging the ceiling

Slide a flat blade under the ring without forcing, and work on one side at a time. The fixing springs fold upwards; removing it at an angle tears the plaster around the cut-out. If the ceiling is painted plasterboard, slip a thin piece of card between the tool and the surface. Reconnect the connector before pushing the spotlight back, then test before clipping the ring back: nothing is more annoying than having to take it apart again.

On a kitchen or bathroom ceiling, take the opportunity to check the protection rating of the old model. A modern kitchen light is chosen with a rating consistent with the room, especially above the sink.

Lyon lighting clearance sale: how do you buy your 12V without getting it wrong?

Clearance sales let you find end-of-line or display models, sometimes one-off pieces. Before buying, check the voltage, the socket, the protection rating and whether the driver is included. In Lyon, a shop shows you the actual light; online, rely on the detailed technical specifications.

Lighting shop in Lyon or online purchase: what changes for a 12V model

In a shop, you judge the real tint and the dimensions. Online, you have the full spec sheet, the socket type and the voltage, three details rarely displayed on the shelf for low voltage. Few stores display 12 V models: note the reference in the shop, check the voltage and socket on the spec sheet, then compare. The Designix lighting catalogue groups the families by room and by style.

Lighting clearance sale: the checks before you commit

A display model may have been dismantled: ask for the technical sheet and check that the driver is included. Check for mounting marks on the fixings and that the instructions are present. A one-off piece is judged on these concrete points, not on the discount shown. A search for Lyon lighting clearance sale often turns up end-of-line 230 V models: for 12 V, the spec sheet remains your only reliable guide.

To get a sense of the styles before you travel, browse the contemporary outdoor lights, the rechargeable lights and the full lighting collection. The beige models and the copper pieces give an idea of the available finishes.

A question about a 12V LED light fixture?

Which 12V LED bulb should you choose for a camper van?

Take a bulb with the same socket as the original bulb, often G4 or E27 depending on the fixture, and check whether the circuit is direct current. Warm white suits the cabin, neutral white the van's kitchen. Keep the original power as a format reference: it guarantees that the module fits the socket.

Which 12V LED ceiling light should you choose for a wet room?

Look for a ceiling light whose protection rating matches the room, with warm white light for comfort. Dimensions matter as much as the look: measure the space before choosing a compact model. An opal diffuser avoids reflections on a tiled wall.

How do you recognise a powerful LED wall light compatible with 12V?

The 12 V mention must appear on the product sheet, alongside the luminous flux and the protection rating. A wall light designed for 230 V cannot be converted: you need a low-voltage model or a suitable driver. If in doubt, ask Designix customer service for the exact reference.

Can a living room LED chandelier work on 12V?

Only if the manufacturer provides for it, with a suitable driver. Most chandeliers are designed for 230 V. For a low-voltage living room, go for a model explicitly rated 12 V, or keep 12 V for spotlights and wall lights and leave the chandelier on the mains. The modern living room lights give size references.

Where can you find a lighting shop in Lyon to see the models?

A shop lets you compare the actual light, the real size and the finish. For a 12 V model, few stores display low voltage: note the reference, check the voltage and socket on the spec sheet, then compare with the online offering. The lighting catalogue remains the reference for cross-checking information.

Ordering a 12V LED light fixture from Designix

Secure payment, tracked delivery, returns and Designix customer service: the four points that matter when ordering a low-voltage model without having seen it lit. Before confirming, re-read the voltage, the socket and the protection rating on the spec sheet: these are the three details that prevent a return. To compare families and moods, the lighting selection brings together all the pieces.

Our advice for choosing
This selection brings together 12 volt low voltage LED light fittings: ceiling lights, spotlights, wall lights and strips, for a motorhome, a bathroom or an outdoor area. The choice depends on the base, the protection rating and the colour temperature.