Solar LED floodlights

This selection is also available in our French store: Projecteurs LED solaires

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right light output?
Allow about 100 to 300 lumens per m²: about 150 lm/m² for a living room, about 350 for a kitchen. Each product page lists the lumens.
At what height should the light be installed?
Above a table: 70-85 cm from the tabletop; in a walkway: at least 2.10 m of clearance below the bulb.
What type of bulb?
Usually E27 or E14, sometimes GU10. Specified on each product page.
Compatible with LEDs and dimmers?
Yes, in most cases; for use with a dimmer, look for the “dimmable” mention.
Solar LED floodlights
Designix · Design lighting

Light changes everything

From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

An outdoor solar LED spotlight goes where no electrical cable reaches: it captures daytime energy through its panel, stores it and lights up at night. To choose well, look at the sunlight at the location, the battery capacity, the rain protection rating and the lighting mode.

What is an outdoor solar LED spotlight and how does it work?

An outdoor solar LED spotlight produces its light from daytime energy: a photovoltaic panel recharges a battery, which powers the LED as night falls. No connection to the grid is needed, only the cable between the panel and the spotlight. Runtime varies with sunlight, battery and lighting mode.

Solar LED spot or solar spotlight: what is the difference?

A spot concentrates light on one point, a flower bed, a tree trunk or a section of wall. A spotlight lights a wide area: a whole path, a gate, a courtyard. For a facade, wide-beam solar spotlights give useful light, while small spots are reserved for details. Both are found in the complete lighting catalogue, sorted by use.

How does solar LED lighting switch on at night?

A dusk sensor detects the drop in light and arms the spotlight: it switches on by itself in the evening and off in the morning. On motion sensor versions, it is the passing of a person or vehicle that triggers the light. Recharging happens during the day, whatever control is chosen for the night.

What is the best outdoor solar LED spotlight?

There is no single model: the right spotlight is the one that lights the target area and holds up through winter. Compare the sunlight at the location, the battery capacity, the rain protection rating, the mounting and the lighting mode you want. A busy area calls for detection, continuous lighting needs more energy.

Powerful solar LED spotlight: what really changes

Chasing power alone often leads to a figure printed on the panel, not to the light received in the evening. What changes the result is a battery sized for the desired lighting duration, a panel that sees the sun for several hours a day, and a suitable mode. A detection model seems more generous when you pass, because it saves its energy for the useful moments.

How to choose your outdoor solar LED lighting?

Start from the use: a quick passage, a staircase or an entrance call for motion-activated lighting, while a terrace where you linger calls for continuous lighting, which is more demanding on the battery. Then cross-reference all our spotlights with outdoor spotlights running on solar energy to compare mountings and housings.

Where to install an outdoor solar LED spotlight around the house?

Solar works wherever running a cable is complicated: entrance facade, path, gate, terrace, garden shed or isolated outbuilding. The constraint is the sunlight reaching the panel, not the distance to the electrical panel. A spot facing south, clear of trees, recharges better than a shaded wall.

Lighting a path, a terrace or a gate

On a path, the light should guide without dazzling: regular height and a beam aimed at the ground. At the gate, an adjustable housing and a solid mounting matter more than style. For a terrace where you entertain, moderate permanent lighting is better than a harsh spotlight. Solar spotlights with motion sensors cover these passages well.

Solar LED lighting for an isolated outbuilding or agricultural use

Shed, cabin, barn without a meter: the panel is moved to the roof or a post, the spotlight stays inside or under the awning. Look at the battery capacity and the space available for the panel. Workshop lighting and garden lights complete the setup depending on the area.

Choosing your outdoor solar LED spotlight by area to light
Area to light Type of spotlight to favour Criteria to check Recommended lighting mode
Path or house entrance Solar spotlight mounted on the facade or a post Sunlight reaching the panel, high protection rating Motion detection
Gate and surroundings Adjustable spotlight, weather-resistant housing Solid mounting, length of the panel-spotlight cable Detection with timer
Terrace or courtyard Wide-beam solar spotlight Adjustable orientation, battery reserve for long evenings Moderate permanent lighting
Ornamental garden Small solar spotlight or spot on a stake Discretion, moisture protection Dusk sensor
Isolated outbuilding, shed, agricultural use Solar spotlight with remote panel Battery capacity, panel placed in the sun Permanent lighting
Workshop or garage already powered Solar spotlight as a complement to mains lighting Need for regular, prolonged lighting Switch or detection

How to read the specifications of a solar LED spotlight?

Three pieces of information matter: the IP protection rating for rain and dust, the battery capacity that determines lighting duration, and the lighting mode. The advertised power alone does not tell you the light obtained at night. Also check the housing material and the type of mounting.

What are solar LED spotlights advertised at 2000 W with 12 hours of runtime worth?

A very high power figure often corresponds to the peak power of the panel, not to the light delivered at night. When an advertised output does not hold up with the power, set the figure aside rather than repeat it. Judge on the battery, the lighting mode and the real sunlight at the site.

IP44, IP54 or IP65: which protection for outdoors?

The IP rating describes resistance to dust and water. In an exposed outdoor position, a high rating is necessary; under an awning, lower protection may be enough. Waterproof models target spots battered by rain, and mains-powered outdoor lighting follows the same protection logic.

Reading the specifications of a solar LED spotlight
Specification What it indicates What to check
Advertised power (W) Often the peak power of the panel Do not confuse it with the light delivered at night
Protection rating (IP) Resistance to dust and water A high rating is necessary in an exposed outdoor position
Battery capacity Available energy reserve Must cover the desired lighting duration, season included
Lighting mode Detection, dusk sensor or permanent lighting A detection mode saves battery
Housing material Durability and weight Aluminium or ABS depending on exposure and support
Mounting Wall bracket, post or stake Must match the wall or ground available

Motion sensor or permanent lighting: which to choose?

