Smart bedside lamp

Set the brightness as low as possible and the colour temperature around 2700 K in the evening: that is what makes a smart bedside lamp pleasant at bedtime. Control, by app, remote or voice command depending on the model, comes next, to switch off without getting up and find the same light the next day.

Contents

• What light does a smart bedside lamp give
• Choosing according to use and control
• Matching the lamp to the bedroom style
• Where to place it in the bedroom
• Connection and network preparation
• Everyday care
• Completing the lighting of the bedroom and living room
• Frequently asked questions

What is a smart bedside lamp and what light does it give?

A smart bedside lamp is a bedside lamp whose switching on, brightness or colour is adjusted remotely, by app, remote or voice command depending on the model. At the bedside, it is mainly used to read, to create a soft light in the evening and to switch off without getting up. The light it gives must stay comfortable, without glare.

What control changes at bedtime

Remote switch-off saves getting up again, scheduling acts as a gentle wake-up call, dimming lets you move from reading light to nightlight glow. These functions are judged in use: a control that needs four screens to switch off will be abandoned after three evenings. Connectivity does not replace light quality, it accompanies it. A lamp whose switch stays within reach in the dark is more useful than a model overloaded with settings. The full lighting catalogue shows very different approaches on this point.

Warm white or reading light: which atmosphere at the bedside

Around 2700 K, the light leans towards amber and accompanies the end of the evening. Between 3000 and 4000 K, the rendering becomes clearer, more comfortable for reading without tiring the eyes. Many bedside lamps accept an E14 or E27 bulb, others include a non-replaceable LED: this is a criterion to check before buying. For a lamp placed on a bedside table, an IP20 rating is enough, as it stays protected from water splashes. Not all bedside lamps are equal on this lighting ground.

How to choose a smart bedside lamp for your bedroom?

Start from the use: reading in bed calls for a directional and fairly clear light, while ambient light favours low brightness. Then check the control offered, the power supply, the footprint on the bedside table and the material. A smart lamp must stay simple to use every day, even without a phone within reach.

Control by app, remote or voice command

Control is chosen like an everyday gesture, not like a technical sheet. If you often fall asleep reading, the app or remote settles the question of switching off. If your hands are busy, voice control via a compatible assistant is useful, when the model provides it. A model with a rechargeable battery moves from bed to desk without unplugging.

Format, material and place on the bedside table

Measure the bedside table before choosing: a 35 to 40 cm wide top supports a wide base, a narrow shelf calls for a small shade diameter or a slim weighted base. The material matters as much as the rest, because black metal blends into a sober decor while wood warms a bright bedroom. LED bedside lamps suit this use well, and a small format for a bedside table solves narrow bedrooms. To broaden the comparison, the lamp family also covers desk models, including the classic table lamp.

How to match a smart bedside lamp to the bedroom style?

Style is played out in the material, shape and colour of the lamp, not just in the fact that it is smart. A black metal bedside lamp stays discreet, wood warms a bright bedroom, glass lightens a bedside table. A heavily decorated room better tolerates an original lamp, while a sober bedroom calls for a simple design.

Italian design, modern or original bedside lamp: what to look at?

Italian design is recognised by clean lines and careful work on material, often on a slim stem and a well-proportioned diffuser. A modern bedside lamp fits more easily into a contemporary interior, with bold shapes and little ornament. The original one plays on colour or silhouette, sometimes right up to a hot-air balloon shape, and needs a room that is not already shouting. In all three cases, check the stability of the base and the position of the switch. Lamps with elaborate design and modern bedside models illustrate these two directions well.

Colour and material: black, wood, glass or rattan

A black bedside lamp structures a bright bedroom and matches the metal of the bedding. The warmth of wood works on white walls as well as on linen tones. Glass bedside lamps let light through and visually disappear on a cluttered bedside table. In terms of colour, a turquoise or pink bedside lamp becomes the accent point of a neutral room, provided it remains the only strong note. An original bedside lamp is chosen last, once the rest of the bedroom is set.

Where to install a smart bedside lamp in the bedroom?

The lamp is placed at mattress height, on the bed side, with a beam that lights the book without reaching the other person's eyes. On a bedside table, allow room for the book and the glass of water. Without a table, a wall lamp or a small table lamp frees the floor and the passage.

