10W LED floodlight

This selection is also available in our French store: Projecteur LED 10 w

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
10W LED floodlight
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

A 10w LED floodlight lights a passage: an entrance threshold, a gate, a driveway, a corner of a garage or a terrace. Its directed beam reaches far for its size, but it stays localised: it is supplementary or security lighting, not the main light of a large yard.

What is a 10 W LED floodlight for and what area does it light?

A 10 W LED floodlight is used to light a specific passage area: entrance, gate, driveway, terrace, corner of a garage or garden. Its white, directed light reaches far for its size, but it stays concentrated on a few square metres. It is installed to see where you step and to deter, not to illuminate a whole yard.

A small floodlight to light a passage, not a whole yard

The right approach is to start from the gesture, not the spec sheet. Someone coming home in the evening needs to see the lock, the two steps and the path to the door. A 10 W format covers this perimeter if it is fixed high up and aimed at the ground. To light a driveway several dozen metres long or a car park, you need several points or a wider model, like those found in outdoor LED floodlights.

10 W or 20 W floodlight: when 10 W is enough

The difference is read in use, not in figures. Ten watts are enough when the area to cover is small and the floodlight is close: a facade wall, a canopy, a shed. Twenty watts and more are justified when the source is far from the area, when the light must cross a wide space, or when several people move at the same time. If in doubt, two small, well-aimed points are better than one large, badly placed floodlight that dazzles. To compare a 10w LED floodlight, look at the luminous flux in lumens and the efficiency in lumens per watt shown on the product sheet.

10 W outdoor LED floodlight IP65: what protection do you really need?

IP65 means the floodlight resists dust and water jets, which covers rain and jet washing on a facade. For exposed outdoor use, this is the comfortable level. Under a canopy, in a closed garage or in a sheltered area, lower protection such as IP44 is often enough, provided it never receives water directly.

IP65, IP44: what the figure allows on a facade

The first digit concerns solids, the second liquids. An IP44 withstands modest water splashes, so a covered wall or a technical room. An IP65 withstands driving rain and jets, which corresponds to a house wall with no shelter above. For a poolside, frequent watering or full-wind exposure, stay with waterproof models: the seal and cable gland make the difference over time.

Where to fix a waterproof floodlight so it stays waterproof

A badly positioned waterproof housing becomes a container. Point the cable gland downwards, so the cable runs down and water does not run into the cable entry. Avoid wall ledges where water stagnates and cornice recesses that trap leaves. A slightly forward tilt lets the back of the facade breathe and limits condensation. The bracket matters as much as the rating: a wall model for facade mounting properly screwed into a sound bracket moves less and keeps its seal in place.

10 W LED floodlight 3000K or cool white: which colour temperature to choose?

3000K gives a warm white light, close to halogen, suited to a terrace or a house facade. 4000K stays neutral and 6500K leans blue, sharper on a garage or a work area. At equal power, the temperature changes the atmosphere produced, not the amount of light.

3000K: the warm light that suits a terrace

On a house, warm light blends with stone, wood or light render facades and stays gentle for neighbours. It is the default choice for an outdoor dining corner, a home entrance or a wall you want to highlight without making it look like a cellar. References in white finishes pair well with this discreet look on a light wall.

4000K and 6500K: keep cool white for work

Neutral white and cool white make outlines sharper, which helps read a label, distinguish tools or check an area. They are therefore reserved for the garage, workshop, technical room or car park. In a garden, they harden foliage and age badly at night.

Colour temperatures of a 10 W LED floodlight
Temperature Atmosphere produced Where to use it
3000K Warm white, close to halogen Terrace, house facade, garden
4000K Neutral white Garage, driveway, technical room
6500K Cool white, very white Car park, building site, work area

10 W LED floodlight with motion sensor: how to set it?

First set the sensitivity so the sensor picks up a passage without reacting to every branch movement, then the timer so the light stays on long enough to cross. The photocell, where present, prevents switching on in broad daylight and saves battery.

Setting sensitivity and timer without unnecessary triggering

Make the adjustments at night or by masking the cell. Lower the sensitivity to minimum, then raise it in small steps while walking in front of the sensor at the place where you actually arrive. A short timer is enough for a passage; too long, it leaves the light on in an empty space and draws attention. Passage detection versions are all set this way, whatever the housing.

Sensor or switch: which to choose for an entrance?

For an entrance or a gate, the sensor saves you hunting for the switch with full hands. For a terrace where you sit, it cuts the light after a few minutes and becomes annoying: a switch, or an outdoor floodlight with sensor that can be forced on, is more comfortable. If the sensor matters more than the luminaire, compare motion sensor floodlights with each other instead.

10 W rechargeable or solar LED floodlight: when to do without a socket?

A rechargeable floodlight is placed where no cable reaches: garden shed, hut, building site, garage without a circuit. The solar version adds a panel and a battery, with a runtime that depends on sunshine and the model. These solutions light in sequences, not continuously all night.

Rechargeable for a garden shed or a building site

You charge it on mains, then unhook it and place it where needed, which avoids running a line. Check the mounting method before buying: some models screw to the wall, others stand on the ground or are carried by hand. The catalogue of rechargeable floodlights covers these portable uses.

