Wireless rechargeable LED light bars

This selection is also available in our French store: Réglettes LED rechargeables sans fil

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
Wireless rechargeable LED light bars
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

First measure the length of the area you want to light, then choose the colour temperature and the switching mode: a battery-powered batten, recharged by USB cable, fixed with a magnet or adhesive, with no plug and no chasing into the wall. The rechargeable LED batten lights a worktop, a cupboard or a shelf, and moves whenever your needs change.

What is a wireless rechargeable LED batten and what light does it give?

A wireless rechargeable LED batten runs on a built-in battery, recharged by a USB cable: no mains connection, no socket nearby, no cable to run. It lights in white, with a warm or more neutral tone depending on the model, and fixes under a shelf, under a cabinet or inside a cupboard.

Wireless LED batten with rechargeable battery: how it works

The LEDs, the battery and the control module fit inside a slim profile, often aluminium or ABS plastic. Since nothing connects the batten to the mains, you choose the location for the light and not for the socket: that is the whole point of the wireless rechargeable range. When the area stays fixed and a power supply exists, a mains-powered 220V batten saves you the recharging.

Which light colour for which use

Warm white, around 2700 to 3000 K, suits bedrooms, headboards and wardrobe cupboards: it does not wash out colours. Neutral white, around 4000 K, makes food and worktops easier to read. These are industry standards, to be checked on each model: the rest of the lighting catalogue follows the same logic of colour temperature.

Which length and format of wireless LED batten should you choose?

Choose the length by measuring the area to be lit, not by taking the longest batten available: shorter than the worktop, it leaves dark zones at the ends. The slim format slips under a wall cabinet without being seen; thicker, it is less noticeable inside a closed cupboard.

Length and bulk: measure before ordering

Measure the usable width of the worktop or shelf, then take off a few centimetres so the batten stays in the shadow of the cabinet. Thickness matters as much as length: under a wall cabinet, a flat profile goes unnoticed, whereas a round model shows as soon as you sit down. The table below sums up the common cases, to be cross-checked with all the LED battens.

Light points and intensity: what it changes day to day

A batten with more light points spreads the light more evenly and removes patchy shadows. Adjustable intensity is useful when the same batten lights a worktop by day and serves as a night light in the evening. On supplier data, trust the wattage and the length, more reliable than inconsistent advertised lumen outputs.

Which wireless LED batten for which room
Room or use What is lit Decisive criterion Recommended fixing
Kitchen, under wall cabinet Worktop Length covering the worktop, manual switch or sensor Magnet or adhesive, no drilling
Cupboard, wardrobe Shelves, hanging rail Motion detection on opening Adhesive or magnetic plate
Staircase, hallway Passage, steps Motion detection, battery life Adhesive on a smooth surface
Bathroom Mirror, vanity unit Ingress protection suited to humidity Outside the water splash zone
Garage, workshop Workbench, storage Length, dust resistance Mechanical or magnetic fixing
Sheltered outdoor Covered terrace, entrance IP65 waterproofing Sheltered from direct rain

Where to install a wireless rechargeable LED batten in the home?

Under a kitchen cabinet, in a cupboard, along a shelf, in a hallway or on a staircase: the wireless batten is useful wherever running a cable would be too complicated. In a bathroom or outdoors, you must check the ingress protection rating before choosing.

Under kitchen cabinets and inside cupboards

In a kitchen, the batten goes under the wall cabinet, set back from the edge, to light the worktop without dazzling whoever is preparing food. In a wardrobe, switching on when the door opens changes everything: no more holding a lamp in one hand. Bathroom battens follow another requirement, that of humidity.

Staircases, hallways and bathrooms: check the ingress protection rating

A staircase or hallway needs little light but in the right place: at step level or along the handrail. In a wet room, the IP rating indicates protection against humidity and splashes; stay outside the direct water zone. For a utility room or a shelter, models designed for the garage resist dust better.

Wireless rechargeable LED batten with motion sensor: for which use?

The motion sensor switches the batten on as you pass and off after a period of inactivity: handy on a staircase, in a hallway or in a cupboard you open with your hands full. A manual switch or a remote control is better when you want to keep the light on for a long time.

Motion detection or manual switching

Detection does the job when your hands are busy: you open, it lights, you close, it goes off. Its limit is the timer, which cuts the light while you are still in front of it. A button on the batten stays simpler for a long session, for example while cooking. Motion sensor models cover most hallways and cupboards.

Remote control and dimming: extra comfort

A remote control lets you vary the intensity and the colour temperature without touching a batten fixed up high. It adds a battery to watch and an object to store. If you prefer fixed control and a continuous power supply, mains-powered motion detection removes the question of recharging.

How to fix a wireless LED batten without drilling?

Most wireless battens fix without drilling: a magnetic plate glued to the surface, or an adhesive strip placed on the back of the profile. The surface must be clean, dry and smooth, otherwise the adhesive gives way and the batten falls.

