Vintage bathroom wall lights

Plan for two wall lights, one on each side of the mirror, mounted at the same height and the same distance from the edge. This vintage selection is entirely IP20, so it must be installed outside the water zone: metal, glass or crystal, with a warm white light of 2700 to 3500 K or a cool white of 4500 to 6500 K depending on the product sheet.

• Which vintage bathroom wall lights should you choose for a bathroom?
• Where should you place a vintage bathroom wall light in the bathroom?
• What are the lighting trends for the bathroom?
• What are the trends for wall lights in 2026?
• Which socket and light colour should you choose for a bathroom wall light?
• How do you match the vintage wall light with the decor and furniture in the room?
• Can the same vintage wall light be installed in the living room, bedroom or toilet?
• How do you install and maintain a bathroom wall light?

Which vintage bathroom wall lights should you choose for a bathroom?

Start with the material and the shape: gold or black metal, glass, crystal, tubes, balls or ovals. Then check the socket, E27, E14, G4 or GU10, and the light temperature stated on the product sheet. All these wall lights are IP20: they are installed outside the water zone.

Vintage bathroom wall light: which shape should you choose?

A tube shape lines up with the width of the mirror and lights without casting a shadow under the chin. The Qari wall light sets two opal tubes of 5 cm by 40 cm on a gold or black mount, with a G4 socket, and is dimmable. A glass ball, like the Kena, works better on a small vanity mirror or in a dark corner. For a long wall, look at the retro models with several light points.

Vintage bathroom wall lights: metal, glass or crystal?

Metal provides the structure, glass diffuses, crystal catches the light and makes the wall above the vanity top sparkle. The brass finishes take on a warm patina, while the black versions stand out against light tiles. The Uare wall light pairs gold metal with tiered crystal prisms, at 25 cm or 42 cm wide, with a G4 socket and warm white light. For a softer look, vintage glass pairs well with a second-hand mirror. Find these ideas in the design wall lights, and the whole catalogue in our lighting universe.

Where should you place a vintage bathroom wall light in the bathroom?

As IP20, these wall lights are installed outside water spray: on either side of the mirror, above the vanity top, near the door or in the toilet. For a point right next to the shower or bathtub, you need to switch to IP44 wall lights or IP65 models near the shower. In general, the centre of the wall light is placed around 1.70 m from the floor, so that the light reaches face level and not above the head. One wall light on each side of the mirror is better than a single point on the ceiling, which leaves the face in shadow.

What are the lighting trends for the bathroom?

Gold metal, brass and glass are coming back around the mirror, with tube or ball shapes and a warm white light for a soft look. LED features in most models and a dimmer lets you adjust the intensity between morning and evening.

Why two wall lights rather than one above the mirror?

A single source above the mirror casts the shadow of the nose and eyelashes onto the face. Two side wall lights, at eye level, light from the front and keep the features readable. This is the most common setup in renovated bathrooms, and it works as well with a round mirror as with a rectangular one. The Éclat Classique, in glass and metal at 41 cm wide, works on its own on a small wall.

Does LED change the mood of the room?

LED does not change the colour, it sets the temperature at the source: everything depends on the white chosen on the product sheet, warm around 2700 to 3500 K or cool around 4500 to 6500 K. Above all it provides a stable light from the moment it is switched on and a bulb that gives off little heat. For night-time rooms, warm white remains the most comfortable. The dimmer, found on some of the models, lets you lower the intensity in the evening without changing the wall light.

What are the trends for wall lights in 2026?

Wall lights are becoming graphic and vertical: opal tubes, crystal prisms, glass balls and adjustable cylindrical heads, on gold or black metal frames. Warm white is the most common temperature, LED dominates and dimmers are spreading. An adjustable head like the Jilo works as well above a vanity top as above a desk. Crystal blocks on a frame, like the Reflection, play on the contrast between metal and transparency. For a stronger period feel, look at the models with an Art Deco feel and the wood versions, useful in a room already dressed in warm tones.

