12V lighting

This selection is also available in our French store: Luminaires 12V

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
12V lighting
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

A 12 volt lighting fixture runs on low voltage: it is powered by a transformer connected to the mains, or directly by the battery of a camper van, caravan or boat. It is chosen to light places where 230 V does not reach, with an LED that gives off little heat and draws little from a battery.

For lighting on 12V tensioned cables, plan fixings suited to the surface, sufficient cable voltage and check the permissible load before installing the fixtures.

The principle stays simple: low voltage does not change the way light illuminates a room, it changes the way it is powered and cabled. That is the point that decides which model to install in a vehicle, a bathroom or a garden.

12V LED lighting: what low voltage really changes

A 12V LED gives the same light as a mains LED at equal intensity. The difference comes down to three concrete points: the heat given off stays low, consumption weighs little on a battery, and the electrical risk is lower in damp environments. On the other hand, cable length becomes a criterion, which we return to below. To compare the shapes and materials available, browse all our lighting fixtures.

Do you need a transformer for a 12V lighting fixture?

A transformer is only needed if only a 230 V supply is available: it then steps the voltage down, and a suitable driver does the same job for an LED. On a battery, in a camper van or on a boat, no transformer is required. If you are looking to do away with wiring, the rechargeable models without cable avoid the power supply question.

Which 12V ceiling light should you choose for a camper van or caravan?

In a camper van or caravan, the 12V ceiling light is chosen on three points: the installation voltage, 12 V DC on battery, the footprint on the ceiling and the switching method. A flat LED model with built-in switch avoids running a cable to the panel.

12V ceiling light for a camper van

The cabin is cramped and the ceiling low: a flat ceiling light, with a diffuser that does not throw light back into your eyes, makes the space feel larger than a single point source. Plan for warm light in the evening and, if the sleeping area also serves as a reading corner, a second, more directed point. A mains bulb in a 12 V socket will never light up: check the voltage first of all. For low-height nooks, see the recessed spotlights for a low ceiling.

12V ceiling light with switch: why it is more practical

The built-in switch removes a cable and a cut-out in a caravan partition. It also handles night-time switching without getting out of bed. Check that it stays accessible once the fixture is fitted, and be wary of a transformer that hums: in an on-board installation, a quality model is less audible.

Room or use Type of fixture Protection rating to aim for Point to check
Camper van or caravan Flat 12V ceiling light with switch IP20 in the cabin Battery DC voltage and thickness
Bathroom Wall light or mirror ceiling light IP44 minimum Position clear of shower spray
Kitchen Strip light or under-cabinet spotlight IP20 outside the cooking zone Accessible and ventilated transformer
Living room, dining room 12V pendant or chandelier IP20 Clear height above the table and weight
Terrace Floodlight or wall light IP65 Protected connections and suitable screws
Poolside Bollard or floodlight Rating higher than IP65 Immersion never assumed without mention on the data sheet

Which 12V lighting fixture should you install in a bathroom or toilet?

In a bathroom, a 12V lighting fixture must show a protection rating suited to humidity, with IP44 being the usual minimum above a washbasin. In the toilet, a small ceiling light or wall light is enough, with instant switching and neutral light on hands and mirror.

12V bathroom lighting: the protection rating decides

Deal with humidity before aesthetics. IP44 protects against water spray and suits a mirror wall light; above a bathtub or very close to the shower, aim higher and keep the fixture away from direct spray. Low voltage reduces the risk, it does not make an open fixture waterproof. Our wall lights and ceiling lights for damp rooms are classified on this criterion.

Toilet lighting: small space, crisp light

A small volume copes poorly with diffuse light coming from all sides: better a source directed at the floor and the washbasin, with instant switching. Neutral light, around 4000 K, makes the room look clean without artificially enlarging it. Find the lighting for small rooms suited to this format.

How do you light a kitchen in 12V?

In the kitchen, 12V mainly serves the worktop: strip lights and under-cabinet spotlights, powered by a shared transformer. Aim for neutral light to read textures and a warm tone for the meal, without multiplying light points overhead.

Kitchen lighting: worktop and under-cabinet

Two layers are enough: general light on the ceiling, then task light under the wall units. Several small, well-spread points are better than a single very strong source that casts the shadow of your hands on the chopping board. House the transformer in an accessible, ventilated place, never in the cooking zone. See the models for worktop light.

12V LED lighting: which colour temperature in the kitchen?

Around 4000 K for peeling and cooking, warmer, around 2700 to 3000 K, for the table and the meal. The same worktop can take both: neutral strip light on the prep side, warm pendant above the island. The designer kitchen strip lights and spotlights are chosen on this consistency.

12V chandelier, pendant or original fixture: which style for a living room?

A 12V chandelier or low-voltage pendant is chosen first on the clear height left above the table, then on style. In a living room, the pendant drops into the field of view without getting in the way of movement, and the fixture must stay in proportion to the surface it hangs over.

12V chandelier: what to check before installing it

Three checks before drilling: the weight at the fixing point, the drop height above the floor and the presence of a 12 V supply nearby. A large volume calls for a piece that fills the space, a room with a low ceiling copes poorly with a long drop. Compare the pendants that drop into the room before deciding.

Vintage and original decorative lighting: 12V exists too

Low voltage does not mean a technical ceiling light. Elaborate shapes exist in 12 V, including warm finishes and materials that catch the light differently. If the room is meant to stand out, start from the original fixtures and their unique shapes; for a living space to light every day, look instead at the designer pieces for the living room and their LED living room lighting.

