Solar wall lights with motion sensor
This selection is also available in our French store: Appliques murales solaires à détecteur de mouvement
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?
An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
The built-in solar panel recharges the unit in daylight, then the sensor switches on the LED as you pass. No wiring, no plug: these solar motion sensor wall lights run at 9 W, in warm white from 2700 to 3500 K, with an IP65 rating for entrances and outdoor areas.
How does a solar motion sensor wall light work?
The built-in solar panel recharges the unit during the day, then the sensor takes over at nightfall: the LED comes on as you pass and switches off when the area is quiet again. This selection runs on LED at 9 W, with a warm white light between 2700 and 3500 K.
Solar motion sensor wall light: what triggers it
What triggers it is movement within the sensor's field, never simply nightfall. A built-in cell tells day from night: while it is light, the wall light stays off even if someone walks past. Once evening comes, the sensor becomes active and switches on the LED. The principle is the same on the outdoor LED sensor wall lights in the range.
What light does a solar LED wall light give?
A warm white, between 2700 and 3500 K, the tone of a living room light rather than the cold beam of a floodlight. At 9 W and in LED, this light is enough to find your bearings, see a step and locate a lock. The G4 base suits small-format LED bulbs: no tungsten filament is needed to get this look. For an overview, browse our full lighting range.
Where to install a solar motion sensor wall light?
These wall lights are made for entrances and outdoor areas: facade walls, plinths, boundary walls, around a door or an open stairwell. The IP65 rating allows installation exposed to rain. Since they switch on as you pass, the access stays lit only when someone arrives, with no continuous lighting.
Solar outdoor motion sensor wall light: entrance, facade, gate
On a facade, place the wall light beside the door rather than directly above it: the approach of a person then falls within the detection axis. On a gate or boundary wall, the solar panel must stay clear of foliage and the wall's cast shadow. The outdoor sensor models follow the same logic, as do the waterproof outdoor wall lights for highly exposed walls.
Can you light an outdoor staircase with this type of wall light?
Yes, provided the solar panel keeps access to daylight. Aim the detection towards the arrival of the steps, not towards the permanent walkway. An open stairwell or an outdoor corridor works well: the light comes on the moment you set foot. See also the staircase wall lights and corridor lighting.
How to choose your solar motion sensor wall light?
Start with the protection rating, here IP65 across the whole selection, then the footprint once installed: the models in this collection measure 5 cm or 15 cm. Then check the source, solar LED with a G4 base at 9 W, and the dimming, available on every reference.
IP65 rating: for which exposure?
IP65 means the unit is protected against dust and water jets. In plain terms: installation on a facade, under a canopy or on a wall catching rain is no problem. It is not an immersion rating, so avoid drowning the wall light in a planter or a hollow that holds water.
G4 base and dimensions: what to measure before fixing
Measure the space available between the wall light and the nearest obstacle: an opening door, a shutter, a gutter. The 5 cm and 15 cm of this selection correspond to different footprints depending on the reference. The G4 base determines bulb replacement, to be chosen from the same LED family.
| Feature | What this selection offers |
|---|---|
| Technology | Solar with built-in panel and LED |
| Power | 9 W |
| Light temperature | Warm white, 2700 to 3500 K |
| Base | G4 |
| Protection rating | IP65 |
| Dimensions | 5 cm and 15 cm depending on the model |
| Dimming | Available |
Which style of solar wall light for a modern or contemporary facade?
These wall lights have a square design, modern and contemporary in character, worked in metal, glass, iron or acrylic. Colours range from black to gold via brown: a dark tone blends into a dark facade, while gold draws the eye more to the entrance.
A square shape and understated materials for a recent facade
The square sits well on smooth render, cladding or pointed stone, because it stays legible without overloading the wall. The metal and glass assembly gives a light that ages well, with iron adding a stronger design. For a more elaborate look, see the designer LED wall lights and modern outdoor lighting.
Black, brown or gold: how does it look on the wall?
Black disappears on a dark facade and creates a sharp contrast on a light wall. Brown echoes old renders and wooden joinery. Gold brings out an entrance and matches ironwork. These three finishes appear on the black metal wall lights and the gold or black finishes in the shop.
| Finish | Associated materials | Effect achieved |
|---|---|---|
| Black | Metal, iron, glass | Blends into a dark facade, highlights a light wall |
| Brown | Metal, iron | Echoes old renders and wooden joinery |
| Gold | Metal, glass | Brings out the entrance, matches ironwork |
| Glass and acrylic | Glass, acrylic | Soften the square design and diffuse the light |
A concrete example from the collection: the Eior outdoor light with built-in panel, in metal and glass, IP65, G4 base.
Which mistakes should you avoid with a solar motion sensor?
