Solar LED lights
This selection is also available in our French store: Luminaires LED solaires
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A solar LED light installs without a cable: fix the bracket, angle the panel towards the sun, and the light comes on by itself in the evening. Before buying, check three points: the actual sunlight at the location, the IP rating shown on the spec sheet and the mounting method planned for the wall or the ground.
How does a solar LED light work?
A photovoltaic panel recharges a battery during the day, a dusk sensor switches the LED on at nightfall, and a detector can adjust the brightness when someone walks past. No cable to run, no consumer unit to modify: the light goes where the sun reaches, and moves if the spot disappoints.
Outdoor solar LED light: the role of the panel and the battery
This collection has 2 models. The panel captures daylight, the battery releases that energy in the evening: a badly angled panel or a tired battery gives weak light. A complete spec sheet states the battery capacity and the charging method. All our solar LED lights read this way, panel by panel, before you compare shapes.
Outdoor solar LED bulb: the simplest version
The solar bulb applies the same principle in a format that screws in or hangs: a terrace lantern, an outdoor pendant, a hook under a tree. It works as a supplement, not as main lighting. Check the socket and the stated lumen output on the spec sheet, and bear in mind that the small built-in panel needs direct exposure. For a façade lit reliably, the modern outdoor lights with a remote panel are more consistent.
Where should you install an outdoor solar LED light?
Solar suits spots that receive sun for several hours a day: path, gate, exposed façade, terrace, poolside. A spot always in shade, under a deep awning or against a north wall recharges its battery poorly and lights up little. Angle the panel south when the layout allows.
Outdoor solar LED lamp post for a path or a gate
A post light marks the steps without lighting the whole street: placed every three or four metres along a path, it draws a readable route from nightfall. Choose the post height for the effect you want, a low post lights the ground, a taller one carries the light above eye level and limits glare. The garden post models are planted or screwed into the ground, with no trench.
Solar LED lights around the pool
At the water's edge, the light must withstand splashes and cleaning: the IP rating decides, not the looks. A model placed on the ground, low down, lights the coping without sending light into the water or into swimmers' eyes. Poolside lighting works best as several small sources spread out rather than one very powerful point.
Which type of solar LED light should you choose for each use?
The choice depends on the area to light and the installation you accept. A post light paces a path, a wall light or a detector floodlight covers an entrance, a solar bulb is a supplement, a solar ceiling light equips a shelter with no mains supply.
| Type of light | Where to install it | What it brings | What to check on the spec sheet |
|---|---|---|---|
| Solar LED post light | Path, gate, property boundary | Low-level marking, no trench | Post height, ground fixing, panel exposure |
| Wall light or detector floodlight | Façade, entrance, garage | Switches on when someone passes | Detector range, IP rating, orientation |
| Solar LED bulb | Lantern, outdoor pendant | Supplementary light point | Stated lumen output, socket type, charging |
| Self-adhesive solar LED light | Under an awning, a shelter, an outdoor staircase | Installation without drilling | Smooth dry surface, adhesive, weight of the light |
| Ceiling light or solar string lights | Garden shed, pergola, terrace | Ceiling lighting or evening atmosphere | Available daylight, length, IP rating |
Self-adhesive outdoor solar LED lights: which surface
The adhesive holds on a smooth, clean and dry surface: tiles, painted metal, rigid plastic, glass. On bare brick, rough render or powdery plaster it gives way at the first rain, and drilling becomes the only option. This format suits an outdoor staircase or the space under an awning, where you want discreet light without tools. The original design pieces play the same card of detail added without work.
Solar LED ceiling light: lighting a shelter or garage with no mains
A garden shed, a small outbuilding or a detached garage often has no electrical point. A solar ceiling light brings ceiling lighting there, provided its panel, usually remote on a cable, receives daylight outside. That is the only constraint to check before drilling. On colour, an outdoor light in white blends into a pale wall, a green finish disappears among the shrubs.
Which IP rating for outdoor solar lighting?
The IP rating describes protection against dust and water: two digits, the first for solids, the second for water. IP44 covers splashes, IP65 jets. A light exposed to rain and jet washing needs a high rating; under an awning, a more moderate rating is enough. Only the rating printed on the model's spec sheet counts.
Outdoor solar LED lights exposed to rain
A façade wall takes driving rain, wind and frost. An IP65 model handles it without special care, and can be jet washed without worry. At the edge of a pool, splashes are frequent: the same rating applies. The IP65 versions in our catalogue show how to read this rating on a product sheet, useful even for outdoor use.
Covered terrace: is a more moderate rating enough?
Under an awning or a closed pergola, the light only receives spray: IP44 remains consistent, and leaves more choice in shapes. Note, however, that the shelter also blocks daylight: check that the panel can be moved out of the covered area. The IP44 models illustrate this level of protection well.
How long does a solar light stay on at night?
Runtime depends on the energy stored during the day: the more sun the panel receives, the longer the light lasts in the evening. Orientation, shade from a wall or tree, dust on the panel and detector mode clearly change the result. The duration stated by the manufacturer corresponds to ideal conditions, and the model's spec sheet states it.
Solar panel: orientation, shade and dust
A panel tilted south, clear of foliage, charges far better than one lying flat against a north wall. Cleaning with clear water two or three times a year, more often under a pine, restores some of the lost light. In winter, short days and overcast skies reduce charging: that is normal, not a fault.
