Pool lighting

Start by identifying the three zones around the pool: in the water, at the edge of the coping, then the deck and walkways. A pool light is chosen zone by zone, according to water exposure and available voltage, before settling on a material and color.

• Choosing according to pool type
• Submerged, beach or deck
• Lighting without glare
• Wireless
• Ingress protection rating
• Safety
• Composing a light point
• Harmony with the house
• Buying and checking

Which pool lights to choose according to your pool?

An inground pool accommodates a submerged spotlight in the wall, complemented by points on the beach. An above-ground or tubular pool often makes do with a lamp placed or fixed to the edge, without drilling the structure. An above-ground pool is treated like an inground one for light, but access to wiring and power changes the entire installation.

Pool lights for above-ground and semi-inground pools

On an above-ground pool, the wall is not drilled: the spotlight is fixed to the structure or placed at the edge, and the power supply reaches an accessible point. On a semi-inground pool, light is distributed between the pool edge and the beach. In both cases, keep the transformer accessible for maintenance and inspection.

Light for inground pools: what changes

In an inground pool, the submerged light illuminates the water from the wall and requires perfect waterproofing at the cable passage. The beach and coping take over to avoid an isolated light well in the middle of the garden. The selection of outdoor pool lights covers both uses, from the placed model to the fixed spotlight.

Light for tubular or inflatable pools

On a tubular or inflatable pool, nothing is drilled and nothing is dug: the lamp is placed at the edge or fixed to the inflatable ring, with battery power. Bulk and recharging then become the main criteria. To locate the equipment families, browse the complete lighting catalogue.

Which lighting to choose for your pool: submerged, beach or deck?

Outdoor pool lighting consists of three layers: light in the water, that of the beach and coping, then that of the walkways. The submerged light illuminates the pool, wall lights and bollards outline the surroundings, floor lamps guide the steps. The supply voltage depends on the location and proximity to water.

Lighting around a pool: beach, coping or wall

On the beach and coping, low light avoids glaring the swimmer and highlights the pool contour. Recessed spots in a coping blend into the stone, while a wall light marks the corner of a wall or the pool house. Generally, one point is counted every two to three metres on a long edge.

Outdoor pool lighting in 12 V or 230 V

Very low voltage 12 V remains the reference for anything that stays in or in immediate contact with water; it requires a transformer placed in a dry, ventilated room. 230 V is suitable for sheltered areas, covered deck or wall away from the pool. A range classified as IP65-rated models provides a reliable reference for exposed surroundings.

How to light the deck and surroundings without glare?

Light towards the ground, never towards the water surface: low light directed downwards illuminates steps without reflecting glare into swimmers' eyes. Add two or three high points for ambiance, kept away from the line of sight from the water. Height and orientation matter more than the amount of light.

Pool floor lamp and outdoor pool floor lamp: where to place it?

A pool floor lamp is placed away from the edge, about two metres, so that its light grazes the deck without falling straight into the pool. Choose a stable model, weighted or fixed, and a head that directs the beam downwards. The outdoor floor lamp collection covers this function and can be moved if the layout changes.

Pool deck lighting idea: playing with levels

Layer three heights: a bollard or ground spot, a wall light at mid-height on a low wall, a pendant or floor lamp above the dining area. This pool deck lighting idea creates zones rather than a uniform wash of light. An outdoor pendant above the table extends the evening without lighting the water.

Wireless pool light: how does it work?

A wireless pool light runs on a rechargeable battery and is fixed to the wall or placed at the edge, without trenching or mains connection. It is suitable for pools you don't want to drill and temporary installations. Check that the model is designed to remain in contact with water, and allow for charging time.

Wireless pool light: good use cases

Above-ground pool, tubular, inflatable, seasonal rental, deck where nothing can be dug: wireless solves cases where running a cable would cost more than the lighting itself. It is turned on for evening swimming and brought back in afterwards. Charging is done out of the water, on a protected socket.

Light for tubular and inflatable pools: without drilling

On an inflatable ring or flexible wall, fixing is done by strap, magnet or clip-on bracket depending on the model. No drilling, so no waterproofing repair. For the surroundings of these removable pools, lightweight lighting is enough, for example an IP44 lamp for wet rooms installed sheltered from direct splashes.

Which ingress protection rating for a light at the pool edge?

The IP rating describes resistance to dust and water. At the pool edge, a light around a pool must at least withstand splashes: IP44 for a sheltered area, IP65 for an area exposed to rain and watering. Permanent immersion requires equipment designed to stay underwater.