Magnetic fixing or self-adhesive strip

The magnetic plate has one advantage: the batten comes off to recharge or to change place, then goes back in one movement. The self-adhesive strip holds well on tiles, glass or a lacquered cabinet, less well on painted plaster or bare wood. Choose the fixing according to the surface, not according to the look of the mount.

Prepare and degrease the surface before sticking

Clean, dry, then press the adhesive for a good thirty seconds before placing the batten on it. Avoid dusty, greasy or textured walls. When ordering, secure payment, tracked delivery, returns and Designix customer service remain your points of contact if a fixing accessory is missing.

How long does a wireless LED batten with rechargeable battery last?

Battery life depends on the length of the batten, the intensity chosen and the switching mode: motion detection triggered constantly drains the battery faster than a brief switch-on. Recharging is done by USB cable, usually without removing the batten from its mount.

What makes real battery life vary

A short, low-intensity batten lasts longer than a long model pushed to maximum. How often it switches on weighs just as much: in a busy hallway, detection triggers non-stop. No duration can be stated without knowing the exact model and the use, so be wary of overly generous figures.

Recharging and caring for the battery

Recharge before the batten goes into prolonged standby, and avoid leaving it flat for months in a cupboard. A standard USB cable is enough in most cases; keep it within reach of the cabinet. Compare the formats on wireless battery-powered battens before deciding.

Wireless LED batten or LED strip: which to choose?

The rechargeable batten suits occasional, movable lighting: cupboard, under-cabinet, headboard. The mains-powered LED strip is used for a long continuous line, but it needs a power supply, cutting at the marks and sometimes soldering for the connections.

Connecting an LED strip without a connector, how to do it?

You have to join the copper pads of the strip to those of the power supply by soldering, or use a terminal block designed for this type of strip. Identify positive and negative before connecting, then insulate the contacts to avoid a short circuit. This step explains why the strip remains a permanent installation.

Cuttable LED strip: how does it work?

The strip has regular cut marks and can only be cut at those marks: elsewhere, the circuit is broken and that section no longer lights. On a waterproof model, the cut is closed again with a suitable end cap. The batten, for its part, cannot be cut: its length is chosen when you order.

Rechargeable LED batten or mains-powered LED strip
Criterion Wireless rechargeable batten Mains-powered LED strip
Power supply Battery recharged by USB Transformer connected to 220V
Installation Magnet or adhesive, movable Adhesive or profile, permanent installation
Length Short to medium format Long length in a continuous line
Cutting and connection Not applicable Cut at the marks, connected by soldering or connector
Maintenance Regular battery recharging Fixed power supply, no recharging

Which wireless LED batten for outdoors, the garage or the workshop?

In a garage, workshop, covered terrace or entrance, the wireless batten helps out where there is no socket. You then need to look at the IP ingress protection rating and dust resistance: an indoor model will not survive humidity or splashes.

IP65 and waterproofing: what it really protects against

The two digits of the IP rating are read separately: the first covers solids, the second water. An IP20 fears dust and drips; an IP44 withstands splashes; an IP65 resists jets and dust. Cross-check this criterion with the IP65 references and the waterproof models before choosing.

Outdoors: the limits of a wireless rechargeable batten

Outside, the battery suffers from the cold and recharging becomes a chore. A covered terrace or a porch remains a reasonable use; a facade exposed to rain, no. For a workshop, favour length and a solid fixing, with workshop lighting, and for outdoors, compare outdoor battens then the waterproof outdoor versions.

One last check before ordering: measure, check the IP rating and choose the switching mode. Secure payment, tracked delivery, returns and Designix customer service accompany the order, and the rest of the Designix lighting range lets you complete the lighting of a room.

Frequently asked questions about wireless rechargeable LED battens

What is a wireless rechargeable LED batten?

It is an LED light batten with a built-in battery, recharged by a USB cable, that needs no socket or mains connection while it is running. It fixes with a magnet or adhesive and is used to light a cupboard, a worktop or a shelf.

How long does a wireless LED batten with rechargeable battery last?

It varies with the length of the batten, the intensity chosen and the switching mode: repeated motion detection uses more than a short switch-on. Recharging is done by USB, often without removing the batten. No duration can be stated without knowing the exact model.

Where to place wireless LED battens in the home?

Under the wall cabinets of a kitchen, in a cupboard or wardrobe, on a shelf, along a staircase or in a hallway without a socket. For a bathroom or a sheltered outdoor area, choose an ingress protection rating suited to humidity.

How to fix a wireless LED batten without drilling?

Clean and dry the surface, then stick the magnetic plate or the adhesive strip supplied. Place the batten on its mount once the adhesive has been pressed. Avoid dusty, greasy or textured walls, where the adhesive holds poorly.

Is a wireless rechargeable LED batten suitable for the bathroom or outdoors?

Only if its ingress protection rating is suitable: an indoor model fears humidity and splashes. In a bathroom, place it outside the direct water zone; outdoors, a covered terrace is safer than a facade exposed to rain.

Our advice for choosing
Rechargeable wireless LED strip lights illuminate a worktop, a cupboard or a shelf: the battery recharges via USB, and the module attaches with a magnet or adhesive. Choose by length, light colour and whether a motion sensor is included.