Detector mode: lighting on movement rather than all night
A detector switches on only on movement and saves the battery for useful moments: this is the setting that best lasts a whole night, and the most discreet for neighbours. A post light on permanent standby drains its reserve faster. On an entrance or a gate, a detector combined with reduced brightness at rest gives the best compromise.
How do you install a solar LED light without an electrician?
A solar light does not connect to the mains: you fix it to the wall, the ground or a bracket, then angle its panel towards the light. Drilling or adhesive depending on the surface, no cable to run, no consumer unit to modify. Test the switch-on the same evening and adjust the orientation if charging seems low.
At what height should you place a solar post light along a path?
High enough that the source is not in your field of view: a post that puts the LED above eye level lights the ground without glare. A low model, around knee height, mainly lights your feet and leaves the rest in shadow. Space the points a few metres apart to avoid pools of light, then step back ten paces at nightfall: you will see at once whether the beam is too narrow.
Self-adhesive solar LED lights: which surface holds?
Degrease the surface, let it dry, stick and hold the pressure for a few seconds. Avoid applying the adhesive in cold weather or on a damp surface. For a slightly heavy light, two screws remain safer than an adhesive strip, especially above a walkway.
Solar LED lights or conventional lights: which to choose for each room?
Solar makes sense outdoors, where running a cable is expensive or damages a wall. Indoors, an LED ceiling light, a chandelier or a wall light connects to the mains: without daylight, a solar battery does not recharge. For a windowless toilet, choose a mains-powered model.
| Location | Solar relevant | Why |
|---|---|---|
| Garden, path, gate | Yes | No cable to bury, well-exposed panel |
| Exposed terrace and façade | Yes | Daily recharge, installation without an electrician |
| Garden shed, detached garage | Yes, well-angled panel | No mains supply, daylight available |
| Living room, dining room, kitchen | No | Covered rooms, continuous lighting expected |
| Bathroom, toilet, poolside | No indoors, yes outside with a high IP rating | Little daylight, water and splashes |
Modern LED ceiling light and LED living room chandelier: indoors stays on mains
A powerful LED ceiling light is chosen on lumen output and colour temperature, neutral white for a living room, warm white for a bedroom, rather than on wattage alone. Check the diameter against the area and whether the brightness can be varied. A chandelier hangs above the table, at seated eye level. See LED living room lighting and the indoor pendants for volumes.
Lights for toilets and powerful LED wall lights: small spaces
A windowless toilet has no daylight: solar does not recharge there. A compact mains-connected ceiling light is enough, the area is small. To change a recessed spotlight, switch off the power, remove the trim ring, disconnect the terminal block and fit a model with the same cut-out diameter and the same colour temperature. The toilet lights and the recessed ceiling spotlights give the diameter references.
Where can you see solar LED lights before buying?
A showroom lets you judge the real size, the finish and the light output. Online, the spec sheet gives the dimensions, the material, the IP rating and the mounting method. Compare this information before choosing, and check that the panel will be exposed enough at the planned spot.
Original lights: what sets a well-made solar model apart
The difference lies in details you cannot see in a lifestyle photo: a panel remote on a cable for better capture, a replaceable battery, an accessible switch, a finish treated against UV. A model with the panel fixed to the body forces you to angle the whole light towards the sun, which sometimes harms the beam. Look at the black wood versions to match a dark façade.
Lighting shop in Lyon or online store: where to read the spec sheet?
Searches such as lighting shop Lyon or lighting clearance Lyon often lead to local stores, useful for touching a model. What decides remains the spec sheet: height, material, IP rating, mounting method, required panel exposure. The Designix catalogue presents this information model by model, available without travelling. A lighting shop in Lyon helps to compare volumes; an online store saves the trip when only the specs matter.
Hesitating between a path post light and a façade floodlight? Start from the area to cover, then check the sunlight at the location: that is what decides the format. A post light lights a path from above, a floodlight covers a façade; in both cases, the panel must stay exposed to daylight.
Frequently asked questions about solar LED lights
Is an outdoor solar LED bulb enough to light an entrance?
An outdoor solar bulb gives supplementary lighting: it depends on the charge built up by its small panel during the day. For a busy entrance or an area that is always dark, a mains-connected detector light remains more consistent. Read the stated lumen output on the spec sheet.
Outdoor solar LED post light: how do you choose one?
Look at the post height to avoid glare, the beam width, the ground fixing and above all the panel exposure. Along a path, the post light lights the steps; at a property boundary, it marks the edge without lighting the neighbours. The spec sheet gives height, material and IP rating.
LED living room chandelier: why does it stay on mains?
A chandelier hangs from the ceiling, indoors: it has no access to the daylight needed to recharge a solar battery. It therefore connects to the mains, with brightness that is often dimmable. Solar is reserved for façades, terraces, paths and poolside, and the modern dining room follows the same rule.
What does the IP rating mean on a solar light?
The IP rating indicates protection against solids and water: the first digit concerns dust, the second water. IP44 corresponds to splashes, IP65 to jets. Choose according to the light's actual exposure and check the rating printed on the model's spec sheet.
Does a solar light stay on all night in winter?
In winter, short days and overcast skies charge the battery less: lighting often lasts less long than in summer. Angle the panel south, clean it, and bring movable models inside if frost is forecast. The manufacturer's duration corresponds to ideal conditions.





