Wrought iron table lamps
This selection is also available in our French store: Lampes à poser en fer forgé
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
What table size for how many people?
Which tabletop material should I choose?
Extendable or fixed?
How do I care for the tabletop?

The right furniture, in the right place
Check the dimensions with our fit checker and receive pieces made to last. Unsure? Our team will answer your questions.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A wrought iron table lamp sits on a console, a bedside table or the corner of a desk, and is chosen first by height: the shade should reach eye level when seated. The iron gives a stable base to a slender design that stays readable even when the lamp is off, while the bulb and shade make the light.
- What is a wrought iron table lamp
- Where to place it in the home
- Choosing the size
- Shade and bulb
- Connecting several lamps
- Which style to choose
- Installing and caring for it
What is a wrought iron table lamp?
A wrought iron table lamp is a movable light fixture whose base is shaped from worked metal, often patinated or lacquered, topped with a shade. The iron provides a stable footing and a slender design; the light comes from the bulb, diffused by the shade upwards and to the sides.
A worked iron base, not just a rod
The metal is bent then welded: the base draws curves, arches or openwork patterns that a straight rod cannot. This way of working the iron gives a wide, low base that keeps the lamp steady without tipping at the slightest touch. The finish then changes everything. A dark patina ages gently and keeps a handcrafted look, a lacquer gives a crisp black or gold, easier to match with contemporary furniture. Both directions appear in the gold and black finishes.
What light does a wrought iron table lamp give?
Iron produces no light: it holds the bulb and carries the shade. What lights the room is the bulb and shade pairing. A light fabric diffuses an even light, glass lets reflections through, metal directs the flow downwards. Iron works differently: through its silhouette it casts a fine shadow on the wall behind it, and through its finish it sets the tone of the room. A dark structure fades away, a gold patina stands out even when off. To compare the results, browse our full lighting collection.
Where to place a wrought iron table lamp in the home?
Three spots cover most uses: the console or side table near the sofa, the bedside table, and the corner of the desk worktop. In all three cases, iron brings the same thing: a heavy base that does not slide and a narrow silhouette that takes up little surface space.
In the living room, near the sofa
On a console behind the sofa or on a side table at the end of a storage unit, the lamp serves as accent lighting in the evening, when you do not want to switch on the ceiling light. Height matters more than style: the shade should rise above the sofa back to light without glare. A slender iron base slips in where a floor lamp will not fit. To adjust the proportion, compare with the design table lamps for the living room. The modern living room lamps play with the same volumes with cleaner lines.
In the bedroom, on the bedside table
At the bedside, the lamp should light a book without waking the other side of the bed: a compact format, with a shade closed at the bottom, does this job. Wrought iron brings stability, useful when feeling for the switch in the dark. Check that the switch falls under your hand once seated and that the base does not overhang the top. The models designed for the bedroom give size references, as does the black metal bedside lamp.
In the office, in the corner of the worktop
On a desk, the accent lamp is placed to the side, opposite the writing hand, to avoid the shadow of the arm on the paper. A metal shade directed downwards works better than a fabric one that glares. If the surface is narrow, an adjustable lamp solves the question by directing the flow onto the page. See also the metal lamps for the office.
How to choose the size of a wrought iron table lamp?
Start with the height, then the shade diameter, and only then the style. A base that is too tall on a low piece of furniture unbalances the room, a shade that is too wide on a narrow console spills into the walkway.
Base height according to the furniture
The benchmark that works everywhere: the shade should reach the eye level of a seated person, roughly the height of the sofa back. On a low piece of furniture, choose a taller base to make up for it; on a bedside table that is already high, stay within the compact format. Here are the usual orders of magnitude, to adjust according to your furniture.
| Use | Support furniture | Target base height | Shade diameter |
|---|---|---|---|
| Bedside lamp | Bedside table | Compact format, under 35 cm | 20 to 30 cm |
| Sofa accent | Console or side table | Medium format, 35 to 50 cm | 25 to 35 cm |
| Reading in an armchair | Side table | Tall format, over 50 cm | 30 to 40 cm |
| Office | Corner of the worktop | Medium to tall format | 25 to 35 cm |
| Hallway | Low furniture or sideboard | Tall format | 30 to 40 cm |
Shade diameter according to the room
A wide shade lights more broadly but takes up the whole surface: on a shallow console, there is no room left for a book. In a corridor or hallway, stay narrow so as not to block the way. In the living room, a generous diameter suits an isolated side table. The visual rule stays simple: the shade should remain narrower than the furniture carrying it. Compare the volumes with the ceramic versions. The wood models often share the same proportions.
Which shade and which bulb for a wrought iron lamp base?
The wrought iron base does not determine the bulb: the socket does. An E14 socket takes the small bulbs of bedside lamps, an E27 the wider ones. Then choose a warm light temperature for the living room and the bedside, more neutral for working.
E14 or E27 socket, how to tell
Look under the shade, the socket carries its standard engraved. An E14 is narrow, an E27 wider, and a bulb only screws into one of the two. Many small bedside formats are E14, living room lamps E27. Note the standard before ordering the bulb, it is the only mistake that forces you to take everything down again. The design LED lamps show the results obtained with a low-consumption source.