Which socket and light colour should you choose for a bathroom wall light?

The socket determines the bulb: E27 for large glass balls, E14 for small shades, G4 for tubes and prisms, GU10 for adjustable models. As for light, warm white 2700 to 3500 K relaxes, cool white 4500 to 6500 K gives a crisper look.

E27, E14, G4 or GU10 socket: how do you find your way?

G4 is a small pin socket, housed in slim shapes like the tubes of the Qari or the Uare wall light. E14 takes the small screw bulbs of models with drops, like the Orsay. E27 fits the wider glass balls, the Kena or the Éclat Mystique. GU10 concerns adjustable heads, such as the Erao and its butterfly head.

Warm white or cool white in front of the mirror?

Warm white softens skin tones and suits both waking up and evening care. Cool white makes colours truer and is mainly used for precise make-up or a very dark room. Some models, such as the Kairo or Reflection, accept both temperatures depending on the bulb fitted. Other product sheets state no temperature: in that case, the mood depends only on the bulb you choose.

How do you match the vintage wall light with the decor and furniture in the room?

Line up the finishes: gold with brass and light wood, black with iron and copper, clear or amber glass with a second-hand mirror. A vintage wall light goes with an antique piece of furniture, a vintage leather armchair in an open room or a modern kitchen decor, as long as you keep the same family of metals.

How do you strip a second-hand piece of furniture before installing the wall light?

Start by sanding by hand, then apply a stripper to a small hidden area to test how the wood reacts. Rinse, leave to dry completely, and only install the wall light after this step: the fumes from a stripper remain aggressive to untreated metal. A light piece of furniture pairs well with the wood versions, a patinated piece with brass.

How do you combine gold, black and white in the same room?

Choose one dominant finish and keep the other for the taps or handles. A black wall light with clear glass fits anywhere, a gold model with crystal calls for a plain mirror so as not to overload the space. Between the two, the worked metal models bridge the gap.

Can the same vintage wall light be installed in the living room, bedroom or toilet?

Yes: several models in the selection are also stated for the living room, bedroom, hallway or dining room. A glass ball lights a reading corner, a rope arm dresses a hallway, and a black model makes a discreet toilet light.

Can a bathroom wall light light a hallway?

Nothing stops it: IP20 is enough in a hallway or entrance, where there is no spray or high humidity. The ball format or the twisted rope arm of the Nari works on a passage wall. For a staircase, choose a compact model and look at the hallway and passage wall lights.

What dining room light should you plan in addition?

The table light lights the work surface, the wall lights light the walls: the two complement each other if the colour temperature stays the same. In an open living room, the living room wall lights and a pendant above the table coexist without a break. For rooms where you cook, a dedicated wall light completes the work surface.

How do you install and maintain a bathroom wall light?

Switch off the power, fix the mount to the wall, connect according to the instructions and fit the bulb with the right socket. Clean the glass and metal with a soft cloth, without abrasive products. When buying, Designix offers secure payment, tracked delivery, returns and customer service, with a 2-year warranty on the whole selection.

How do you fit the wall light step by step?

Mark the height of the two points in pencil before drilling, aiming for the same measurement on each side of the mirror. Switch off the circuit breaker, drill, fit the plugs suited to the wall, then fix the backplate. Connect the wires according to the model's instructions, restore the power and screw in the bulb with the right socket. If you are unsure about the connection, an electrician should carry out the work.

How do you clean glass, metal and crystal?

A slightly damp microfibre cloth is enough for glass and crystal, then a dry cloth to avoid marks. On metal, avoid abrasive products and scouring pads that scratch the finish. Never spray directly onto the wall light: switch off the power before any handling that involves pressure.

To choose, rely on three details from the product sheet: the socket, the light temperature and the protection rating. Once the model is chosen, the full lighting catalogue lets you find matching finishes for the rest of the house. Payment is secure, delivery is tracked and returns remain possible if the shade does not suit the wall.

Frequently asked questions