Hanging rattan table lamps
This selection is also available in our French store: Lampes à poser suspendus en rotin
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Woven rattan filters light instead of blocking it: it spreads a warm halo and casts the weave pattern onto the walls and ceiling. Allow one woven piece per area to light, a table lamp near the sofa or a pendant above the table, and choose the size according to the surface to cover.
Rattan lamp: what light does it give in a room?
Woven rattan filters light instead of blocking it: a rattan lamp spreads a warm halo and casts the weave pattern onto the walls and ceiling. The tighter the weave, the softer and more diffuse the light; the more open it is, the more pronounced the drawn shadows.
Tight weave or open weave: what changes in the evening
A tight weave gives even light, without patches, suited to a reading or bedside lamp: you are not trying to see the pattern, you are trying to light without glare. An open weave, on the other hand, stands out most when lit: the solid and open areas draw shadows on the wall and ceiling, which suits a pendant above a table or a lamp placed in a corner. In both cases, keep the bottom of the fixture out of direct view when sitting on the sofa.
Natural rattan or lacquered rattan: the effect once lit
Natural rattan, in its honey or straw tones, warms the light of the bulb and gives an amber halo. Lacquered rattan, white or black, reflects light instead of absorbing it: the halo stays more neutral and the weave reads as a crisp drawing. A lacquered shade pairs well with linen lampshades and pale walls, while raw rattan works better with woods and unbleached fabrics.
How to choose between a table lamp and a rattan pendant?
A table lamp can be moved and lights a specific area: bedside, end of the sofa, desk. A pendant is fixed to the ceiling and lights a table or a passage. The choice therefore depends on the surface to be lit and the available height, not only on style.
Rattan floor lamps: where to place them in a living room?
A rattan floor lamp finds its place behind an armchair or in the corner of a sofa, where you need light without drilling. Check the stability of the base and leave a clear passage around it. For an already furnished living room, small-format living room table lamps take over on a console or a side table.
Rattan pendant: what size above a table?
A large open volume occupies the centre of the table and becomes the landmark of the room; a narrower format suits a table for two to four. The budget is compared mainly to the size and fineness of the weave. For a bedroom, bedroom models remain more discreet than a pendant, and at the desk a desk table lamp avoids hanging above the screen.
| Room | Type of fixture | What it lights | To check |
|---|---|---|---|
| Living room, sofa corner | Rattan table lamp | An armchair, the end of a sofa | Stability of the base and clear passage |
| Dining room | Rattan pendant | The tabletop and faces | Adjustable cable height |
| Bedroom | Small table lamp | The bedside, without glare | Switch within reach from the bed |
| Desk | Table lamp, adjustable if needed | The work surface | No shadow on the keyboard |
| Hallway, corridor | Pendant or floor lamp | The passage area | Clearance under the fixture |
| Covered terrace | Rattan pendant | The outdoor table | Protection rating and shelter from rain |
What height for a hanging lamp?
The bottom of a pendant should stay above the eye line of seated people and high enough not to hide the table or get in the way. Adjust the height once the table is in place, then check that the bulb is not visible while seated. An adjustable cable makes this adjustment easier.
Above a dining table
Generally, the bottom of the shade sits around 75 to 80 cm above the tabletop, which places the fixture at eye level once seated. An open model sometimes hangs a little lower than a tight one, because the aim is not to hide the bulb but to let the weave be seen. Always adjust after installing the table, never before.
In a hallway or corridor
In a passage where people walk upright, clearance is measured against the tallest person in the household: the fixture stays above eye level, and the passage is kept clear across its full width. A modern living room lamp on a floor stand, placed in the corner, avoids the problem when the ceiling is low.
What is the difference between wicker and rattan?
Rattan is a smooth, solid palm stem, wicker a more supple willow branch. Both are woven, but rattan keeps a rigid shape and a regular grain, while wicker requires more care and marks more easily. Both dislike prolonged humidity.
Recognising a well-finished rattan weave
Look at the regularity of the mesh and the way the stems cross at the corners: a careful weave leaves no irregular gaps and has no protruding strand. Edges should be tucked in, not glued. On a lamp, the structure holding the socket stays rigid, without play.
How to care for and dust a rattan lamp
A dry cloth or a feather duster is enough, mesh by mesh, once a month. Avoid standing water, abrasive products and damp rubbing that loosens the fibre. For a pale wood living room, living room wood and ceramic bases are quicker to dust; rattan just takes a little more patience.
| Material | Appearance | Diffused light | Care | Outdoors |
|---|---|---|---|---|
| Rattan | Solid stem, regular weave | Warm halo, drawn shadows | Dry cloth, dusting | Sheltered only |
| Wicker | Supple branch, marked grain | Soft light, irregular weave | Sensitive to humidity, warps | Avoid |
| Bamboo | Straight, pale fibre | Filtered light | Dry cloth, no water | Sheltered |
| Linen (shade) | Taut, matt fabric | Even light | Dry dusting | No |
| Black or gold metal (structure) | Fine lines | Does not filter, holds the weave | Soft cloth | Depending on finish |
Can a hanging rattan table lamp be installed outdoors?