On a bedside table: height and clearance

Generally, the bottom of the shade sits roughly at mattress level or slightly above, to light without glare when sitting. Leave clearance around the base to put down a book, and move the lamp away from the edge if you get up at night. Also check access to the socket: a badly plugged-in smart lamp loses all its interest. A versatile table lamp can change sides as needed.

Without a bedside table: wall lamp or small format

In a narrow bedroom, a wall light or wall lamp fixed above the bed base replaces the bedside table and leaves the floor free. The small format placed on a shelf also works, provided the beam is directed downwards. For a child's bedroom, a soft nightlight and accessible controls are enough. A lamp to equip a bedroom is always chosen according to the real space, not the catalogue photo.

How to connect and install a smart bedside lamp?

Plug the lamp into an accessible socket and follow the manufacturer's instructions for the power supply. For several lamps on a single electrical supply, use a solution intended for this use and do not exceed the power indicated on the circuit. Before first use, prepare the Wi-Fi network and the required app.

How to connect several lamps to a single electrical supply

Two bedside lamps can share the same wall socket via a power strip, if the total wattage of the bulbs stays within the limits indicated on the block and on the circuit. Avoid stacking extension leads and do not run a cable under the mattress. As soon as a socket needs to be moved or the wiring modified, an electrician steps in: this is not a DIY job. A vintage-style bedside lamp with a switch on the cord is connected in the same way as a recent model.

Preparing the Wi-Fi and the app before the first switch-on

Bring the lamp close to the box during pairing, then put it back in place once pairing is complete. Keep the network code within reach and note the app password. Voice control, when the model provides it, is set up after pairing, in the settings of the compatible assistant. A badly paired smart LED blinks for no reason: in that case, redo the procedure from the start rather than multiplying attempts.

How to care for a smart bedside lamp every day?

Unplug the lamp before cleaning it. Dust the shade and the base with a soft cloth, without wetting the electrical part, the plugs or the controls. Let the electronics breathe and avoid placing objects on the lamp. A stable connection is maintained by keeping the app up to date and bringing the lamp closer to the box if needed.

Cleaning without wetting the electronics

A slightly damp microfibre cloth is enough on the base, then a dry cloth to finish. Glass is cleaned with glass cleaner applied to the cloth, never sprayed on the lamp. On a rattan or textile lamp, gentle brushing and a vacuum cleaner on minimum power prevent the weave from loosening. Wait until everything is dry before plugging back in.

Keeping a stable connection without multiplying settings

A lamp that no longer responds is often fixed by unplugging it for ten seconds, then plugging it back in. Update the app when it offers to, and avoid creating several competing schedules. If the lamp is at the other end of the bedroom, moving it a few dozen centimetres towards the box may be enough. A driftwood bedside lamp is cleaned and plugged back in in exactly the same way.

Which other lamps can complete the lighting of the bedroom and living room?

A smart bedside lamp does not always replace the living room's accent lighting. A floor lamp brings high light near an armchair, a table lamp lights a reading corner, and a driftwood or rattan bedside lamp warms a bedroom. Choose each lamp for its place and its use, not to accumulate models.

Floor lamp in the living room: when to add it

A floor lamp takes over when the ceiling light stays off in the evening: it raises the source to shoulder height and lights an armchair without crossing the room. In a living room, generally count two to three light points at different heights to avoid flat lighting. A smart living room lamp integrates with the same control as the bedside lamp, which avoids hunting for three switches. The most beautiful living room lamps are chosen first for their silhouette, then for their light.

Driftwood bedside lamp and natural materials

Driftwood, rattan and linen give a filtered light, softer than an opaque shade, and suit a bedroom where you want to lower the brightness in the evening. These materials require regular dusting, as the fibres hold dust. A wooden lamp matches light furniture, a rattan bedside lamp suits a more natural decor. For an even softer result, look at the golden bedside lamps, which reflect light without darkening it.

To compare the shapes, materials and controls available, browse our lighting and the bedside section. Secure payment, tracked delivery, returns and Designix customer service accompany every order.

Frequently asked questions