Waterproof LED table lamps

This selection is also available in our French store: Lampes à poser LED étanches

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

What table size for how many people?
Allow about 60 cm per guest: 120 cm for 4, 160-180 cm for 6, 200+ cm for 8. Dimensions are listed on each product page.
Which tabletop material should I choose?
Wood is warm, ceramic is highly resistant to scratches and heat, glass is bright and airy. Choose according to how you will use it.
Extendable or fixed?
Some tables are extendable (with extension leaves), as stated in the title and on the product page.
How do I care for the tabletop?
Wipe with a soft cloth; avoid standing water on wood and abrasive products.
Waterproof LED table lamps
Designix · Design lighting

The right furniture, in the right place

Check the dimensions with our fit checker and receive pieces made to last. Unsure? Our team will answer your questions.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Read the IP rating before anything else: IP44 for splashes near the sink, IP65 as soon as a jet or direct rain hits the housing. Then check the seal, the diffuser material and the stability of the base: this trio decides whether the lamp will survive a winter outdoors or several years near a shower.

What is a waterproof LED table lamp?

A waterproof LED table lamp is a portable fixture whose housing and seals keep water and dust away from the light source and the electronics. You recognise it by the protection rating on its spec sheet: the higher the second digit, the better it resists splashes and then immersion. The first digit concerns dust. On a model with an integrated LED, nothing can be replaced; on a GU10 model, the bulb can be changed and the lamp lives on.

Waterproof LED table lamp for the bathroom

Near the mirror, the light should illuminate the face, not cast a shadow. A colour temperature around 3000 to 4000 K gives a clear result without harshness. A polycarbonate or tempered glass housing wipes clean in one stroke, and a continuous seal can be checked at a glance. Compare with our designer LED table lamps if the room is visible from the hallway.

Waterproof LED table lamp for the shower

In the shower, water comes in jets: aim for a high rating and keep the fixture out of the direct jet, high up or set back. A 12 V low-voltage supply simplifies installation in a damp area, while a 230 V model requires suitable protection. Browse all our lighting fixtures before making your choice.

Where to install a waterproof LED table lamp in the home?

A waterproof LED table lamp finds its place on a terrace, a windowsill or a garden table, where rain and splashes arrive. It serves as ambient light in the evening and can be put away when not in use. The choice comes down to the IP rating, stability and the housing material. A wide base resists wind, a narrow foot topples at the first knock on the table.

Waterproof LED table lamp for the terrace

On a covered terrace, humidity and driving rain are enough to call for IP44 to IP65. Stainless steel and polycarbonate age better than painted aluminium, which marks at the corners. For ambience, warm light around 2700 K prolongs the evening; the Designix lighting catalogue can be browsed by material and style.

Waterproof LED table lamp for outdoor use

In an exposed garden, you need at least IP65, a protected cable and a sheltered socket. An adjustable lamp lights the table and then the path without being moved, which avoids leaving an extension lead lying in damp grass. Adjustable table lamps and treated wood table lamps cover two different registers, to be chosen according to the furniture already in place.

Waterproof LED table lamp for pool, aquarium or boat: what are the differences?

Pool, aquarium and boat do not require the same fixture: a pool implies a fixed installation and possible immersion, an aquarium requires lighting dedicated to living organisms, a boat requires resistance to salt and vibration. A waterproof ambient table lamp does not cover all three uses on its own, and that is normal: they are different trades.

Waterproof LED table lamp for the pool

At the edge of the pool, a table lamp stays above the surface and is satisfied with IP65 or more. It stays away from the bathing area and the wet traffic zone. A submerged fixture, on the other hand, is pool equipment designed for that purpose, with specific mounting and power supply.

Waterproof LED table lamp for the aquarium

A tank requires a spectrum suited to plants, controlled heat and no exposed metal parts. Aquarium lighting is mounted above the water; an ambient lamp placed beside it does not light the living organisms. Never place a housing in the tank.

Waterproof LED table lamp for the boat

Salt, spray and constant vibration: a corrosion-resistant housing, a low-voltage supply suited to on-board use, and a mounting that does not work loose. A portable lamp is stowed before sailing, a fixed fixture stays exposed. Also see the table lamp collection for cabins.

How to connect several lamps to a single power supply?

Several lamps can share one supply: they are wired in parallel, each receiving live and neutral, in a junction box with suitable terminals, after switching off the power. You must stay within the circuit's power rating and the wire cross-section. For plug-in lamps, a power strip is enough and avoids any work.

Several lamps on one socket: the no-work solution

Power strip, multi-socket or switched block: plug-in lamps can be combined without opening a wall. Add up the wattages indicated on each fixture and keep a margin below the power strip's limit. A cable should never pass through a doorway without protection. The metal desk versions are well suited to this series mounting on a power strip.

Using a junction box: what to comply with

Switch off at the breaker, identify the circuit, connect in parallel and use terminals of the same cross-section: three lamps on the same supply line pose no difficulty if the combined power stays within the circuit's limits. If in doubt about the conductor cross-section, have it checked by an electrician.

LED ceiling light or LED chandelier: should you add a table lamp?

A modern LED ceiling light illuminates a whole living room from the ceiling without cluttering the floor; an LED chandelier brings a decorative presence to the centre. In both cases, the table lamp remains complementary: it brings light down to reading height and illuminates a corner that the ceiling leaves in shadow. A single overhead source tires the eye in the evening.

Which modern LED ceiling light for a living room?

