USB rechargeable LED strip light
This selection is also available in our French store: Réglette LED rechargeable usb
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Allow around 40 cm of strip for a cupboard or a shelf, and around 60 cm for a worktop or a wide workbench: it is the area to be lit that sets the length, not the wish to have more light. A rechargeable LED strip light fixes without a socket or an electrician, recharges by USB cable and serves as supplementary lighting, never as main lighting.
What is a rechargeable LED strip light and what is it for?
A rechargeable LED strip light is a self-contained light strip: a battery, a strip of LEDs, a diffuser, and a USB port for charging. No mains connection, so no channelling, no cable to run. You fix it under a shelf, in a cupboard or above a worktop, and switch it on when you need it.
Rechargeable LED strip light: what happens when you switch it on
The diffuser, the part that covers the LEDs, turns a point light into an even sheet of light: you do not see the light points and you do not get the glare in your eyes when you work underneath. That is what sets a strip light apart from a bare strip. On a worktop, this light without direct glare changes everything when you peel vegetables or read instructions.
Rechargeable LED spot or strip light: what is the difference?
A spot concentrates light in a narrow cone: handy for lighting the inside of a cupboard or the back of a drawer. A strip light covers a longer line, so a work surface. A rechargeable LED spot moves in your hand, a strip light is fixed. Compare the two formats in our selection of rechargeable strip lights and in the LED strip light family before deciding.
Where to install a wireless rechargeable LED strip light?
With no wire or socket, a rechargeable strip light goes where the electrical network does not reach: under the wall units of a kitchen, in a cupboard, above a workbench, in a garage or an office. It lights up for the duration of a task, then recharges elsewhere. That is its real strength: freedom of placement.
Wireless LED kitchen strip light: under-cabinet and worktop
Under the wall units, directly above the worktop and set back from the edge so as not to shine in your eyes, the strip light takes over from a ceiling light that puts you in the shadow of your hands. It also helps under a extractor hood or in a blind spot. For permanent task lighting, see instead 220V LED strip lights.
Cupboard, workshop, garage: the uses of wireless
In a cupboard with no socket, the strip light comes on just long enough to choose a garment. On a DIY bench, a workshop strip light helps in a dark corner, and a garage strip light is useful near a shelf or a door. A wall strip light fixed high up keeps the worktop clear, and for larger rooms, our lighting catalogue offers wired solutions.
How to choose the length: rechargeable LED strip light 40 cm or 60 cm?
The length is chosen based on the area to be lit: around 40 cm for a cupboard, a shelf or a low unit, around 60 cm for a worktop or a wide shelf. The longer the strip light, the better the light spreads, but the more the installation needs a straight, clear surface.
| Format | Where it fits | Typical use | What to check |
|---|---|---|---|
| Around 40 cm | Cupboard, shelf, low unit | Targeted lighting of a narrow area | Straight, clear surface, access to the USB port |
| Around 60 cm | Worktop, workbench, wide shelf | Lighting of a longer surface | Light distribution, weight on the adhesive |
| With motion sensor | Hallway, cellar, cupboard without a switch | Switches on when you pass | Range, delay, false triggers |
Rechargeable LED strip light short format (around 40 cm) with motion sensor
The short format slips into a 60 cm wide cupboard without overhanging, and moves from one shelf to another. The IP40 rating means protected against solid objects, but not against water: it is a dry-room model, not to be placed near a sink. In a damp room, a higher rating is needed, and IP65 models are made for that.
Rechargeable LED strip light long format (around 60 cm) with motion sensor
On a kitchen splashback or a workbench, the long format covers more and gives a more even light across the width of the surface. Allow for a very flat surface: over 60 cm, an adhesive strip applied crooked comes off faster. The sensor saves you from having wet or dirty hands to switch on, a real comfort, and you can cross-check with motion sensor models.
How does a wireless rechargeable LED strip light with motion sensor work?
The sensor detects movement and switches the strip light on without a switch, then off after a delay. On a rechargeable strip light, it runs on battery, which avoids any wiring: handy in a hallway, a cupboard or a cellar. The range and the switch-off time vary from one model to another.
Range, delay and false triggers
An infrared sensor reacts to the heat of a moving body: so it needs a clear line of sight. A glass door, a radiator or a draught of warm air can trigger it wrongly. The shorter the delay, the longer the battery lasts, but the more you risk being left in the dark mid-task. Test the setting before fixing.
Battery sensor or 220V sensor: which to choose?
On battery, you place the strip light anywhere and recharge it elsewhere: perfect for a cupboard or a cellar. In 220V, the sensor works continuously without recharging, which suits a busy hallway. Compare a mains motion sensor with the rechargeable versions before choosing.
How to fix a rechargeable LED strip light: magnet, adhesive or screws?
Three solutions exist: the magnetic mount, the adhesive strip and the screw. The magnet moves and comes off without a trace, the adhesive holds on a smooth, clean surface, the screw remains the only option on an uneven wall or in a passageway. Check the surface before choosing.