A rattan fixture can stay outside under an awning, a covered terrace or a conservatory, sheltered from direct rain. Natural rattan dislikes standing humidity and prolonged sun. Check the protection rating of the fixture and bring it in as soon as the weather turns.
Under an awning or a covered terrace
This is the only reasonable outdoor use: rain does not reach the weave, the sun does not beat down all day and the air circulates. A pendant above a terrace table extends the dining room outdoors, provided you leave clear clearance above heads.
What to check before leaving the fixture outside
The protection rating is on the product sheet: an IP44 rating corresponds to protection against water splashes, which remains a general guide and does not replace real shelter. Also check the fixing against wind and bring the lamp in during storms or persistent humidity.
How to wire several lamps on a single electrical supply?
Several lamps can run from the same supply if they are connected in parallel: each socket receives the live and neutral, then the conductors continue to the next. Work with the power off, with terminals suited to the number of wires, and check that the circuit can handle the whole.
Wiring several lamps in parallel rather than in series
In parallel, each lamp receives the same voltage and keeps working if another is disconnected. In series, the current passes through one lamp then the next: a blown bulb cuts everything. For three pendants above a table, parallel is the only reasonable option.
Branching off a supply: what to check before closing up
Switch off the breaker, identify the live, neutral and earth, use a terminal block sized for the number of conductors and check the circuit load before adding points. If in doubt about the wire cross-section, an electrician decides. For evening ambience, a dimmer requires compatible design LED bulbs, otherwise the fixture flickers.
How to match a rattan lamp with the rest of the living room?
Rattan matches through its material more than its colour: it warms a white interior, softens a wooden living room and holds its own with black or gold metal. Pair it with a linen sofa, a pale wood table, a cantilever seat, keeping only one woven piece visible per area.
Design ball table lamp and rattan: how to mix shapes?
A woven sphere and a slim metal base answer each other without repeating: the roundness of the rattan breaks the straight lines of the sofa, the fine structure lightens the volume. A rattan cantilever seat in the same room is enough as an echo; there is no need to add a third. If the room is already very graphic, a Nordic line in white calms the whole.
Italian design table lamp: what changes in a living room
Italian design is recognised by simple lines, just proportions and a careful finish. Combined with rattan, a table lamp in this style brings a crisp shape that contrasts with the weave: the eye reads the silhouette first, then the material. This offset is what avoids the catalogue effect.
The most beautiful living room lamps: composing without overloading
One large woven piece per area, a low light point near the sofa, a high point above the table: the composition relies on this alternation. Metal structures and bedside ceramic bring different materials without competing with the rattan. For shapes, see the adjustable lamps when the light needs directing.
In which rooms to install a rattan lamp?
Rattan works in every room as long as the air stays dry: living room for a pendant above the table, bedroom for a small bedside model, desk for a lamp placed near the screen, hallway for a fixture that welcomes. Avoid the bathroom and very damp rooms.
Living room and dining room
In the living room, the woven lamp serves as supplementary light in the evening, when the ceiling light goes off. In the dining room, the pendant becomes the main source: it lights the tabletop and faces, and its cast shadow makes the decor. This is where the open weave comes into its own.
Bedroom, desk and hallway
In the bedroom, a small bedside format with a switch within reach from the bed is enough. At the desk, a stable lamp that adds no shadow on the keyboard, on the side opposite the writing hand. In the hallway, a pendant or a floor lamp marks the arrival. Table lamps in natural materials and the black wood version complete the weave without repeating it. Find the rest in the Designix lighting universe.
To choose the shade diameter according to the table and set the cable height before drilling, take your measurements then adjust the position without stress. Browse all our lighting collections to compare materials before settling on a rattan model.
Frequently asked questions
What is a dynamo lamp?
A dynamo lamp produces its own electricity thanks to a small generator turned by hand or a crank, with no plug or battery. It is mainly used as a backup or a portable supplementary lamp. In a living room, a rattan lamp remains a fixture to connect to the mains or fit with a bulb.
What is the best lamp for plants?
A supplementary lamp lights the plant but does not replace daylight: what matters is the exposure time and the proximity of the source. A rattan lamp placed near a plant mainly adds a warm ambience in the evening, without acting as a horticultural lamp.
Wiring 3 lamps to 1 switch: how to do it?
The three lamps are connected in parallel on the same supply: live and neutral distributed to each socket, then the switch controls the whole circuit. Switch off the power, use terminals suited to the number of conductors and check the circuit load.
How to arrange ceiling spots when adding a pendant?
The pendant occupies the centre of the table and serves as main lighting; recessed spots take over around the edges to avoid dark areas. Avoid placing a spot just behind the pendant, which would create a shadow on the tabletop.
Rattan cantilever chair: which fixture to match?
A rattan cantilever seat has a fine, airy structure: a rattan pendant above the table extends the material, while a more discreet table lamp avoids repeating the weave. Keep only one large woven piece visible per area.





