Smoked glass floor lamps
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?
An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
One floor lamp per living zone, not two: a single one is enough to anchor the corner of a living room, the reading nook of a bedroom or the end of a desk. Smoked glass veils the light without extinguishing it, and this selection covers all three rooms, from E27 sockets to integrated LED modules.
What light does a smoked glass floor lamp give?
Smoked glass filters the light without extinguishing it: it veils it, reduces glare and lets through a warm, even halo. Depending on the model, the bulb screws in as E27 up to 40 W, or the lighting is an integrated LED module of 10, 18 or 20 W, in warm white.
What light for a living room?
Smoked glass works as a tinted veil: the source stays visible, but its bright point disappears. You get ambient light rather than task lighting, comfortable late in the evening. This is why glass is preferred to opal when you want to keep a reflection.
E27 bulb or integrated LED module?
Two families coexist. Models with an E27 socket, the most common, take a bulb up to 40 W: you choose the temperature, around 2700 to 3500 K for a warm white. Models with an integrated LED module deliver 10, 18 or 20 W and need no bulb changes. All are IP20, so indoor use only.
To compare the results, start with the LED versions for the living room, which show what tinted glass lit by a module looks like, then browse all the home lighting to place smoked glass among the other materials.
Where to place a smoked glass floor lamp in the home?
The three living spaces in this selection are the living room, the bedroom and the office: each model suits all three. In a living room, it goes next to the sofa; in a bedroom, in the corner or near an armchair; in an office, beside the desk.
Next to the sofa, in the living room
Place it within reach of the seat, to light reading or a corner without switching on the ceiling light. A single fixture anchors the zone; adding a second in the same spot creates two competing sources. The glass floor lamps for the living room gather the formats suited to this placement.
In the corner of a bedroom or office
In a bedroom, the free corner near an armchair replaces a bulky bedside lamp. In an office, place it at the end of the desk, slightly set back: the LED office lighting suits desks where you stay for long stretches. The Cuprea with its adjustable head, a 10 W LED module with dimmer, stops at 141 cm high, so it fits under a shelf.
White or black smoked glass floor lamps: which version to choose?
Smoked stays smoked: what changes is the colour of the base and frame. A light structure, white, silver or gold, brightens the whole; a black or bronze frame makes it more graphic. Smoked glass also pairs with clear or amber glass on some models.
White smoked glass floor lamps
A white, silver or gold frame lightens the floor lamp and sits well against a pale wall. The light and modern models play on this register, while the black and white two-tone floor lamps bring contrast within a single base.
Black smoked glass floor lamps
A black or bronze structure makes the glass almost monochrome and more graphic. Look at the bold black pieces and the black metal frames. On a dark floor, also compare the black glass and wood, which warms up the result.
And the clear or amber versions?
Smoked is not exclusive: several models combine clear, smoked and amber glass on a single base, with a gradient of tones once lit. For warm finishes, look at the gold structures and the gold design floor lamps.
How to choose between a ball, a globe or a ribbed glass base?
The shape decides the type of light. A globe or ball spreads a broad halo around the glass; a cylindrical shade concentrates light downwards; ribbed glass on a travertine base softens it and spreads it over the wall. A tripod, for its part, leaves the floor visible.
Ball, globe or tripod
The globe and the ball light all around them, with no marked direction: handy for general ambience. The tripod clears the floor, so the room looks less cluttered. The Orb Axis tripod globe, glass and metal, 160 cm, E27 socket up to 40 W with dimmer, illustrates this format.
Cylindrical shade or ribbed glass on travertine
A cylindrical shade directs light downwards and to the sides: more effective for reading. Ribbed glass, in turn, throws softened light onto the wall and lights the room without glare. See the Echos in travertine and ribbed glass, 180 cm, E27 socket up to 40 W, and the glass with a worked pattern.
| Shape | Dominant material | Type of light | Where it finds its place |
|---|---|---|---|
| Ball | glass and metal | diffuse halo spread around the globe | living room, bedroom, office |
| Globe on tripod | glass and metal | broad light upwards and to the sides | next to a sofa or an armchair |
| Cylindrical shade | glass, brass, metal, iron | light directed downwards and to the sides | back of a living room, office corner |
| Ribbed glass on travertine base | glass, metal, stone | light softened by the ribs | bedroom or living room, along a wall |
| Multiple globes | metal and glass | several G9 light points | a room to stage |
Which socket and bulb for a smoked glass floor lamp?
Most models take an E27 bulb, up to 40 W; others carry an integrated LED module of 10, 18 or 20 W, and one model with multiple globes uses 3 W G9 bulbs. Part of the selection accepts a dimmer.
Screw-in E27 bulb
The E27 socket leaves the choice of bulb open. To get a warm result behind tinted glass, stay around 2700 to 3500 K. A filament bulb gives a visible point of light in the glass, an opaque bulb does not: that is a rendering criterion, not a power one.
