USB LED strip light

This selection is also available in our French store: Réglette LED usb

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
USB LED strip light
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Measure the shelf, cupboard or backsplash you want to light, then choose a USB LED strip light whose length covers that area and whose cable reaches a USB socket. It sticks or screws on without any work, runs on a rechargeable battery or on batteries, and is enough to light a worktop, a hallway or the inside of a cabinet.

What is a USB LED strip light?

A USB LED strip light is a slim, elongated fixture powered by a USB cable, most often through a rechargeable battery, with no mains connection. It is fixed under a shelf, a worktop or a cabinet and lights a precise area. Some models run on batteries.

The light is grazing: placed under a cabinet, it falls on the work surface instead of spreading into the room. It is supplementary lighting, not a ceiling light. For general lighting, look instead at the Designix lighting catalogue, which brings together pendants, ceiling lights and wall lights.

Rechargeable USB LED strip light or battery strip light

An built-in battery recharges by cable and saves buying batteries, but you have to remember to charge it and keep the cable within reach. The battery model suits a cupboard or a little-used hallway: you replace the batteries when the light dims, without looking for a socket. In both cases, the fixture stays self-contained, with no mains connection and no chasing into the wall. Battery models are gathered in the rechargeable LED strip lights.

USB C or micro-USB LED strip light: what is the difference?

The USB C connector plugs in either way round, which saves turning the cable over under a poorly lit cupboard. It also matches the charger of many phones, so one is easy to find. Micro-USB remains common on compact formats: it works just as well, but requires keeping its dedicated cable, often shorter. In both cases, check that the USB socket stays accessible once the fixture is fixed.

Where should you install a USB LED strip light in the kitchen?

In a kitchen, the USB LED strip light goes under the upper cabinet, directly above the worktop, or along the backsplash. It lights the chopping area without casting a shadow. Choose a length close to that of the cabinet and a switch that stays accessible once the strip light is fixed.

Kitchen LED strip light with switch: why it is more practical

A switch on the fixture saves unplugging the cable to turn it off, an awkward move when the strip light is stuck under a cabinet. Place it on the side where you stand while preparing, not on the wall side. On sensor models, the switch mainly serves to choose between automatic and permanent mode.

Under the upper cabinets or along the backsplash

Under the upper cabinet, the light falls on the worktop and does not reach your eyes: it is the most comfortable position for cooking. Along the backsplash, the light highlights the material and lights the back of the worktop. If you are looking for a fixed solution rather than a mobile supplement, compare with those that plug directly into the mains.

Choosing your USB LED strip light by room
Room Intended use What matters Preferred fixing
Kitchen Lighting the backsplash and worktop Length covering the area, accessible switch, neutral light Adhesive or screws under the upper cabinet
Study Working without glare Adjustable colour temperature, even diffuser Bracket or adhesive, set back from the screen
Bedroom Supplementary light in the evening Warm white, low intensity, dimmer Wall fixing or under the bedside shelf
Hallway and stairs Automatic passage lighting Motion sensor, suitable range Screws or adhesive at step height
Cupboard and wardrobe Seeing inside without lighting the room Low profile, triggered on passage Adhesive or magnetic strip
Bathroom Supplementary lighting IP rating suited to humidity Screws on a fixed bracket

How do you choose the length and power of a USB LED strip light?

First measure the surface to be lit, then check the length of the fixture and of the USB cable. The power in watts indicates consumption, not the amount of light: it is the flux in lumens and the quality of the diffuser that determine the result. A steady model is better than a very powerful but glaring one.

Measure before buying: shelf, hallway, cupboard

Take the usable dimension, not the total dimension of the cabinet: an 80 cm shelf takes a slightly shorter strip light, otherwise it overhangs and catches. Add the distance between the fixture and the USB socket, which is often where the cable falls short. In a hallway, allow for the width of a passage rather than the length of the wall. For a cupboard, measure the depth: beyond that, the light does not reach the back.

Lumens or watts: what really matters

Watts describe the electricity consumed, lumens the light actually emitted. For a worktop, aim for a strong flux but diffused by a milky cover or an aluminium profile: the light is more even and the eye does not see the bright spots. A LED bar that is too directional creates a bright patch and leaves the rest in shadow. LED bars and strips are compared on this criterion above all.

USB LED strip light with motion sensor: for what use?

The motion sensor suits short passage areas: hallway, stairs, entrance, inside a cupboard. The light comes on as you pass and turns off by itself, with no switch to find. Check the sensor range, the delay and the presence of a permanent mode if you also want to be able to leave it on.

Hallway, stairs, cupboard: the right places

In a hallway, fix the strip light at the entrance of the passage, facing along the direction of travel, otherwise it comes on when you have already passed. On a staircase, place it at step height, on the handrail side. In a cupboard, the sensor triggers on opening and makes it unnecessary to look for the switch with your hands full. Dedicated models are gathered in the motion sensor strip lights.

What to check before buying

Three points decide comfort: the range of the infrared sensor, the delay (the time before switching off) and the possibility of disabling detection. Without a permanent mode, it is impossible to light during a long tidy-up. If the area has a fixed power supply, the mains versions with sensor avoid the question of recharging.

How do you fix and recharge a USB LED strip light?

On a lacquered cabinet or a cupboard, adhesive or a magnetic strip is enough, provided the surface is degreased before sticking. On a partition or in a passage area, a screwed fixing holds better. For recharging, a removable battery or a USB C port saves dismantling the fixture at every charge.

Adhesive, magnetic or screwed: which fixing to choose

Clean with alcohol then let it dry: on a dusty surface, the adhesive gives way within a few days. Magnetic is suitable for metal supports and lets you unhook the strip light to recharge it. On plaster or wallpaper, adhesive does not hold: switch to a screwed bracket. Models designed to stay in place are in the wall lights and wall strip lights.

