Recessed LED strips

This selection is also available in our French store: Réglettes LED encastrables

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
Recessed LED strips
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

A recessed LED strip diffuses a continuous line of light with no visible hot spot, because the tape is hidden behind a diffuser: neither the source nor the fixture is visible. It is chosen on three criteria: the length to cover, the colour temperature and the room's protection rating.

What light does a recessed LED strip give?

A recessed strip gives a linear, even light with no break or hot spot, because the LED tape is masked by a diffuser. It lights downwards for a room, or towards a wall for indirect wall-washing. The colour temperature, warm white or neutral white, sets the mood.

Recessed LED strip for ceilings: a line of light with no break

On a flat ceiling, the profile aligns with the axis of the room and draws a clean line that leads the eye towards the far end. On a suspended ceiling, it sits flush with the surface, which removes the shadow of the fixture and the boxed-in feel. The result stays discreet all day long.

Recessed LED strip in plasterboard: what the thickness of the support changes

A thirteen-millimetre plasterboard only offers the depth of its cut-out. The profile must stay thinner than the space available, otherwise it sits badly or protrudes. Locate the studs before cutting, and plan a reinforcement when the line is long. The power supply is run before the ceiling is closed.

Where to install a recessed LED strip: ceiling, furniture or kitchen?

It goes where a discreet line is enough: on the ceiling to light a room, under a shelf or in a cupboard to read what is stored, and under the wall units of a kitchen to work on the worktop without cast shadow.

Recessed LED strip for furniture: under a shelf or in a cupboard

Under a shelf, the light falls on what is stored below and removes the shadow of your hands. In a cupboard, it makes the back readable without stepping inside. The constraint is the thickness of the furniture and the cable route; a slim model and an accessible power supply solve the problem. See the motion-sensor models for a cupboard opened by hand.

Recessed LED strip for kitchens: lighting the worktop

Under the wall units, a continuous line replaces the extractor hood as the working light and removes the shadow of your body on the chopping board. Direct reflection on a glossy worktop should be avoided: an opal diffuser and a slight setback towards the wall are enough. The 220V models without a transformer simplify connection.

How to choose the length and power of a recessed strip?

The length follows the line to be lit, from the edge of the worktop to the end of the hallway. The power then depends on the surface and the mounting height: the same strip placed near a wall lights noticeably more strongly than high on a ceiling.

Recessed LED strip 120 cm 35 W white: reading the spec sheet without mistakes

These three pieces of information come up often in searches, and they do not mean the same thing. The length describes the footprint of the profile, not the lit surface. The power in watts gives a consumption, not a light level. The word white stays vague as long as the colour temperature is not specified. If the stated flux seems inconsistent with the power, go by the power.

Short lengths, cutting and connectors

A short line is handled with a short profile or a tape cut to the right size. Beyond the available length, two sections are placed end to end and each is powered, rather than running an overly long cable. The full range of LED strips can be browsed by length.

Cuttable LED tape: how does it work?

A cuttable tape has regular cutting marks, and it is cut only at these marks. Cutting between two marks breaks the circuit and the last segment stays off. After cutting, the power supply is reconnected with a connector designed for the tape.

Locating the cutting mark before cutting

The mark is printed on the tape, often a line between two contact pads. Measure twice, count the segments, then cut right on the line with a clean craft knife. A segment that is too short cannot be recovered: better to keep a few centimetres of margin under the diffuser.

What cannot be cut on a recessed profile

The aluminium profile, the diffuser and the power cable cannot be cut to order. A profile that is too long is replaced, it is not shortened cleanly. The diffuser is ordered to the profile's dimension. For damp rooms, prefer the waterproof versions already assembled.

Recessed strip, LED ceiling light or wall light: how to choose?

The strip lights in a line and disappears; the LED ceiling light lights in a broad pool at the centre; the wall light lights a wall or a reading corner; the chandelier brings a visible object. The choice depends on the surface and the intended effect, not on a ranking of quality.

Which fixture for which lighting intention
Fixture Type of light Where it suits What to check
Recessed LED strip Continuous, close-to-surface line with no hot spot Ceiling, suspended ceiling, under furniture, niche Length, protection rating, 220V or 12V
LED ceiling light Broad pool at the centre of the room Living room, bedroom, kitchen, hallway Diameter, power, colour temperature
LED wall light Vertical light, wall or reading corner Entrance, hallway, headboard, living room Wall fixing, protection rating for damp rooms
Chandelier or LED pendant Downward light and a visible object Living room, dining room, entrance Suspension height, weight
Self-adhesive LED tape Indirect accent light Behind furniture, under a worktop Clean surface, power supply, cutting

What is the best LED strip?

