Wireless LED strips
This selection is also available in our French store: Rubans LED sans fil
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A battery LED strip light runs on batteries, a rechargeable battery or a self-contained power unit: no cable connects the whole assembly to a wall socket. You first choose the runtime and the control method, then the length, the mounting and the protection rating according to the room to be lit.
How does a wireless LED strip work, with no plug or cable?
A wireless LED strip is powered by batteries, a rechargeable battery or a self-contained unit fixed near the strip, with no cable running to a wall socket. The electronics sit in a small box placed at the end of the strip or inside its sleeve. So you check the stated runtime and the charging method before choosing.
It is the solution when the wall is finished and no wire arrives: a line of light under a wall cabinet, a halo behind a headboard, a cupboard that lights up when opened. The range of LED strips is best read by use before reading by reference: the product sheet states the power supply, the length and the control, and that is where the installation is decided.
| Power supply | How the strip is powered | What to check | Typical use |
|---|---|---|---|
| Batteries | Battery box fixed at the end of the strip | Type and number of batteries, stated runtime | Short strip, cupboard, accent light |
| Rechargeable battery | Built-in battery, recharged by USB cable | Charging time, runtime, cable supplied | Headboard, kitchen, TV unit |
| External unit | Box connected to the strip by a short cable | Cable length, how the box is fixed | Long strip, installation behind furniture |
Rechargeable wireless LED strip: built-in battery or USB cable
The battery sits in a box clipped or glued to the end of the strip, sometimes in a thicker part of the sleeve. Charging usually goes through a USB cable, supplied or not depending on the model, sometimes by unclipping the unit. The weight of the box matters on a thin support: behind a headboard or under a shelf, it is better to rest it on a flat surface than to let it hang from the adhesive.
Battery LED strip lights: the format for small spaces
The battery box is screwed or glued right next to the strip. Changing the batteries stays simple, with no tools on most models. This format suits short uses: a cupboard consulted for a few minutes, an accent light in a hallway, a niche. The lighting duration depends on the number of batteries, their capacity and the chosen brightness, never on a single figure.
Remote control or motion sensor: which control for a wireless LED strip?
The remote control handles switching on, brightness and sometimes colour from the sofa; the motion sensor switches the strip on as you pass, with no gesture. The first suits living rooms and headboards, the second hallways, staircases, cupboards and dimly lit passages. A connected strip is controlled via Bluetooth or an app, including in RGB, and battery-powered models are used for a lit costume or a robot.
So the choice is made by the gesture, not by the spec sheet: do you want to decide the moment, or do you want the light to come on its own?
Wireless LED strip with remote control
Switching on, brightness and, on colour models, the hue are adjusted remotely. The range of the remote, the type of battery it uses and the functions actually available are written in the product sheet, otherwise you buy a box that only responds within three metres. For a living room that changes mood, the colour is chosen from the RGB LED strips.
Wireless LED strip with motion sensor
The strip lights up as soon as you enter its field, then switches off after a delay set at the factory or adjustable depending on the model. It is the right choice for a staircase, a night hallway, a cupboard or under a kitchen unit when your hands are busy. The detection range and the delay are also stated in the product sheet.
Where to install a wireless LED strip in the home?
A wireless strip is installed where no cable arrives: under a kitchen unit, in a walk-in wardrobe, along a skirting board, behind a headboard or in a staircase. You choose the room according to the accepted recharging frequency and the light you want.
| Room | Use | Decisive criterion | Type of light |
|---|---|---|---|
| Kitchen | Under the wall cabinet, worktop | Mounting on a rail, measured length | Warm white 3000 K |
| Bedroom | Headboard, bookshelf | Control within reach | Warm white 2700 K |
| Staircase, hallway | Passage lighting | Motion sensor | Warm white |
| Walk-in wardrobe, cupboard | Interior lighting | Sensor or switch | Warm white |
| Bathroom | Around the mirror, niche | Protection rating | Warm white |
| Terrace | Outdoor accent | Protection rating and mounting | Warm white or colour |
Under a kitchen unit or a worktop
Measure the underside of the cabinet from wall to wall, then subtract the thickness of protruding elements. The strip goes set back from the edge, towards the rear of the rail: placed directly above the worktop, it dazzles the standing user. A slightly more neutral warm white makes the worktop readable without turning the stone blue, and the 3000K LED strips match this use.
Cupboard, staircase and headboard
Three different constraints. In a cupboard, you need to reach the box without emptying the shelf. In a staircase, the light must arrive before the foot. Behind a headboard, what matters is the amber white, that of the 2700K LED strips, set back so as not to shine in the eyes. To light a whole space, the Designix light fittings complete the accent lighting.
How many metres to plan for and how to fix a wireless LED strip?
Measure the length to cover before buying, then locate the cutting marks printed on the strip: cutting is only possible at those points. Mounting is done on a clean, dry and smooth surface, or on a profile that stiffens the strip.
The measuring method is simple: useful length from one corner to the other, minus the space of protruding elements, minus a few centimetres of setback so as not to stick into the corner. The general guide to LED strips recalls these markers before ordering.
Cuttable LED strip: how does it work?
The strip has regular cutting marks, placed between two groups of LEDs. Cut only at these marks, with scissors, with the power off. Cutting elsewhere breaks the circuit and switches off the portion after the cut; the rest of the strip keeps working normally. So it is better to calculate generously and remove one extra segment than to cut at random.
Sticking on wood, tiles or plaster
The original adhesive holds on a dusted, degreased and perfectly dry surface. On fresh plaster, a damp wall or a grainy support, it gives way within a few weeks. An aluminium profile or a plastic support glued beforehand provides a flat base and lets you peel off the strip without tearing the paint.