Trending lighting reviews: how to read reviews without getting it wrong

A useful review describes a real use: ease of fitting, the finish seen up close, the quality of light on the wall. The overall rating alone says nothing about compatibility. Always cross-check with the data sheet: voltage, socket, protection rating. These three pieces of information do not change, impressions vary.

Which bulb and transformer should you plan for a 12V lighting fixture?

A 12V lighting fixture runs on an LED bulb designed for that voltage, with a G4 or GU5.3 socket depending on the model, powered by a transformer or a driver. The transformer power must cover the sum of the connected bulbs, with a margin to avoid flickering and overheating.

12V LED bulb: socket, voltage and colour temperature

The base must match the socket, with no improvisation: a G4 does not fit a GU5.3. Then the voltage: a bulb designed for the mains stays dark on low voltage. Finally the colour temperature, chosen per room. The rest of the lighting catalogue follows the same checking logic.

Voltage drop: why cable length matters

Over a long distance between transformer and fixture, the voltage falls at the end of the line and the light dims. Shorten the cable, increase the cross-section, or move the power supply closer. A driver compatible with the dimmer also avoids flicker at low intensity.

Criterion What to check Why it matters
Socket G4 or GU5.3 depending on the socket A different base makes the bulb unusable
Voltage Bulb designed for 12 V, not for the mains A mains bulb does not light on low voltage
Current type DC on battery, AC on transformer DC avoids flicker on battery
Transformer power Sum of the bulbs plus a margin Undersized, it makes the LEDs flicker
Cable length Cross-section and distance to the fixture Too much length dims the light
Dimming Driver compatible with the dimmer Without compatibility, the LED flickers

Can you install a 12V lighting fixture outdoors, near a pool or on a terrace?

Yes, provided you choose a 12V lighting fixture whose protection rating matches the exposure: IP65 for a terrace battered by rain, a higher rating near a pool. Low voltage reduces the electrical risk, it never replaces the sealing of the equipment or the care taken with connections.

Outdoor pool lighting: what IP means

IP65 means protected against dust and water jets, not submersible. A fixture intended to go underwater says so explicitly on its data sheet; without that mention, fit it outside the pool, as a wall light or bollard. Near a diving board, also plan a clear passage area. See the lighting for poolside areas.

Lighting a terrace or path on low voltage

To mark out a path, a bollard or a low post light avoids glare and guides the step without lighting the sky. On a covered terrace, a wall light is enough; on an exposed facade, the rating goes up. Clean the seals and screws once a year, and remove dead leaves from the bowls. Compare the bollards and post lights and the contemporary outdoor lighting.

Where to find 12V lighting, between a shop in Lyon and clearance stock?

A lighting shop in Lyon lets you see the material and the real colour, while a lighting clearance sale in Lyon mainly concerns end-of-line stock. For 12V, it is better to check the voltage, socket and protection rating on the data sheet than to trust the look on the shelf.

Lighting shop Lyon: what to judge in a showroom

In the showroom, you judge the real tint of smoked glass, the weight of brass, the footprint of a pendant in a volume. You do not judge the compatibility of a socket or the durability of a seal. Ask for the data sheet and note the socket and rating before travelling, as availability varies from one store to another.

Lighting clearance Lyon: end-of-line and display models

A lighting clearance sale in Lyon gathers end-of-line stock, display models or opened packaging. Check the condition of the fixings, the presence of the instructions and the fitting hardware, and refuse a fixture whose 12 V reference is not legible. For character pieces, look instead at the exceptional models for large volumes or a piece above the table.

At Designix, secure payment, tracked delivery, returns and customer service support you from choice to installation. Unsure about a socket or a protection rating? Write to us before ordering: that is when a detail prevents a return.

See the available lighting fixtures

Frequently asked questions about 12V lighting

Which 12V lighting fixtures should you choose for a camper van?

A 12V lighting fixture for a camper van is powered by the vehicle battery, at 12 V DC. Favour a flat LED ceiling light, with built-in switch, and a diffuser that avoids glare at night. Check the voltage and socket before ordering.

12V ceiling light with switch: is it more practical?

A 12V ceiling light with switch avoids running a cable to a wall switch, which matters in a camper van, a caravan or a small pantry. The switch is built into the fixture, so you switch on the spot. Check that it stays accessible once the ceiling light is fitted.

Which 12V lighting fixture for a bathroom?

In a bathroom, choose a 12V lighting fixture whose protection rating suits humidity, with IP44 being the usual minimum above a washbasin. Place it clear of direct shower spray and prefer a diffuser that softens the light on the mirror.

Can you put a 12V chandelier in a living room?

Yes. A 12V chandelier connects to a transformer or a low-voltage source. In a living room, check the clear height under the fixture, the weight at the fixing point and the available cable length before drilling the ceiling.

Is trending lighting reliable, judging by reviews?

Reviews of trending lighting mainly cover the finish, ease of fitting and quality of light. Read those that describe a real use rather than the overall rating, then cross-check with the product data sheet: voltage, socket and protection rating are the only stable information.

Our advice for choosing
12V light fittings run on low voltage, via a transformer or a battery, and are installed as ceiling lights, recessed spotlights or pendants. This selection covers motorhomes, caravans, bathrooms and outdoor use, with the key points for choosing a base and an ingress protection rating.