There is no single best LED strip in the abstract: the right reference is the one that covers the line to be lit, with the colour temperature and protection rating suited to the room. Look at the useful length, the power supply and the diffuser before the finish.

The criteria that make a difference in use

The useful length first, measured on site. The colour temperature next, one shade per room to avoid visible mismatches. The protection rating decides the damp room. A 220V supply avoids the driver; 12V is used where the cable must stay slim. An opal diffuser is better than bare tape.

Getting the model wrong: mistakes to avoid

Neglecting access to the driver means reopening the ceiling at the first replacement. Mixing two shades in the same room shows immediately. Buying without measuring the available cut-out blocks installation. For a utility room, compare the workshop models and the versions designed for the garage.

What are the drawbacks of LED lights?

LEDs have few faults, but they exist: a light that is too white if the colour temperature is badly chosen, possible flicker when the 12V driver is poor, and colour rendering that varies from one model to another. A good diffuser limits glare.

Flicker and colour rendering

Flicker comes from the power supply, not from the LED itself: a low-end driver makes the light vibrate without you first knowing why. Colour rendering, for its part, changes the way a worktop or a fabric appears. Two models side by side do not give the same result.

What is not a drawback

Service life, low consumption and the absence of heat are not selling points but consequences of the principle. A well-sized strip does not heat a piece of furniture. The real issue remains the choice of shade and the quality of the power supply. Rechargeable strips avoid wiring when there is no socket.

How to install and maintain a recessed LED strip?

Switch off the power, mark out, then adapt the installation to the support: cut-out in plasterboard, screwing onto a solid ceiling, gluing or screwing under furniture. The power supply is prepared before installation and the driver stays accessible. A dry cloth is enough for maintenance.

Recessed LED strip: installation according to the support

In plasterboard, the cut-out is made between two studs with a hand saw, then the profile is fixed with its brackets. On a solid support, screw directly. Under furniture, check the thickness before drilling. In every case, run the power supply first and keep access to the driver.

Bathroom, outdoors: the protection rating to respect

Above a mirror or in a damp room, a reinforced protection rating is required; elsewhere, a standard rating is enough. Outdoors, the fixing and the sealing matter as much as the light. See IP65 strips and a suitable bathroom lighting. For a canopy, go to outdoor lighting.

One last point before ordering: compare the length you measured at home with the profile's dimension, and check the space for the driver. At Designix, payment is secure, delivery is tracked and returns are provided for; customer service answers questions on dimensions and connections. Browse all our light fixtures to place the strip among the other sources, or go straight to the LED strip range and the waterproof outdoor models.

Frequently asked questions about recessed LED strips

Recessed LED strip in plasterboard: how to fix it?

Locate the studs before drilling, cut a recess with a hand saw between two studs, then fix the profile with its brackets or by screwing into the material. Reinforcement is needed if the profile is long or heavy. Plan the cable route before closing up.

Can a recessed LED strip be installed in furniture?

Yes, provided you choose a profile thinner than the furniture and an accessible power supply. Under a shelf or in a cupboard, the close light avoids cast shadow on the contents. Check the space for the driver and whether the cable can be run to a socket.

Does a recessed LED strip need a transformer?

A 220V strip connects directly to the mains. A 12V strip needs a driver that steps the voltage down: space must be made for it, often above the ceiling or in the furniture, and access kept for replacement. This is decided before installation, not after.

Does a recessed strip replace an LED ceiling light in a living room?

Rarely on its own: it lights in a line, highlights a wall or a piece of furniture, but a broad pool at the centre remains useful for reading or entertaining. The two complement each other, the strip as accent and the ceiling light as general lighting. The choice depends on the surface and the ceiling height.

Can an LED strip work with a motion sensor?

Yes, by choosing a model already equipped or a compatible sensor placed on the power supply. This is useful in a hallway, a cupboard or a little-used garage. The 220V sensor models avoid the driver, and the garage versions hold up to high mounting.

Our advice for choosing
A recessed LED linear light fits into a ceiling, a suspended ceiling or a piece of furniture to provide linear light with no hot spots. This collection brings together recessed profiles, to be chosen according to length, colour temperature and protection rating.