IP44, IP65 and immersion: what these ratings mean

IP44 protects against solid objects larger than 1 mm and water splashes from all directions; IP65 adds resistance to water jets. The IP68 immersion rating corresponds to equipment that stays underwater continuously. A poorly rated outdoor pool lamp eventually lets moisture in, even if it works for the first few months.

Chlorine, salt and limescale: choosing a material that lasts

Treated water attacks finishes: chlorine tarnishes poorly protected metals, salt leaves a film, limescale marks glass and seals. A piece with copper finishes patinas without degrading, provided it is designed for outdoor use. For maintenance, a soft cloth and clear water are enough; homemade mixtures attack finishes and must never approach electrical parts.

Pool lighting: which safety rules to follow?

Safety first depends on installation: the light remains out of reach from the water, wiring is protected, the power supply is suitable for the wet zone, and waterproofing is checked before commissioning. Submerged equipment operates at very low voltage and should be entrusted to a qualified professional.

Lighting around a pool: installation precautions

Provide an accessible power point, mechanical protection for the cable in traffic areas and marking of conduits before any earthworks. Requirements vary depending on distance to the pool. Lighting around a pool should therefore be planned before finishing the beach, while conduits are still visible.

Pool accessible to children: what guides the choice

With children, limit points reachable from the water and favour models without visible cable at the edge. A fixed, soft light is better than a mobile device placed on the beach. Supervision remains the first barrier; lighting does not replace it.

The technical room, however, requires another family of equipment: LED lighting for the technical room withstands humidity and dust. The garage and workshop light family is also suitable for sheds and garden storage.

What is the price of a pool light point?

The price of a light point adds up the light, the power supply or transformer, the cable length, waterproofing accessories and installation labour, sometimes a trench. Two points therefore never cost twice the price of one lamp. The price list of this collection shows the current price of each model.

What makes the bill for pool lighting vary

The pool lighting budget follows four items: the number of points, the cable length, the power supply protection and site access. An inground pool already excavated costs less to equip than a pool surrounded by laid slabs. Always ask for the breakdown by item, not just the light price.

Pool lighting: accessible models or exceptional piece

Accessible models cover the essentials: lighting, water resistance, lasting the season. More elaborate pieces bring a noble material, a refined line and often better durability. Exceptional pieces are chosen for harmony with the deck as much as for light.

How to harmonise pool lighting with the rest of the house?

From the garden, you see the living room light through the bay windows: keep the same family of materials and the same ambiance temperature on both sides. Warm light for rest areas, more neutral for work surfaces. The colour of the light matters as much as that of the bulb.

Light colour for living room and overall consistency

Generally, warm light around 2700 to 3000 kelvins creates an evening ambiance, neutral light around 4000 kelvins remains clear for reading. LED living room lighting and the living room chandelier set the tone that the deck extends. Stay on one temperature per zone to avoid a mix that tires the eye.

Kitchen chandelier and modern kitchen decor

Above a work surface, light comes down and does not glare: aligned pendants or adjustable spots depending on the configuration. The kitchen chandelier is better placed above the table or island, where it also serves as modern kitchen decor. A shade in black wood contrasts with water and vegetation. A mineral beige suits a light deck and stone wall better.

Toilet light, toilet decor and original lights

In a small wet room, a compact wall light with warm light is enough, as the toilet light collection reminds us. Elsewhere in the house, the light is seen and becomes a decorative element. Unique design creations take on this role, and a garden green colour blends into the planting near the pool.

Where to buy your lights: Lyon store, clearance and checks?

In store, you judge the material, weight, IP rating and bulb base with your own eyes; remotely, you rely on the product sheet. In a Lyon lighting clearance or elsewhere, an open box, cut wiring or an isolated model without spare part should alert you. The good deal remains the one that matches the zone to be lit.

Lyon lighting store or remote purchase: what you can check

On site: metal thickness, paint durability, presence of a seal and bulb base type. Remotely: technical sheet, parts availability and return policy. For a complete project, browse our lighting universe and compare families before deciding.

Lyon lighting clearance: checkpoints before buying

Check that the light matches the protection rating of the intended zone, that the wiring is intact and that the model is not an isolated unit without accessory. A low price on a product unsuitable for the pool edge solves nothing.

The Designix shop operates with secure payment, tracked delivery, possible returns and customer service to help you validate a choice before ordering. A doubt about a dimension or bulb base is resolved with one question, before purchase.

Once the zone is identified and the protection rating chosen, comparison becomes simple: open the collection, filter by material and colour, and choose the model whose fixing matches your support.

Frequently asked questions about pool lights