Recessed outdoor lighting

This selection is also available in our French store: Luminaires d exterieur encastrables

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
Recessed outdoor lighting
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Choosing a recessed outdoor light follows a set order: the location (wall, slab, terrace), the water it receives, then the light source. The unit sits in a recess and its glass sits flush with the surface, which settles the question of the obstacle underfoot before that of style.

What is a recessed outdoor light?

A light unit set into a recess in a wall, slab or terrace, with its glass flush with the surface. It lights a path, a facade or a step without any protrusion to catch the foot or the eye, and is chosen according to its protection rating, its light source and the direction of its beam.

Recessed outdoor light: wall, ground or terrace

Three families, three logics. The recessed wall light goes into a facade, a low wall or a step, and serves to mark an entrance. The recessed ground light sinks into a slab or a path, and sometimes bears foot traffic. The recessed terrace light adapts to the surface: wood decking, slab or gravel. The principle is the same as for a recessed outdoor spotlight fitted indoors: the surface dictates the depth and the drainage, not the colour of the unit. Compare the families in all recessed lights before settling on a diameter.

Why a recessed light changes how a facade reads

With no protrusion, the facade keeps its line. In the evening it is no longer a fitting you see but a patch of light flush with the stone, and a steady rhythm along a wall. A surface-mounted floodlight or a free-standing light does the opposite: it draws the eye and gives dirt a place to cling. A wall lit low and grazing stays clean all year, without having to be washed more often.

Recessed wall outdoor light: where to place it on a facade?

In a wall, a recessed light goes at hand height or lower to mark a threshold, and above a step or a door to signal a passage. Aim the beam downwards, away from the line of sight, to avoid glare and a dirty glass.

At what height should a spotlight be recessed into a facade wall?

Around 20 to 40 cm from the ground to mark a threshold, between 60 and 80 cm to light a step without glare, higher only if the beam grazes the wall downwards. The useful rule fits in one sentence: the lower the unit, the more the light must be aimed at the ground. Do a dry run at night, with the unit placed without sealing, standing where people will actually walk.

Steps, thresholds and paths: the recessed lights that guide the foot

Here the role is not decorative: you have to see where you put your foot. Align the units at the same spacing, along the axis of the step, and keep a regular gap between two points to create a readable rhythm. An irregular gap is immediately noticeable at night. For the surroundings of a house, modern outdoor lights offer profiles that line up neatly on a low wall.

Recessed ground outdoor light: what to check before digging?

A recessed ground light needs a deeper recess than a wall one, a draining gravel bed and a water outlet under the unit. Check the load rating if a vehicle or a piece of furniture passes over it, and choose a protection rating higher than that of a recessed wall light under cover.

Recessed terrace outdoor light: wood, slab or gravel

On a wood terrace, the cut is made in the plank, with an air gap under the unit and a cable in conduit in the void beneath. On a slab, the recess is cast or cut to the exact diameter of the body. On gravel, a wide flange stabilises the unit in a bed of stones. The common point: water must always be able to drain downwards. A recessed light drowned in a puddle rarely survives two winters.

Rectangular recessed outdoor light: what is it for?

A rectangular unit projects a band of light instead of a circle. It highlights a line of steps, a low wall, the edge of a terrace or a change of level. It is fitted along the line to be lit, and its alignment with neighbouring units is set before sealing, never after. It is the format that gives a continuous line to a path or a long facade.

Type Where it goes What it lights Watch out for
Recessed wall light Facade, low wall, step Threshold, door, passage Height and beam direction
Recessed ground light Slab, path, pool edge The ground and what borders it Drainage and load rating
Recessed terrace light Wood decking, slab, gravel Circulation area Recess and water drainage
Rectangular recessed light Wall or ground, line of steps Wide band of light Alignment before sealing

Waterproof recessed outdoor light: which protection rating to aim for?

Water resistance is read in the IP rating: the first digit covers dust, the second water. A terrace recessed light exposed to rain and cleaning needs a high second digit, while a model under a ventilated shelter is fine with a more moderate rating.