A diffusing ceiling light, from 2700 to 3000 K, gives comfortable general light; a more powerful model suits deep rooms or use above a table. Check the diameter against the room and the clear height beneath the fixture. Designer table lamps for the living room then fill in the shadow areas.

LED living room chandelier: when to prefer it?

The chandelier takes the centre of the room and structures the space, often above a table or a void. It requires height and a solid fixing point. If the ceiling is low, a flat ceiling light and a table lamp offer the same comfort with less constraint, as shown by our modern living room models.

Powerful LED wall light or table lamp: which complement for the living room?

A powerful LED wall light illuminates a wall or a worktop without taking up surface space, while a table lamp can be moved and adjusted. In a living room, the wall light highlights a section of wall, the Italian-style table lamp brings the line. Both are chosen for the light they produce, not for the photo alone.

LED living room wall light

Mounted high on a side wall, the wall light creates a halo that makes the room feel larger and replaces a ceiling source in a corner. Plan its power supply before painting work. Our black table lamps for the living room then echo the same graphic register.

Powerful LED wall light: for which wall?

A high output is justified above a low sideboard or a desk, provided the beam is directed downwards to avoid glare. On a bare wall, a moderate output and indirect light are better. For a workstation, compare with our LED desk table lamps.

Italian design table lamp: what sets it apart

Simple lines, crafted materials, glass or ceramic diffuser: the Italian style is recognised by restrained shapes and the quality of the light emitted. A piece in white ceramic sits well on light wood furniture. If you are looking among the most beautiful living room lamps, trust the lit result, not the catalogue.

How to install and maintain a waterproof LED table lamp?

Place the lamp on a stable surface, away from a direct jet, with the cable protected from puddles. For maintenance, wipe the housing with a soft cloth, without abrasive products, and check the seal after every opening: a pinched or dry seal lets water in.

Cleaning a waterproof lamp without damaging its seal

Damp cloth, mild soap, drying before closing again. No alcohol, no abrasive sponge on a polycarbonate diffuser, which scratches and loses its clarity. A little silicone grease on a dry seal extends its elasticity, without ever forcing it when reassembling. Linen shades and kitchen worktop lighting call for the same restraint with cleaning products.

What to check after opening the housing?

The seal in place in its groove, without folds or pinching, the screws tightened without excess, the cable gland clamping ring properly secured on the cable. A lamp that takes in water after reassembly almost always comes from a badly refitted seal. Mistakes to avoid as well: placing an indoor model outside, leaving a socket in a puddle, pulling on the cable to unplug. To change room, start again from all our lighting families.

Protection rating to look for depending on use
Use Water exposure IP rating to look for Point of vigilance
Bathroom, near the sink Splashes and steam IP44 minimum Clean seal, wipeable housing
Shower Jets and run-off IP65 or more Stay out of the direct jet
Covered terrace Humidity and driving rain IP44 to IP65 Stable mounting, non-corrosive material
Garden, exposed outdoor Rain and dust IP65 minimum Cable and socket sheltered
Poolside Splashes IP65 or more Keep away from the bathing area
Boat Salt, spray, vibration IP65 or more Suitable mounting and power supply
Which fixture for which room, and where to place the table lamp
Room General light Supplementary light To check
Living room Ceiling light or LED chandelier Table lamp or wall light Height of the light point, colour temperature
Bedroom Discreet ceiling light Bedside table lamp Control accessible from the bed
Office LED ceiling light Adjustable table lamp Lighting without reflection on the screen
Kitchen Ceiling light or spotlights Table lamp on the worktop Proximity to water and hobs
Bathroom Ceiling light or wall light Waterproof table lamp near the mirror IP rating and distance from the bath
Terrace Wall light or bollard Waterproof table lamp IP rating, stability, protected cable

One last reference point before ordering: note the available height and width on your furniture, the presence of a nearby socket and the IP rating required by the room. These three pieces of information are enough to rule out the models that will not suit. At Designix, payment is secure, delivery is tracked and returns are possible; customer service will answer if a technical point remains unclear.

Which waterproof LED table lamp for the bathroom?

Look for an IP rating covering splashes, a seal in good condition and a housing that withstands humidity. Placed on the cabinet or shelf, it serves as supplementary light near the mirror. The immediate surroundings of the bath require higher protection, and a low-voltage model simplifies installation.

Can a waterproof LED table lamp be installed in a shower?

In the shower, water comes in jets: a high IP rating and a continuous seal are essential, and the fixture must stay out of the direct jet. A table lamp placed high up, away from the shower head, limits splashes. For a fixed installation in the shower volume, a model designed for that use is preferable.

Waterproof LED table lamp for an aquarium: is it possible?

An aquarium requires dedicated lighting: a spectrum suited to plants, controlled heat, no metal parts exposed to water. A waterproof ambient table lamp does not replace aquarium lighting. Check the mounting outside the tank and cable routing away from splashes.

Waterproof LED table lamp for a boat: what are the constraints?

On a boat, humidity, salt and vibration are constant: favour a corrosion-resistant housing, a low-voltage supply suited to on-board use and a mounting that does not work loose. A waterproof table lamp is easy to stow before sailing, unlike a fixed fixture.

Cuttable LED strip: how does it work?

A cuttable LED strip is cut only at the printed marks, at regular intervals, with pliers or scissors. Each section remains usable if it is connected to the corresponding power supply by a connector. Cutting between two marks breaks the circuit and the section no longer lights up.

Our advice for choosing
Sealed LED table lamps light up wet rooms, the terrace or the poolside without fearing splashes. Each model is chosen for its protection rating, its material and its power supply, for reliable light where humidity is constant.