Three mistakes come up again and again: aiming detection at a permanent walkway, leaving the solar panel in the shade, and mounting the wall light too high for movement to be properly picked up. Aim at where people arrive and keep the panel clear, exposed to daylight.
Motion sensor: catch arrivals, not the street
A wall light that sweeps the street comes on all night for passers-by and drains for nothing. Turn the detection field towards the doorstep, the driveway or the first step. On classic motion sensor wall lights, this orientation setting changes the whole experience.
Solar panel in the shade: the main cause of failure
A panel covered by a deep canopy, a branch or a gutter no longer charges enough, and the wall light ends up giving a weak light. Clear the area in front of the panel and clean it through the seasons. This is the number one check before suspecting anything else.
How to install and care for a solar wall light?
Installation is directly on the wall, with no wiring: a sound surface and a panel facing daylight are all you need. Place the detection at walking height, then clean the glass and the panel from time to time to keep the same light level.
At what height should a motion sensor wall light be installed?
Generally, an entrance wall light is fixed around 1.80 m to 2.20 m from the ground, high enough not to get in the way, low enough to sweep a figure. On a staircase, you go down rather to 1 m to 1.50 m above the steps. Every reference in the selection installs without a cable, which makes adjustment easier.
Cleaning the glass and the solar panel
A soft cloth is enough for the glass, with no abrasive product. On the panel, remove leaves, cobwebs and dust, which reduce charging. Do this check twice a year, when the seasons change. See the dimmable references to adjust the light after installation.
Can you install a solar wall light in a living room or bedroom?
These wall lights are designed for outdoor and entrance use, where the solar panel receives daylight. In a living room, a bedroom or a damp room, a mains-powered wall light remains more suitable: these references can be found in our indoor collections.
Living room and adult bedroom wall lights: which indoor solution?
Indoors, the solar panel has no charging source: better to choose a wall light connected to the mains, which switches on on demand. For a living room, see the living room wall lights; for a bedroom, the bedroom models offer sizes and tones designed for rest.
Damp rooms and bathrooms: what to choose?
In a bathroom, the constraint is humidity and proximity to water, not the sun. A wall light designed for damp rooms remains the right answer, such as the bathroom wall lights. For a different feel, the designer wooden wall lights and the retro and art deco spirit bring a different finish.
How to match a solar wall light with the rest of the outdoor lighting?
For a coherent facade, keep the same family of shapes and finishes from one light point to the next, and reserve detection for arrival areas. The dimming available on these wall lights lets you align their intensity with that of the fixed lighting already in place.
The same finish on every light point on the facade
Two identical wall lights either side of a door, or a solar wall light joining black fixtures, give an orderly facade with no effort. Mixing a gold finish and a black model side by side is immediately noticeable. Our Designix lighting catalogue lets you find the same colour family.
Detection and fixed lighting: how to make them coexist
Reserve detection for what must switch on as you pass: doorstep, driveway, gate. Fixed lighting, meanwhile, takes over for the facade and general ambience. Alternating avoids dark zones between two points and keeps a facade legible in the evening, without lighting all night.
Frequently asked questions about the solar motion sensor wall light
Does a solar outdoor motion sensor wall light give enough light?
It lights a passage area: entrance, landing, around a door. This selection runs at 9 W with a warm white light, between 2700 and 3500 K, enough to find your bearings and secure an access. It is not permanent facade lighting, but supplementary lighting as you pass.
Can you install a solar motion sensor wall light yourself?
Yes. The solar panel is built in and no wiring is needed: you fix the wall light to the wall, aim it towards daylight and let it work. A sound surface and a clear spot, with no mask or foliage, are enough for installation.
What does IP65 mean on a solar outdoor wall light?
IP65 means the wall light is protected against dust and water jets. This is the rating carried by the whole of this selection, which makes it compatible with installation on a facade, under a canopy or on a wall exposed to rain.
Can you install wall lights on an outdoor staircase?
Yes, provided the solar panel stays exposed to daylight. Aim the detection towards the arrival of the steps rather than towards the permanent walkway. The square-shaped, IP65 models in this selection suit an open stairwell or a boundary wall.
Can you adjust the intensity of a solar motion sensor wall light?
Yes, dimming is available on this selection, which lets you match the intensity with the rest of the facade once the wall light is installed. Every reference is also covered by a 2-year warranty, and Designix customer service remains available for installation questions.
Order from Designix
Secure payment, tracked delivery and returns are provided across the whole selection, with Designix customer service to help you choose dimensions and colour. One last check before you confirm: measure the location, make sure the solar panel will stay clear, then choose a single colour for the whole facade.
Discover the gold or black finishes and compose your entrance.