IP44, IP65 or IP67: the difference in one sentence

IP44 protects against splashes from all directions, IP65 withstands a jet of water, IP67 resists temporary immersion. These are standard benchmarks and say nothing about how well the seals last. The right reflex: aim for the rating that matches the water actually received, not the highest in the catalogue. A raised unit under a canopy does not need the same protection as a slab that gets hosed down.

Do you need a waterproof recessed light under a covered terrace?

Yes, but to a lesser degree. Under a covered terrace, water comes from cleaning and ambient humidity, not from driving rain. A moderate second digit is usually enough, provided cleaning water does not pool under the unit. Also check the temperature: a recessed light under cover heats up more, and an integrated LED ages faster there than a ventilated model.

Location Exposure IP rating to aim for Type of recessed light
Covered terrace, under canopy Indirect rain Moderate Adjustable recessed wall light
Facade exposed to wind Driving rain High Fixed recessed wall light
Terrace slab Rain, cleaning, puddles High Flush recessed ground light
Pool surroundings Splashes and spray High Stainless steel recessed ground light
Gravel path Ground moisture High Recessed ground light with wide flange

What light for a recessed outdoor light: warm white or neutral white?

Outdoors, a warm white close to that of the living room extends the mood onto the terrace, while a more neutral white makes paths and facades easier to read. The beam angle matters as much as the tint: narrow to highlight a detail, wide to light without a spot.

Narrow or wide angle: which beam for which effect?

A narrow beam, around 15 to 25 degrees, draws a crisp cone: it highlights a shrub, a house number, a wall texture. A wide beam, beyond 60 degrees, lights an area without drawing a circle in it, which suits a step or a passage. In between, it is all a matter of distance: the same angle does not give the same patch at 50 cm and at 3 m. Note the height before choosing.

How many light points to mark out a path?

The method rather than the number: measure the useful length of the path, divide by the spacing that looks regular to the eye, add a point at each end. Too wide a gap creates black holes, too tight a gap turns the path into a runway. For a softer mood, copper lights age well on a facade and pair with a warm white.

E27 outdoor bulb: can a recessed light take one?

Some recessed outdoor lights take an E27 bulb behind a closing glass, which allows the source to be changed; others carry an integrated LED that cannot be replaced. The socket often dictates the depth of the unit: check the length of the bulb before drilling.

GU10 base, E27 socket or integrated LED: what it changes in use

The E27 socket accepts an ordinary, replaceable bulb, but it needs room behind the glass. The GU10 base directs a short beam and fits into a flatter unit. The integrated LED gives the slimmest profile, at the cost of a source you cannot replace. On a unit sealed into a slab, the question of replacement matters more than bulk.

Source Base or connection Result When to choose it
E27 bulb E27 socket behind glass Replaceable, tint of your choice When you want to change the source
GU10 bulb GU10 socket Directed beam To highlight a detail
Integrated LED Direct connection Slim unit, not replaceable When space behind the glass is tight
Warm white Depending on the source chosen Soft mood Terrace and house surroundings
Neutral white Depending on the source chosen Clear relief Path, facade, staircase

Can the source of an already fitted recessed light be changed?

That is decided before sealing. A model with a removable glass gives access to the socket; a model with integrated LED and glued glass cannot be repaired. Ask for the instructions and check whether the glass unscrews. Once the unit is set into the slab, the only solution is to redo the recess.

How to install a recessed outdoor light?

Mark the location, check that no conduit or pipe runs through, then make a recess to the diameter of the unit. The connection and the sealing of the cable gland are done with the power off; if in doubt about the supply or the transformer, entrust the wiring to an electrician.

Recess, depth and drainage: the three points not to miss

The recess must take the body of the unit without forcing, with enough depth for the cable and the connector to pass. Under the unit, a gravel bed and a slight slope carry water downwards. The cable gland is tightened and the seal checked before closing up. A recessed ground light fitted without drainage fills up at the first heavy rain.

Wiring a 12 V or 230 V recessed light: what changes

At 230 V, the unit connects directly to the mains and each point is independent. At 12 V, you need a transformer and a shared low-voltage network, which simplifies the wiring of a series but adds a box to house somewhere dry. Whatever the setup, cut the power before working and have the diagram checked by an electrician if you are unsure.