Rechargeable magnetic LED light: the magnetic mount
A rechargeable magnetic LED light comes off with one hand to go on the charger, then goes back on. It is the most flexible installation, provided you have a metal surface or the supplied plate. Ideal in a garage or on a workshop trolley.
Adhesive and screws: what to check before drilling
Adhesive does not forgive dust, grease or peeling paint: degrease, dry, then stick. Screws require locating a stud or an anchor point suited to plasterboard. In both cases, place the strip light dry first, check the alignment and access to the USB port, and only then fix it.
How to recharge and maintain a rechargeable LED strip light?
A USB strip light recharges on a phone charger, a computer or a power bank. To make it last, avoid leaving it charging permanently, use the supplied cable and do not force the port. A wipe with a dry cloth is enough to keep the diffuser bright.
Battery, cable and plug: the right habits
A quality USB cable and a standard charger are enough: no need to look for maximum power. Always plug the connector in the right way, without forcing, and unplug once charging is complete. A damaged port makes the strip light unusable, even with a battery in good condition.
Battery life: what makes it vary
Battery life depends on the lighting mode chosen, the length of the strip, whether the sensor is activated and the age of the battery. No universal figure applies. In practice, a strip light works in short sessions, a few minutes under a cupboard: that is where it is most effective.
Rechargeable strip light, LED tape or 220V strip light: which to choose?
The rechargeable strip light installs without work but must be recharged; adhesive LED tape installs over long lengths and can be cut, but stays fixed; the 220V strip light lights continuously and withstands humidity in the sealed version. The choice depends on the socket, the duration of use and the surface.
| Criterion | Rechargeable USB strip light | Adhesive LED tape | 220V LED strip light |
|---|---|---|---|
| Power supply | Battery, recharged by USB cable | Mains via transformer | Connected to the mains |
| Installation | No cable, no electrician | Adhesive, over a length | Fixing and connection |
| Lighting duration | Limited by the battery | Continuous | Continuous |
| Humidity | Dry room only | Depending on the model | Sealed versions available |
| Ideal for | Cupboard, worktop, occasional use | Long fixed line of light | Main lighting, workshop, damp room |
Cuttable LED tape: how does it work?
An LED tape is cut at the marks on the strip, then connected with a connector. A strip light, on the other hand, cannot be cut: its length is set by the housing and its electronics. If the exact length is your constraint, compare the two formats before buying.
When to move to a 220V LED strip light
As soon as you need to light for several hours a day, or in a damp room, recharging becomes a constraint. Move to mains power, in a protected version for a utility room, a garage or a sheltered outdoor area: see sealed strip lights and, for outdoors, outdoor lighting.
What mistakes to avoid with a rechargeable LED strip light?
The classic mistakes: choosing a strip light too short for the area, placing it in a damp spot without protection, relying on it as main lighting, or sticking the adhesive on a dusty wall. A dry run, before fixing, avoids most disappointments.
Choosing too short for the area to be lit
Measure the width of the worktop or the shelf before choosing: a strip light that is too short leaves two zones in shadow, at the ends, and makes you lean your head to see what you are doing. Better to choose a slightly longer format, provided the surface allows it.
Relying on a battery like main lighting
A rechargeable strip light helps out, it does not light a whole room. For a bathroom or an outdoor area, no unprotected rechargeable version is suitable: look at bathroom strip lights and a sealed strip light for damp rooms. And to equip several rooms, start from all our lighting.
Secure payment, tracked delivery, returns and Designix customer service: you order with no risk, and the rechargeable selection can be browsed by format and by fixing method.
Frequently asked questions about the rechargeable LED strip light
Can a ceiling light or a recessed LED spot in the ceiling be replaced by a rechargeable strip light?
No. A ceiling light or a recessed spot is connected to the mains and lights a whole room; a rechargeable LED strip light is battery-powered supplementary lighting. To replace a ceiling light point, you need a 220V model or a rechargeable spot intended for that use.
How long does a rechargeable LED strip light stay on?
Battery life depends on the battery capacity, the lighting mode and the length of the strip: it cannot be stated universally. In practice, a strip light is mainly used in short sessions, a few minutes under a cupboard or on a worktop. For continuous lighting, prefer mains power.
Is a rechargeable LED strip light enough to work in a workshop?
As supplementary lighting, yes: it helps under a shelf or in a dark corner. As main lighting for a workbench, no: you need a longer 220V strip light, fixed above the worktop. The rechargeable one remains the solution for occasional use and areas without a socket.
Can a rechargeable LED strip light be installed in a bathroom or outdoors?
An unprotected strip light is vulnerable to humidity and splashes. In a bathroom or outdoors, you need a high protection rating, such as IP65, and installation outside water zones. Rechargeable models are rare in these versions: look instead at sealed strip lights.
Wireless rechargeable LED strip light with motion sensor: how does it work?
The sensor, powered by the battery, switches the strip light on as soon as movement passes through its field, then off after a delay. Since no cable connects the strip light to the mains, it can be placed in a cupboard or a hallway without a socket. The range and the delay vary depending on the model.