Can a wireless LED strip be placed outside or in a bathroom?
Outdoors, the protection rating stated in the product sheet is the decisive criterion: a strip intended for damp areas is not chosen like a living room strip. For a terrace, a basin or the edges of a pool, also check the mounting and the range of the power box.
The box itself often remains the weak point: it is the part you shelter or keep away from the spray, even when the strip is protected.
Read the protection rating before installing outside
In everyday lighting language, protection ratings increase: the first digits cover dust and solid bodies, the following ones water. A bathroom strip is chosen with a higher rating than a living room strip, and a terrace strip even higher. The waterproof LED strips are designed for these damp rooms, to be checked on each reference.
Terrace, basin and pool edges
On a terrace, fix high up, under a shelf or an awning, and keep the box away from the ground. Around a basin, avoid direct splashes on the power unit. Near a pool, the distance to the water and the mounting matter as much as the strip: the models for pool lighting meet this framework, never an indoor strip placed at the edge.
Which light for which mood: warm white, RGB or RGBW?
Warm white 2700 K and 3000 K lights wood tones and plaster without turning them blue; RGB brings colour, RGBW adds a dedicated white alongside the colours. A bedroom or a living room suits warm white, accent mood lighting suits RGB.
Colour remains an accent: it highlights a niche, a piece of furniture, an outline. It does not replace the main lighting of a room.
2700 K and 3000 K: warm white in the kitchen and living room
2700 K leans towards amber and suits living rooms, bedrooms, wood and natural fibres. 3000 K stays warm but a little more neutral: on a worktop, it renders the colours of food and the grain of stone better. These two temperatures are read on the product sheet, not on the photo, and the 2700 K references as well as the 3000 K ones are compared this way.
RGB and RGBW: mood colour and dedicated white
RGB only produces colours: the room is bathed in a hue, and pure white is missing. RGBW adds separate white LEDs, which allows switching from a coloured mood to a neutral light without changing the strip. For a living room that alternates moods, the RGBW LED strips avoid this compromise, provided you accept the box and the recharging.
How to care for a wireless LED strip and peel it off without damaging it?
An LED strip heats little but dislikes dust and stagnant moisture. Dust it with a dry cloth, recharge the battery before it is completely empty, and put the strip back only on a clean surface, otherwise the adhesive gives way.
Clean and remove a strip without tearing the support
A dry cloth is enough for dust; alcohol and abrasive products attack the sleeve. To peel off, work gradually, pulling parallel to the wall, slightly warming the adhesive with warm air if needed. The original adhesive loses its strength after removal: it must be replaced with a new tape before re-fitting, otherwise the strip falls back down.
Make the battery of a rechargeable strip last
Avoid letting the battery drain completely, recharge before extended storage and do not leave the unit charging for weeks unnecessarily. A strip stored for the season is put back into service after a full recharge, not by chance on use. That is what preserves the stated runtime over time.
Which mistakes to avoid before buying a wireless LED strip?
The classic mistakes: buying the length without measuring, confusing a self-contained strip with a mains strip, neglecting the real runtime, sticking on a dusty or damp wall, and choosing the colour before defining the control and the room.
One last habit avoids many returns: check on the sheet the cable length of the box and its position, because that is what decides the space available at the end of the strip.
Confusing wireless with transformer-free
The word wireless describes the absence of a cable to a wall socket. A battery or rechargeable strip does without a mains transformer because its power supply is self-contained. A strip intended for the mains keeps its voltage and its power supply: this is the case for 220V LED strips and 24V low-voltage LED strips, whose sheet specifies the possible transformer.
Choosing the colour before the room and the control
The useful order is the opposite: the room first, then the control (remote, sensor, switch), then the hue, then the length. The other way round, you buy a coloured strip in a bedroom where you wanted to read in the evening under a warm white. To complete the reasoning, see how to choose a light fitting suited to the room.
Frequently asked questions about wireless LED strips
How do you recharge a rechargeable wireless LED strip?
Most often with a USB cable connected to the battery box, sometimes by removing the unit when it is clipped. Recharging can be done with the power off or during use depending on the model. Avoid letting the battery discharge completely to preserve its capacity.
Battery LED strip lights: how long do they light?
It all depends on the number of batteries, their capacity and the chosen brightness: a short, dim strip lasts much longer than a long strip used at maximum. The duration stated in the product sheet is always read for a specific use, not for continuous lighting.
Cuttable LED strip: how does it work?
The strip has regular cutting marks, placed between two groups of LEDs. Cut only at these marks, with the power off. Cutting elsewhere breaks the circuit and switches off the portion after the cut; the rest of the strip keeps working normally.
Do you need a transformer for a wireless LED strip?
A battery or rechargeable strip does without a mains transformer: its power supply is self-contained. The word wireless describes the absence of a cable to a wall socket. For a strip intended for the mains, the voltage and the possible transformer are specified in the product sheet.
Can a wireless LED strip be placed in a bathroom?
Yes, if the protection rating of the strip and its box matches the humidity of the room, an indication found in the product sheet. Avoid direct splashes on the box and prefer a high mounting, away from the shower spray.
And next: measure, choose the control, then order
Once the room and the gesture are defined, three pieces of information remain to be noted before confirming: the exact length to cover, the desired control method and the protection rating required by the location. With these three points together, the reference is chosen quickly in the full lighting catalogue or among the LED strips in the shop.
Secure payment, tracked delivery, returns and Designix customer service: the order can be tracked, and a doubt about a length or a mounting is settled before shipping rather than after installation.