How to maintain a recessed outdoor light?

Clean a recessed light with clear water and a soft cloth on a cooled glass, without a high-pressure jet on the seals. Once a season, check that water drains under the unit and that the screws have not worked loose; a cloudy glass or a cracked seal can be replaced.

Cleaning glass, stainless steel and aluminium without scratching

Tempered glass is cleaned with warm water and a microfibre cloth, without abrasive products. Stainless steel is polished along the grain, with a lint-free cloth. Anodised aluminium dislikes acidic detergents, which dull the finish. In every case, with the light switched off for a while: a hot glass and a cold cloth do more damage than a stain.

What damages a recessed light in a single season

Four causes keep coming back: leaves and soil blocking the drainage, water pooling for lack of a slope, a seal drying out in the sun and loose screws letting moisture in. A quick check at the change of season is enough to avoid most failures. A unit that flickers or takes on water is dismantled before the circuit is touched.

Where to buy recessed outdoor lights?

A recessed outdoor light is bought on its data sheet: IP rating, base, recess depth and available spare parts. In store or online, ask for the instructions and the electrical class before comparing, and be wary of clearance lines with no base or source reference.

Lighting clearance in Lyon: what to check before buying

Lighting clearance in Lyon appeals on price, but a limited series can leave you without a spare part. Before buying, check the IP rating on the product label, the base reference, the presence of the instructions and the condition of the seals on a display model. For a unit sealed into a slab, a reference whose source stays replaceable is better, even if it means passing up a bargain.

Lighting store in Lyon or online shop: how to compare

A lighting store lets you judge the finish, the real tint and the weight of the unit, not its water resistance over time. The online shop gives access to full data sheets, instructions and reviews on how the seals hold up. Online reviews rarely say how a model ages outdoors: cross-check several sources and always come back to the data sheet. For a coherent project, widen the search to design lights for the garden and pool lighting before settling on a range, then look at free-standing outdoor lights for areas without masonry.

At Designix, payment is secure, delivery is tracked and returns are provided for; customer service answers before and after the purchase. First choose the type of recessed light and its IP rating from the selection of lights, then confirm the recess depth: that last figure decides everything when you drill. The recessed lights catalogue brings together indoor and outdoor formats, and white outdoor lights blend into a pale wall.

If the project extends to the house, outdoor pendants for a pergola complete the low-level lighting, while indoors LED lights for the living room and kitchen lights follow the same concern for low, crisp light. For a well-finished entrance, also look at lights for toilets and, for exceptional rooms, the most elaborate pieces.

Does a recessed outdoor light have to be waterproof?

Not to the same degree everywhere. The IP rating must match the water the light actually receives: driving rain and cleaning on a slab, simple humidity under a canopy. A recessed ground light exposed to puddles needs a higher second digit than a sheltered recessed wall light.

How to install a recessed outdoor light in the ground?

Mark the area, check that no conduit runs through, then dig a recess to the diameter of the unit, deeper than the height of the light. Allow for a gravel bed and a water outlet, run the cable in conduit and make the connection with the power off.

Can a recessed outdoor light be fitted on a wooden terrace?

Yes, provided you choose a model designed for decking or a slab and leave an air gap under the unit. The cut must let the body through without forcing, and the cable runs in conduit under the terrace. A flush recessed light avoids any roughness underfoot.

Which E27 bulb to choose for an outdoor light?

Take a bulb whose base matches the socket of the light, suited to outdoor use and to the heat the closing glass can take. Power and bulk matter: a bulb that is too long prevents the glass from closing. Check the instructions before buying.

What is a rectangular recessed outdoor light for?

A rectangular recessed light projects a band of light rather than a circle: it highlights a line of steps, a low wall or the edge of a terrace. It is fitted along the line to be lit, and its alignment with the other units is set before sealing.

Our advice for choosing
Recessed outdoor lights are installed in a wall, slab or terrace and sit flush with the surface to light a path without any visible obstacle. Here you will find how to choose the right size, IP rating and light for each area.