Colour temperature according to use
Around 2700 to 3000 kelvins, the light is warm and suits both the living room and the bedside. Between 3500 and 4000 kelvins, it becomes more neutral, useful for reading or working without fatigue. An LED gives off little heat, which matters when the shade is fabric and close to the metal. Avoid oversizing the power: beyond what the shade lets through, the light heats the fabric and causes glare. A linen shade remains the reference for soft diffusion.
How to connect several lamps to a single power supply?
Several lamps can share the same supply if their plugs are grouped on a power strip or a switched socket, without exceeding the power allowed by the circuit. Add up the bulb wattages, avoid daisy-chaining extension leads, and any connection to the mains must be done by an electrician.
Group the plugs rather than multiplying extension leads
A power strip fixed against the wall or the furniture, with cables kept out of the walkway, solves the case of three lamps on the same wall socket. Add up the wattages marked on the bulbs: a low total leaves margin, a high total means spreading across another socket. Never stack two extension leads end to end and never run a cable under a rug, where it heats up and wears without being seen.
What should stay in the hands of an electrician
Adding a recessed socket, tapping behind a switch, changing a cable's cross-section or connecting to the consumer unit is not a DIY job: this work affects the safety of the circuit and requires a professional's tools and checks. Replacing a bulb or unplugging a lamp remains within your reach. On this point, the design office lamps have the advantage of a single cable with a switch on the cord.
Italian design, art deco or globe table lamp: which style to choose?
Wrought iron suits several styles: art deco with geometric lines, Italian with a sculptural base, globe with a spherical shade, or more understated in a Nordic version. The choice follows the furniture already in place rather than a passing trend.
Art deco wrought iron and its geometric lines
Worked patterns, arches, diamonds, 1930s silhouette: art deco pairs well with lacquered furniture, a bevelled mirror or a graphic floor. The openwork design lets the wall show through, which visually lightens a busy room. The register extends readily towards glass, as in the crystal table lamps.
Italian style and the globe lamp
Italian style plays on a sculptural base and slender proportions: the lamp stands out even when off, so rather in the living room or office than at the bedside. The globe, with its spherical shade, spreads light all around without a marked direction, which suits a bedroom or a reading corner. The Nordic version remains the most discreet option, slender iron and understated tone. The wood models for the living room offer a warm compromise.
| Style | Distinctive signs | Room where it works | To pair with |
|---|---|---|---|
| Art deco | Geometric lines, worked patterns | Living room, hallway | Lacquered furniture, bevelled mirror |
| Italian | Sculptural base, slender silhouette | Living room, office | Ceramic, glass, marble |
| Globe | Spherical shade, diffuse light | Bedroom, bedside | Soft fabrics, light wood |
| Nordic | Slender iron, simple shape, understated tone | Bedroom, office | Light wood, linen, white |
| Handcrafted | Hammered iron, patinated finish | Living room, hallway | Ceramic, raw materials |
How to install and care for a wrought iron table lamp?
A soft cloth is enough to dust the iron, avoid abrasive products that scratch the finish. Check that the base stays flat and that the cable does not run under a piece of furniture. The shade is cleaned according to its material, fabric or glass.
Cleaning the iron without damaging the finish
Dust with a dry or slightly damp cloth, then dry: patina and lacquer dislike standing water and abrasive sponges. Avoid harsh household products on the worked parts, where residue catches. On a handcrafted patina, a fingerprint is better than stripped metal.
Checking stability and cable routing
A wobbling base is corrected with a felt pad: it is the only adjustment that prevents tipping. Run the cable along the furniture, never under a rug, and keep the switch accessible from the sofa or the bed. Three mistakes come up often: a lamp too tall for its furniture, a shade too narrow that concentrates the glare, a bulb too powerful against the fabric. To change register, see the ceramic bedside lamps and the black living room lamps.
One last point before confirming: measure the width of the surface that will hold the lamp and the height between that surface and your eye once seated. These two measurements eliminate most proportion mistakes. The rest comes down to the finish. Find the other lighting families in our lighting catalogue.
Secure payment, tracked delivery, possible returns and Designix customer service: you can compare at your leisure, the collection grid shows the current price of each model.
Frequently asked questions
How to choose a table lamp with a wrought iron base?
Start from the furniture that will hold it: the base height should bring the shade to eye level when seated, and the shade diameter should stay proportionate to the supporting surface. Then come the iron finish and the socket, E14 or E27, to check before buying the bulb.
What is an Italian design table lamp?
It is a lamp whose silhouette is worked like a piece of furniture: sculptural base, slender proportion, often in forged metal paired with a fabric or glass shade. It stands out even when off, which makes it better suited to a living room or an office than a bedside.
What is called a design globe table lamp?
A lamp whose shade is spherical, which spreads light all around without a marked direction. The base, sometimes in wrought iron, stays discreet under the sphere. This broad diffusion suits a bedroom or a reading corner, where you want ambient light rather than a beam.
What are the most beautiful living room lamps?
There is no objective ranking: a living room lamp works when its height matches the furniture, when its shade does not create glare at seating height and when its finish matches the rest of the room. Wrought iron brings a slender design that stays visible even when off.
Can a wrought iron table lamp be used as a bedside lamp?
Yes, provided you choose a compact format whose shade reaches mattress level, with an E14 socket for small bulbs. A warm light and a switch accessible from the bed matter more than the base material. Iron mainly brings the stability of the base and the finesse of the silhouette.





