Wave floor lamp

A wave street lamp stands on the floor, plugs into a wall socket and dresses a living room corner with its undulating line. Both models in the collection are 120 cm tall, made of metal and plastic, and give off a warm white LED light.

What is a wave street lamp and what light does it give in a living room?

A wave street lamp is a floor lamp whose stem or shade draws an undulation, in metal and plastic. Both models in the collection are 120 cm tall and give off a warm white LED light, between 2700 and 3500 K, suited to a living room.

An undulation in metal or silver steel

The curved tube traces a supple vertical that furnishes a corner without saturating it. The Wave Noir lamp disappears against a dark wall, while the silver Sildanena lamp reflects the light already present in the room. Both rest on a narrow 14 cm square base on the floor. Metal and plastic need only a cloth, no harsh products.

A warm white LED light from 2700 to 3500 K

Warm white sits around 2700 K for an evening mood and moves closer to 3500 K for a more neutral white when reading. In general, a living room works well between 2700 and 3000 K once night falls. The socket is LED on both models, at 12.5 W or 13 W depending on the chosen finish. This power level corresponds to accent lighting, not a ceiling light. To broaden the comparison, browse the contemporary silhouettes in the catalogue.

Where to place a wave street lamp in the living room?

It stands on the floor, in a free corner or next to the sofa, at 120 cm tall, so below the eye line of a seated person. The base takes up 14 cm square: the footprint stays small and you can walk past without trouble.

Next to the sofa or in a free corner

A spot beside the sofa is the most natural place: the light falls on the seat without glare, and the undulating stem fills the gap left by a low piece of furniture. The corner of the room works too, especially when it stays bare. The living room lamps in the selection all share this 120 cm height, designed so you can sit beside them without the shade getting in your eyes. A floor lamp can also be moved if the layout changes.

What matters before choosing the location

First locate the wall socket: the cable must stay free behind the sofa, without crossing a walkway. Then check that the floor is level, otherwise the stem will wobble. Finally, let the silhouette breathe: allow about ten centimetres between the undulation and the wall so the line stands out.

Wave street lamp or globe lamp: which silhouette to choose?

The wave street lamp plays on the undulating, vertical line, the globe lamp on a round, compact volume. The first dresses a living room corner and accompanies a sofa, the second sits near a table or a low piece of furniture. The choice depends on the free space and the lines of the living room.

Globe lamp: a round volume, more compact

A globe shape gathers light in a closed volume and reads as a placed object, almost a large table sculpture. It suits rooms where the eye circles around the furniture. The undulating stem, by contrast, works the vertical void: it makes the wall look taller.

The undulating line as the living room's signature

If the furniture is already highly patterned, a discreet vertical is enough and avoids clutter. If the room is plain, the undulation brings the line that is missing. The pieces with a crafted design follow this logic: one curve, not three.

Black or silver lamp: how to match the finish with the living room?

Black fades into a dark or graphic living room and underlines the metal; silver reflects light and matches light woods. Both finishes share the same material, metal and plastic, and the same warm white light. Choose according to the tones already present around.

Black for a graphic living room

On a dark wall, a concrete floor or an anthracite sofa, black draws a clean line and is barely noticed. It structures without adding colour. This is the choice of the black models when the room already mixes several materials, or of a deliberate black living room.

Silver to brighten a light interior

Silver steel catches daylight and reflects it, which lifts a slightly dull corner. It works well with light woods, white plaster and linen fabrics. For a third option, gold finishes warm the room, provided you do not mix two metals of different shades on the same wall.

Floor lamp, halogen or LED: what are the differences?

A floor lamp plugs in at floor level, with no work needed. The models in the collection are fitted with a 12.5 or 13 W LED socket in warm white, whereas a halogen lamp gives off more heat and a more yellow light. LED replaces it without any loss of visual comfort.

Halogen lamp: what really changes

The action is the same: you plug in, you switch on. What changes is the heat given off, more pronounced with halogen, and the tint, often more yellow. An old halogen lamp can therefore be replaced without touching the electrical installation, without drilling or running a cable.

LED floor lamp: everyday use

LED gives off little heat, which matters when the stem stays within reach of the sofa. Its colour stays stable over time and blends easily with other sources. To compose a room entirely in LED, compare with our LED lighting for the living room. A dimmable model rounds things off well if you want to vary the intensity in the evening.

How to choose an original lamp for a living room?

First look for the line: a strong undulation, a curved tube, a plain finish. Then check the facts: 120 cm tall, LED socket, 12.5 or 13 W, IP20 protection rating, two-year warranty. An original lamp stands out for its silhouette, not for an added accessory.

Original living room lamp: silhouette above all

Look at the curve of the tube, its regularity, the way the base meets the stem. A readable undulation holds its own in an empty space; a soft curve gets lost. Modern lines and raw metal give this clean drawing. A wooden lamp or a glass model plays a different card, softer or brighter.

What the technical sheet must confirm

Height first, 120 cm, which determines the place in the room. Then the socket and power, 12.5 or 13 W, enough for a reading corner. Finally the IP20 rating: it allows use in a dry room, without water. A two-year warranty covers the whole. Budget remains a range criterion, to be balanced between finish and use, without relying on the displayed price alone. The affordable models in the catalogue meet the same need.

How to install and maintain a wave street lamp?

The lamp stands on the floor near a wall socket: no drilling or wall fixing. Check stability on a level floor and leave the cable free behind the sofa. A soft cloth is enough on metal as on plastic, without abrasive products.

Plug in without drilling or work

Unpack, straighten the stem, set the base flat, plug in. The operation takes a few minutes and needs no tools. If the room lacks sockets, a power strip fixed behind the furniture keeps the cable off the floor. The whole our lighting catalogue follows the same free-standing logic.

Clean metal and plastic without damaging them

Switch off the power before touching the shade. Wipe the tube with a soft, slightly damp cloth, then dry. Avoid water near electrical parts and abrasive sponges, which scratch the metal. Once a season is enough to keep the finish clean.

Secure payment, tracked delivery, returns and Designix customer service: you order the silhouette that suits you and check on site, at home, that it holds its place in the living room.

Can a wave street lamp be installed in a bedroom or WC?

Yes in a bedroom, provided the base stays stable and the cable stays out of the walkway. In a WC or bathroom, no: the IP20 rating of these models does not protect against humidity. For a wet room, you need a light designed for that use.

Bedroom lamp: warm white light in the evening

Placed near an armchair or a chest of drawers, it gives evening accent light without lighting the whole bed. The undulation stays discreet in a room where you seek calm. Bedroom lamps are chosen on this criterion of soft light, and an adult bedroom handles the black finish very well.

WC lamp: why IP20 rules it out

A WC or bathroom lamp must withstand splashes and damp air, which IP20 does not cover: it only protects against solid contacts. In these rooms, turn to a light designed for damp environments. Elsewhere, placement is free.

Compare the two finishes, choose the 120 cm height according to the actual floor space, then confirm your model in the selection.

Frequently asked questions