Solar, useful only if the panel sees the sun

A panel in shade for much of the day will not charge enough, and winter reduces the input further. Place the panel facing due south, tilted, with no branch or wall shadow, and accept weaker light in overcast weather. For regular path lighting rather than intensive use, rechargeable floodlights with a conventional battery remain more predictable.

How to install and aim a 10 W LED floodlight?

Fix the floodlight high up, on a load-bearing wall or a facade, and aim it downwards to light the useful area without sending light into people's eyes. Connection is made to a protected circuit, after switching off the power, and the cable must stay sheltered from water.

At what height to fix the floodlight so it does not dazzle

Generally allow between two and three metres for an entrance or a passage, high enough for the beam to reach the ground and not the face of whoever arrives. Above a door, offset the unit to the side rather than in line: you see the step, not the bulb. On a terrace, a lower height aimed at plants gives ambient light, provided it stays out of the guests' line of sight. For a mobile setup, stand-mounted floodlights avoid any drilling.

Connection and fixing: what to check before drilling

Switch off the power at the breaker, locate the existing conduit or sleeve, and check the nature of the substrate before drilling: render on insulation will not hold a facade screw. Use plugs suited to the material and leave a little slack so the cable is not taut. If no circuit exists, an electrician is needed to create the line.

Which 10 W LED floodlight to choose according to use?

For a facade or a gate, an outdoor wall floodlight with sensor does the job. For a garage or workshop, a fixed, adjustable and waterproof model is preferred. For a terrace or garden, warm light and a compact format work better than a site floodlight.

For an entrance or a gate

Look for a compact housing, an adjustable bracket and an adjustable sensor: that is the trio that helps day to day. The finish matters on a neat facade, and well-designed floodlights avoid the technical block effect above the door.

For a garage, a workshop or a terrace

In a garage or workshop, priority goes to neutral white, precise aiming and bracket strength: see garage lighting and a workshop floodlight. On a terrace, warm light and a low beam are preferred; lighting a terrace is more about aiming than power. For a garden, see garden floodlights, and for a very large volume, a wider industrial floodlight will be more suitable than a small format.

Which type of 10 W LED floodlight for which use
Use Typical location Recommended floodlight Useful protection
Entrance or gate Facade wall Wall floodlight with sensor IP65
Terrace or garden corner Low wall, post Compact floodlight in warm light IP65
Garage or workshop Interior wall, workbench Fixed adjustable floodlight IP44 to IP65
Area without cable Garden shed, hut Rechargeable or solar floodlight Depends on exposure
Facade to highlight House wall Adjustable design floodlight IP65

Once use and protection are settled, the rest comes down to wall fixing and aiming. To compare the families before deciding, browse the LED floodlight range and outdoor floodlights.

What mistakes to avoid with a 10 W LED floodlight?

Common mistakes: aiming at a white wall at eye level and dazzling everyone, fitting a non-waterproof model in the rain, forgetting to check the fixing type and available power supply, or trying to light a large yard with a single badly aimed small floodlight.

Dazzling the neighbour or passer-by

A floodlight pointed horizontally sends its light to others and makes the street unpleasant. Aim the beam at the ground, keep it away from the property boundary and mask the source with a canopy or ledge. The light must fall on the passage area, not cross the garden. For a colourful, festive atmosphere, RGB floodlights can be adjusted, but never as permanent security lighting.

Choosing without checking the fixing and power supply

Before ordering, check three points: the nature of the wall, the presence of a circuit and where the cable will run. A model intended for indoors will not hold on an exposed facade, and a unit too heavy for a bracket will eventually pull out its plugs. If you are lighting a pond, also look at around a pool: the installation rules there are different.

Aiming and fixing matter as much as power: aim at the wall or area to be lit, and fix the floodlight high enough to avoid glare. If you hesitate between two families, the simplest is to compare the available floodlights and start from your wall rather than the spec sheet. One last guide: to light a whole outdoor space, you often need several units, and the whole of our lighting collection lets you compose it, from the threshold to the back of the garden.

Frequently asked questions

Which 10 W outdoor LED floodlight IP65 should I choose for a facade?

An adjustable wall model, IP65 protected, with 3000K light if the facade is that of a house. The IP65 rating covers rain and jets, and high wall fixing lets you direct the beam at the ground rather than at the street.

Is a 3000K 10 W LED floodlight bright enough?

3000K does not change the amount of light, only its tint: white and warm, close to halogen. A 10 W lights an entrance, a gate or a corner of a terrace, not a whole yard, whatever the temperature chosen.

Rechargeable 10 W LED floodlight: how long does it stay on?

Runtime depends on the model's battery, the brightness level selected and how often it triggers. The product sheet gives the capacity and charging method: that is the only reliable value, and it is not comparable from one model to another.

Can a 10 W LED floodlight be plugged into a socket?

A wall floodlight is normally connected to a fixed circuit, not to a loose outdoor socket. Rechargeable models are charged on mains and then placed without a cable. In both cases, switch off the power before any work.

Do I need an electrician to install a 10 W LED floodlight?

If a circuit already exists and the replacement is like for like, installation is within reach of a careful DIYer, with the power off. Creating a line, running a buried cable or working on the consumer unit, however, is a job for a professional.

Our advice for choosing
The 10 W LED spotlight is the small format that lights up an entrance, a gate, a terrace or a facade wall. Compact models for outdoor mounting, with or without a motion sensor, in white or warm light, sometimes rechargeable or solar-powered.