Integrated LED module and G9 bulbs
Integrated LED modules of 10, 18 or 20 W remove the bulb and keep the same temperature throughout the life of the product. The Fumato and its tiered shades works this way, with an 18 W module. On models with multiple globes, they are 3 W G9 bulbs. To widen your search, see the modern line LED floor lamps.
| Socket | Wattage found | Bulb type | Dimmer |
|---|---|---|---|
| E27 | up to 40 W | screw-in bulb, chosen for the desired result | possible on some models |
| Integrated LED | 10 W, 18 W or 20 W | LED module, nothing to screw in | possible on some models |
| G9 | 3 W | G9 bulb for models with multiple globes | not mentioned |
Which height of smoked glass floor lamp to choose per room?
The heights found range from about 141 to 193 cm, which places the shade above a seat or a desk. Near a sofa or an armchair, aim for the top of that range; in a small office, the lowest models fit better.
Heights found in the collection
Travertine and ribbed glass bases sit between 174 and 193 cm depending on the model, tripod globes around 160 to 180 cm, and reading models go down to 141 cm. A tall height suits a large room or a high ceiling, a lower height suits a narrow space where the glass should stay in your field of vision when seated.
Positioning the shade relative to the seat
The rule is simple: the bottom of the shade should sit above the seat, never at eye level when you are sitting. At a desk, the top of the base stays visible, which keeps the source out of your line of sight. The glass floor lamps for the living room cover both cases.
Floor lamp, wall light and bedside lamp in glass: how to match the glass?
A smoked glass floor lamp pairs with a ball or tube glass wall light when you keep the same family of tones, smoked, amber or clear. For a bedside lamp, a smoked or ribbed glass shade echoes the pattern without imposing it. One strong piece per zone is enough.
Ball or tube glass wall light
A ball or tube glass wall light fixes the lighting to the wall and frees the floor; the floor lamp, meanwhile, moves and lights lower down. The two can coexist if the glass stays close, in the same family of tones and with no more than two glass pieces per room. The gold design floor lamps give a coherent base for this kind of pairing.
Glass shade for a bedside lamp
Choose the shade in the same family of tones as the floor lamp, smoked, amber or clear. A ribbed shade softens the light and avoids the overly bright point of smooth glass lit up close. On a bedside table, this replaces ceiling lighting.
Restyling a glass table
You keep the top and change what surrounds it: a rug with clean edges, a large vase, a smoked glass floor lamp at the end of the table, which talks to the transparency. Covering the top with wood weighs the room down; better to keep the glass and play on contrast, a placemat or a wooden tray is enough to warm up the whole.
How to set up and care for a smoked glass floor lamp?
All the models in the selection are IP20: they are meant for indoor use, away from moisture. Set the base on a stable floor, clear the cable and wipe the glass with a soft, lint-free cloth, without abrasive products. Smoked glass shows fingerprints.
Positioning and securing the base
A base of 160 to 193 cm needs a level floor and a cable that does not cross a walkway. Keep the floor lamp away from traffic areas and check that the base stays stable once the bulb is in. The two-year warranty covers most models in the selection, and three years on some of them.
Cleaning smoked glass without streaks
Unplug before any work. Wipe the glass with a soft, slightly damp cloth; avoid abrasive products and alcohol, which mark metal and brass finishes. A Solane with amber cylindrical shade, in brass and glass, handles this gentle cleaning but not hard rubbing. For a very mineral interior, compare with the floor lamps with a light design.
Frequently asked questions about smoked glass floor lamps
Which bulb should go in a smoked glass floor lamp?
It all depends on the model's socket: E27 up to 40 W, an integrated LED module of 10, 18 or 20 W, or 3 W G9 on models with multiple globes. To get a warm result behind smoked glass, look for a warm white around 2700 to 3500 K.
White smoked glass floor lamps: what is the difference with black smoked?
It is the frame that changes, not the glass: a white, silver or gold structure brightens the floor lamp, while a black or bronze frame makes it more graphic. At equal light, the choice comes down to the style of the room and the tones of the furniture.
Ball glass wall light or floor lamp: which to choose?
A ball or tube glass wall light fixes the lighting to the wall and frees the floor; a smoked glass floor lamp moves and lights lower down, near a seat or a desk. In the same room, you can pair the two if the glass stays close.
Can a smoked glass floor lamp be installed outdoors?
No. All the models in the collection are IP20, a rating that corresponds to indoor use, away from water splashes. A floor lamp to place outside must carry a higher protection rating, suited to rain and moisture.
How do you clean the smoked glass of a floor lamp?
Unplug the floor lamp, then wipe the glass with a soft, lint-free, slightly damp cloth. Avoid abrasive products and alcohol, which mark metal and brass finishes. Smoked glass reveals marks: regular cleaning is better than hard scrubbing.
One last landmark before choosing: height and socket are decided before style. The Orb Axis tripod globe and the Echos in travertine cover two different uses, broad ambience and softened light on the wall. Secure payment, tracked delivery, returns and Designix customer service: you order, you try it at home, and you adjust if the room calls for another tone.