Recharging: charging time and removable battery

A removable battery can be replaced and recharged separately, without putting the lighting out of action. A USB C port saves looking for a specific cable. For daily use, keep the cable plugged into an accessible socket: the strip light stays charged without thinking about it. Found the right model and the right length? Browse the range of LED strip lights to compare fixings.

USB LED strip light, cuttable LED tape or LED tube: what are the differences?

The USB LED strip light is self-contained and can be moved; LED tape, on the other hand, is connected to the mains via a transformer and is cut only at the marked points, otherwise the segment no longer lights. The USB LED tube is a rigid fixture for a desk or workshop, while the USB LED ceiling light covers a larger surface.

Cuttable LED tape: how does it work?

Tape is cut at the marks printed on the circuit, never between two. Each portion keeps its power supply and its transformer. Cutting elsewhere breaks the conductive track and the portion stays off. Allow for the usable length before cutting and keep the supplied connectors. Tape suits long, flat lines: backsplash, niche, under a TV cabinet.

USB LED ceiling light or USB LED tube: in which cases?

The LED tube, often around 120 cm, is used at a desk or in a mobile workshop, placed on a hook or bracket. The USB LED ceiling light lights an entire surface and serves as the main lighting in a small space. For targeted supplementary light, the strip light remains the right format.

USB LED strip light, LED tape and LED tube: three different lights
Type Power supply Installation Cuttable Typical use
USB LED strip light Battery rechargeable by USB cable No work, adhesive or screws No Under-cabinet, hallway, cupboard
LED tape Mains via transformer Flexible adhesive on a flat surface Yes, at the cut marks Backsplash, niche, TV cabinet
USB LED tube USB or battery depending on model Hook, bracket or adhesive No Desk, mobile workshop
220V LED strip light Direct mains Screws, with connection No Garage, workshop, work room

How do you match the light of a USB LED strip light to the room?

A warm white relaxes and suits a bedroom or a reading corner; a neutral white renders colours accurately above a worktop. A very cool white is tiring in a small space. If the strip light offers a dimmer or a remote control, check that it remembers the last setting chosen.

Warm white or cool white: which temperature to choose

As a general guide, a warm white sits around 2700 to 3000 K, a neutral white around 4000 K, a cool white above 5000 K. For a bedroom, stay in the warm range and lower the intensity. For a kitchen where you chop, neutral shows the true colour of food. Cool is reserved for detailed work, not for rest.

Dimmer and remote control: everyday comfort

A dimmer adjusts the intensity according to the time: strong when preparing, soft in the evening. The remote control saves contorting yourself under the cabinet. Above all, check the memory of the last setting: without it, everything has to be readjusted at every switch-on. To light an entire room rather than a line, an LED ceiling light remains more suitable than a supplementary LED lamp.

Can a USB LED strip light be used in a bathroom or outdoors?

In a bathroom, a USB strip light is suitable as supplementary lighting if it is placed away from water splashes and if its IP rating is suited to humidity. Outdoors, the rechargeable USB power supply is not the right solution: prefer a sealed fixture designed for that use.

IP rating: the criterion to check first

The two-digit IP rating indicates protection against dust and then against water: the higher the second digit, the better the fixture resists splashes. In a bathroom, keep the strip light away from the shower and the bath, and fix it on a stable bracket. Find the suitable models in the bathroom lighting and the IP65 protection ratings.

When to switch to a mains or sealed strip light

As soon as the fixture is fixed, exposed to splashes or to rain, USB recharging becomes a constraint: the device has to be unhooked to charge it. Then switch to a sealed strip light, to sealed LED strip lights or to a model of outdoor lighting. For a covered terrace, look at the sealed outdoor models. A very damp workshop is treated the same way, with fixed workshop lighting.

Before choosing a USB LED strip light, check the usable length and the power of your USB port. For a garage, the strip lights designed for the garage light more widely, and the lighting fixtures of the same room complete the installation.

Frequently asked questions

Kitchen USB LED strip light: how do you install it?

Find the width of the upper cabinet, degrease the surface then stick or screw the strip light directly above the worktop, on the side opposite your eyes to avoid glare. Leave the USB cable accessible and check that the switch remains reachable once the fixture is in place.

Rechargeable USB LED strip light: what battery life should you expect?

Battery life depends on the length of the fixture, the intensity chosen and the battery capacity: it therefore differs from one model to another. Consult the product sheet for the value stated by the manufacturer, and prefer recharging by a standard cable so as not to depend on a proprietary charger.

USB C LED strip light: what is the advantage over micro-USB?

The USB C connector plugs in either way round, which saves turning the cable over in a hard-to-reach area such as under a cupboard. It also matches the cable of many phones and laptops. Micro-USB remains common on more compact models, with a dedicated cable to keep.

USB LED strip light with motion sensor: is it reliable in a hallway?

Yes, it is one of the most suitable uses: the light comes on as you pass and turns off by itself. Check the sensor range, the delay and the fixing method. A narrow hallway needs a sensor facing along the direction of travel, otherwise the strip light comes on too late.

How do you fix a USB LED strip light without drilling?

Use the supplied adhesive or a magnetic strip on a clean, dry, dust-free surface, pressing for a few seconds. On wallpaper or crumbly plaster, adhesive holds poorly: prefer a screwed bracket or a magnetic bracket stuck to a metal plate.

Our advice for choosing
A USB LED strip light recharges and installs without wiring: stuck or screwed under a shelf, a worktop or a piece of furniture, it lights a precise area. Models differ in length, mounting, USB port and motion sensor.