A detection mode only switches the spotlight on when someone passes: the battery lasts longer and the light disturbs no one. A permanent mode lights continuously, but uses more power and depends on a full recharge. Many models combine both, with an adjustable timer and a dusk sensor.

Solar LED spotlight with motion sensor: for what use?

Entrance, path, garage ramp, gate surroundings: detection makes the place safe when you arrive with your hands full. The timer prevents the light from switching off too quickly while you look for your keys. See the solar models with presence detection.

Continuous lighting or motion-activated lighting?

Continuous suits evenings on the terrace and occupied places. To place the principle on the mains side, detection with conventional power works the same way. The choice is made on the number of lighting hours you want, not on fashion.

How to install and maintain a solar LED spotlight?

Mount the spotlight at working height, aim the panel towards the sun's path and avoid areas of cast shadow. The cable between panel and spotlight is laid without any grid connection conduit. A clean panel and a housing clear of vegetation are enough to preserve recharging.

Where to aim the solar panel for the best recharge?

Towards the south in mainland France, with a tilt close to that of the roof or post carrying it. Avoid the cast shadows of a tree, a gutter or a wall, especially in winter, when the sun stays low. The cable is run without tension and without a loop where water can stagnate.

Cleaning the panel and monitoring the battery

A damp cloth and clean water are enough on the panel, several times a year, more often under trees. Check that vegetation does not cover the surface. For visual harmony with a light facade, look at designer outdoor spotlights and white finishes.

Solar spotlight or mains-powered LED spotlight: how to choose?

Solar is the obvious choice where no cable reaches and the panel sees the sun. Mains power remains more consistent for intense, prolonged lighting every night, in a workshop or garage already powered. The choice is therefore made on the location and lighting duration, not on power alone.

When a wired LED spotlight remains preferable

Garage, workshop, covered courtyard: as soon as a cable reaches and the light must be strong all night, conventional power avoids dependence on the weather. LED spotlights in general cover these needs with a consistency a battery cannot guarantee in winter.

When solar is the right choice

On an isolated site, a distant wall or a path with no conduit, solar avoids works and trenches. It also benefits from being complemented: a free-standing spotlight moves the light where you need it, with no permanent mounting.

Solar spotlight or mains-powered LED spotlight
Situation Solar LED spotlight Mains-powered LED spotlight
Electrical connection None, except the panel-spotlight cable Requires a 230 V supply
Location Where the panel captures the sun Where a cable can reach
Consistency of lighting Depends on sunlight and battery Constant lighting all year round
Installation work No trenching or work on the panel Electrical installation to plan
Maintenance Panel to clean, battery to monitor Checking connections

LED ceiling light or LED chandelier in the living room: how to complete the lighting?

Indoors, light is chosen room by room: an LED ceiling light to light a living room widely, an LED chandelier when you want a central point, an LED wall light for a wall or a corridor. Look at the size of the room, the mounting height and the colour of light.

Powerful LED ceiling light and modern LED ceiling light for a living room

The format is chosen on the surface area and ceiling height, not on a single power figure. A widely diffusing ceiling light suits a living room; a high room can take a pendant model or several light points. Keep the same colour temperature from one light to another to avoid visible differences.

LED wall light and LED chandelier: what pairing?

The wall light frames a sofa, lights a corridor or highlights a wall: mount it at eye level, without dazzling from the seat. The chandelier provides the central point above the table. Two wall lights and a ceiling light form a coherent set when the light tone stays identical. Go to ceiling lights, chandeliers and wall lights.

Frequently asked questions about solar LED spotlights

What are the drawbacks of solar spotlights?

Runtime depends on the sun: after several overcast days, the battery may no longer last all night. Light output is generally lower than a mains-powered spotlight, and the battery wears out over the years. In exchange, no electrical connection is needed and the location stays free.

Is outdoor solar LED lighting free to use?

A solar spotlight consumes nothing from the electrical grid: it runs on the energy it captures. The hardware and its installation still cost money, and recharging depends on the sunlight at the location. On an isolated site, with no meter nearby, the saving is mainly on the connection avoided.

What should you check on a solar LED spotlight advertised at 2000 W with 12 hours of runtime?

The advertised power often corresponds to the peak power of the panel, not to the light delivered at night. To judge, look at the battery capacity and the lighting mode: brief detection lasts longer than permanent lighting. The sunlight of the season does the rest.

How do you install a solar LED spot on a wall with no electrical supply?

Mount the spotlight bracket on an exposed wall, aim the solar panel towards the south when possible, and connect the supplied cable between the panel and the spotlight. No work on the electrical panel is needed. Then clear the vegetation that could shade the panel.

How does a cuttable LED strip work?

A cuttable LED strip has printed cutting marks: cut only on these marks, which correspond to the electrical connections of the strip. Cutting elsewhere leaves a section that no longer lights up. After cutting, close the circuit with a suitable connector and check the remaining length supported by the power supply.

To finish choosing, compare the lighting modes and the mounting height: that is what decides the quality of light day to day. Secure payment, tracked delivery, returns and Designix customer service support you from choice to installation. Browse the spotlight range and equip your outdoor space now.

Our advice for choosing
Les projecteurs LED solaires éclairent sans raccordement électrique : ils se fixent en façade, sur un mur de jardin ou au-dessus d'un portail. Cette collection réunit des modèles autonomes à panneau photovoltaïque, avec ou sans détecteur de mouvement, pour éclairer une cour ou une allée.