Recessed table lamps

This selection is also available in our French store: Lampes à poser encastrables

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

What table size for how many people?
Allow about 60 cm per guest: 120 cm for 4, 160-180 cm for 6, 200+ cm for 8. Dimensions are listed on each product page.
Which tabletop material should I choose?
Wood is warm, ceramic is highly resistant to scratches and heat, glass is bright and airy. Choose according to how you will use it.
Extendable or fixed?
Some tables are extendable (with extension leaves), as stated in the title and on the product page.
How do I care for the tabletop?
Wipe with a soft cloth; avoid standing water on wood and abrasive products.
Recessed table lamps
Designix · Design lighting

The right furniture, in the right place

Check the dimensions with our fit checker and receive pieces made to last. Unsure? Our team will answer your questions.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Only fit a recessed point where light is genuinely missing, not across the whole surface: the body of the fitting disappears into the wall, ceiling or floor, and only the light remains visible. A recessed table lamp is chosen first by its mounting, then by the direction of its beam and its protection rating.

What is a recessed table lamp and what is it for?

A recessed table lamp is a fitting whose body sinks into the mounting surface, wall, ceiling or floor, with only the visible face sitting flush. It lights without adding an object to the room: accent light, lighting for a worktop or a marker on a staircase.

Recessed table lamps: discreet by construction

In a living room, the wall stops being a wall pierced with bright points: it becomes a surface that gives light. In the evening, a line of light grazes along a bookcase or traces a painting without anyone seeing where it comes from. In a hallway, the same principle turns a passage you endure into a readable route. That is what all our light fittings offer: a source that fades away in favour of the effect.

What they do not bring

No decorative presence: switched off, a recessed lamp is almost invisible, whereas a table lamp furnishes a corner of a sideboard. They also require work: a cut-out at the diameter of the housing, a free depth behind the surface, and a power supply brought to the point. The mounting governs everything: plasterboard, concrete, render or wood are not cut in the same way.

How to choose between the variants: format, material and light?

The choice comes down to three points: the mounting that must take the housing, the desired direction of the light, fixed or adjustable, and the material of the face, metal, wood, ceramic or glass. The type of source and the base are decided afterwards, according to the use and the expected result.

Recessed table lamps with LED or interchangeable source

An integrated LED cannot be replaced: the module lasts a long time, but if it fails, the whole fitting has to be changed. An interchangeable source on a base lets you choose the bulb, its intensity and its hue, and can be replaced without touching the housing. The design LED models suit points you no longer want to open up; the interchangeable option gives reassurance for heavily used points.

Finish and material: what it changes in the room

A brushed or lacquered metal face structures and stays understated; wood warms a pale wall; ceramic brings a soft matt texture. The gold and black finishes draw a crisp contrast on a white wall, while a matt white disappears completely. The Scandinavian style remains the easiest to match.

Where to install them: ceiling, wall or floor?

On the ceiling, the recessed fitting gives downward light, useful in a hallway or a covered terrace. On the wall, it traces a painting, a headboard or a step. On the floor, it marks out a path. The height and orientation of the beam matter more than the number of points.

Recessed table lamps in the ceiling

A recessed ceiling light illuminates what is below it: a landing, a worktop, a terrace table. Pointed downwards and slightly offset from the line of a piece of furniture, it avoids sending light into the eyes of anyone passing. In a narrow hallway, two or three aligned points are enough to remove the dark zones.

Recessed table lamps in the wall

The wall allows a directed beam: an adjustable recessed light above a headboard lets you read without lighting the whole room. Along a flight of stairs, a low point placed every few steps transforms the evening descent. The adjustable table lamps in the range give an idea of the possible adjustment, even if a recessed fitting is often set once and for all.

Which recessed fitting for which room and mounting
Room or use Mounting Light intended Point to watch
Living room Wall or ceiling Accent and highlighting Avoid a point in the line of sight
Bedroom Wall, headboard Reading and warm atmosphere Plan for low intensity or a dimmer
Study Wall above the desk Neutral light, no glare Aim at the desk, not the screen
Hallway and stairs Wall or ceiling Marking the passage Align the points to avoid shadows
Dining room Wall or perimeter ceiling Atmosphere, without competition Keep the centre of the table free
Covered terrace Ceiling or wall Discreet outdoor lighting Protection rating suited to exposure

Indoor or outdoor: which protection rating to choose?

The IP protection rating indicates a fitting's resistance to dust and water. In a dry room, minimal protection is enough; near a shower or under a canopy exposed to splashes, you need to go up in protection. For an uncovered terrace, aim for a high rating and a face resistant to UV.

Recessed table lamps for the terrace

On a terrace, the light should stay low and discreet so as not to dazzle guests. A point recessed into a low wall or the slab lights the ground without rising towards faces. The mounting matters as much as the fitting: in render or concrete, the cut-out requires suitable tools and a well-drained housing.

Recessed table lamps outdoors: points to watch

Moisture rises from below and stagnates in a poorly sealed housing; a point set flush with the ground must be able to drain water. The fixing must hold on a mounting that works with frost and sun. And the power supply must be protected as it should be: that is the electrician's job, not improvised assembly.

How to arrange spotlights in the ceiling?

Spotlights are placed according to what you want to light, not at random across the surface: aligned along the walls at a distance that avoids cast shadows, closer together above a worktop, evenly spaced in a hallway. Better a few well-aimed points than many uniform ones.

How to install recessed spotlights in the ceiling?

Mark the points, check there is no conduit or joist, cut to the diameter of the housing, bring the power supply, connect and then fix the fitting. The order matters: a bad marking costs you a ceiling to patch. The depth available above the board decides the model, not the other way round.

Recessed table lamps in plasterboard

In a plasterboard panel, the cut is made with a hole saw after locating the studs. The void above must house the housing, the driver and the wiring without compressing them. Spring fixing suits a sound panel; on a thin or damaged panel, a clamp holds better. For prolonged work lighting, looking at desk lamps avoids multiplying the points.

How to wire several lamps to a single power supply?

Several fittings can run from the same supply: they are connected in parallel, each housing receiving the live, the neutral and the earth if the fitting is class I. The number of points depends on the total power and the existing circuit, to be validated by an electrician.

Wiring 3 lamps to 1 switch

The switch controls the whole set: the three fittings come on and go off together, which suits a hallway or a marking line. If you want to switch them separately, you need a second circuit or an additional switch. The conductor cross-section and the protection rating are checked against the existing installation.

Wiring several lamps in parallel: the principle

In parallel, each fitting receives the same voltage: the feed goes from the first housing to the second, then to the third. You do not loop in series, otherwise a blown lamp cuts the line. Each connection is made in an accessible box, never buried in the cut-out, and the fitting's terminal block must remain reachable.

Recessed LED table lamps: which light for which room?

The colour temperature sets the atmosphere: warm light for a bedroom or living room, more neutral for a study. The luminous flux, expressed in lumens, determines the amount of light received. A dimmer, if it is compatible with the fitting, lets you adjust the intensity in the evening.

Colour temperature and colour rendering

Around 2700 to 3000 kelvin, the light leans towards warm white and suits rooms where you relax. Around 4000 kelvin, it becomes more neutral and renders hues accurately on a worktop. Colour rendering matters just as much: light that is poor in this respect dulls wood and fabrics. A bedroom copes badly with cold white at the end of the day.

Flux, power and supply: what to check

Flux in lumens tells you the amount of light; power in watts tells you the consumption. A quality driver preserves service life and avoids flicker, especially at low intensity. Before fixing, check that the module is replaceable and that the chosen dimmer is compatible with the fitting. The LED references designed for work illustrate well what a neutral, stable light brings.

Which fittings to pair them with in a living room or dining room?

Recessed lighting goes well with table and floor lamps that bring presence: a floor lamp near the sofa, a glowing sphere on a sideboard, a ceramic piece on the table. The recessed light illuminates, the freestanding light decorates; it is this duo that makes the room readable in the evening.

The most beautiful living room lamps: what makes them desirable

A beautiful living room lamp is judged switched off as much as switched on: a right silhouette, a material pleasant to look at, a shade that diffuses without dazzling. The table lamps for the living room bring that presence at the centre, while the modern living room pieces play on more graphic lines. In a bedroom, the same balance is sought with bedroom lamps and a recessed point above the headboard.

Italian design table lamps and floor lamps: the counterpoint

Italian design is read in its proportions and its work with materials: glass, lacquered metal, ceramic. A glowing sphere on a low sideboard is enough to warm a corner while the recessed lighting holds the rest. For lovers of understated lines, the metal models for the study and the ceramic bedside pieces complete the range. A linen shade softens the light and tempers a very white interior; a crystal model plays the opposite contrast, more sparkling.

Recessed, wall light or floor lamp: which solution for which need
Need Suitable solution What it brings Good to know
Light without clutter Recessed in the wall or ceiling The source disappears into the mounting Cut-out and power supply to plan
Highlight a painting Adjustable recessed fitting Directed, adjustable beam Check that the model really pivots
Light a worktop Recessed above the worktop Useful light, no reflection Prefer neutral light and sufficient flux
Create an evening atmosphere Table or floor lamp Visual presence and warm light Combines well with perimeter recessed lighting
Mark out a staircase Low wall-recessed fitting Discreet light markers Feed from a dedicated circuit if possible

To go further with the other families, the lighting catalogue groups the pieces by use, and the LED lighting for bedrooms usefully complements a recessed point at the headboard. In the shop, payment is secure, delivery is tracked, returns are provided for and the Designix customer service answers assembly questions before you order.

What are the drawbacks of LED lamps?

LEDs give off little heat but remain sensitive to the quality of their power supply: a poor driver shortens their service life. Some cheap models give a cold light or approximate colour rendering. The module is sometimes not replaceable, which means changing the whole fitting.

What are the trend lighting choices for the living room in 2026?

Living room projects are moving towards discreet, adjustable sources: recessed lighting around the perimeter, table lamps as a counterpoint, warm light and dimmers. Natural materials, wood, linen, ceramic, remain in demand, often combined with dark or gold finishes to structure the room.

What are the lighting trends for the dining room in 2026?

The table keeps a low, readable central source, complemented by more discreet perimeter lighting, recessed into the wall or ceiling. Warm light and the ability to vary intensity take priority over the number of points; natural materials and round shapes remain present.

Italian design table lamp: what sets it apart?

Italian design is recognisable by simple lines, right proportions and careful work with materials: glass, lacquered metal, ceramic. The lamp remains readable from every side, even switched off. In a living room, it complements a discreet recessed fitting without ever competing with it.

Can recessed lamps be fitted in a plasterboard ceiling?

Yes, provided the panel is strong enough and there is sufficient void above to house the housing and the wiring. Cut with a hole saw after locating the studs, avoid the studs, and use the fixing provided by the fitting, springs or clamp. Black wood pieces can then complement the wall as a counterpoint.

Our advice for choosing
Recessed surface-mounted lamps fit into a wall, ceiling or terrace to provide light without clutter: the source disappears into the surface, leaving only the light visible. This guide helps you choose format, light and mounting according to the room.