Outdoor metal table lamps
This selection is also available in our French store: Lampes à poser d exterieur en métal
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
What table size for how many people?
Which tabletop material should I choose?
Extendable or fixed?
How do I care for the tabletop?

The right furniture, in the right place
Check the dimensions with our fit checker and receive pieces made to last. Unsure? Our team will answer your questions.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Plan one low lamp per use zone: a sphere or small cylinder on the garden table, a tall-stem model near the outdoor sofa, a compact format on a narrow balcony. The metal structures the body, the glass and the bulb produce the light, and the protection rating decides what the lamp can withstand outdoors.
- Choosing for a terrace or balcony
- The light given in the evening
- Stainless steel, aluminium or painted metal
- Socket and E27 bulb
- Wiring several lamps
- Where to place the lamp
- Protecting and maintaining
- Matching indoors and outdoors
Which metal outdoor table lamp should you choose for a terrace or balcony?
A sphere or a small cylinder lights a garden table without taking up the surface, a tall stem accompanies an outdoor seating corner, a compact format slips onto a narrow balcony. Before the technical sheet, look at the available floor space, stability in the wind, cable length and whether a socket is nearby. The rest is on the model's sheet.
Black metal outdoor table lamps
Matte black stays discreet in the evening and draws a clean outline on light paving. It is a painted metal: check for chips on the edges and the base, where moisture settles. The rest of the Designix lighting selection follows the same finishing logic.
Metal and glass outdoor table lamps
The glass sets the rendering: frosted for a soft halo above the plates, clear for a crisper light near an entrance. On the sheet, look for the body material, the socket and the protection rating. To compare shapes, the catalogue of metal table lamps shows the same bodies in indoor uses.
Wrought iron outdoor table lamps
Wrought iron brings a patina and worked lines, right on a patio or in a classic-style garden. It is cleaned with a soft brush, with a touch of paint on rust spots. An adjustable model remains useful if the light needs to point down toward a step.
What light does a metal outdoor table lamp give in the evening?
The metal does not decide the rendering: the glass and the bulb do. Frosted glass diffuses a soft halo toward the table, clear glass projects a crisper light and marked shadows. A warm tone, around 2700 to 3000 kelvins, sets the evening mood; a more neutral tone, around 4000 kelvins, lights a passage more brightly.
Outdoor E27 bulb: what really changes
The E27 socket accepts most bulbs on the market, screws in without tools and is replaced in a minute. What changes in the evening is the tone and the power: stay within the maximum power printed on the socket, without seeking more light than needed. A design LED bulb gives a consistent rendering over time.
Integrated LED or replaceable bulb
An integrated LED cannot be replaced: the rendering stays constant, but the lamp follows the lifespan stated on its sheet. An E27 socket lets you adjust the tone according to the season or use. Neither is better: one requires less maintenance, the other more flexibility.
Stainless steel, aluminium or painted metal: which material for an outdoor lamp?
Stainless steel withstands direct exposure to rain and seaside conditions, aluminium combines lightness with large formats that are easy to move, painted metal offers colours and requires checking for chips, wrought iron brings a classic patina. Each model's sheet gives the exact material and protection rating, to be read before purchase.
Stainless steel or aluminium: what is the difference outdoors?
Stainless steel handles the most exposed locations and is cleaned with a soft cloth. Aluminium weighs less: a large format can be moved alone before winter, which matters on a terrace where things are stored. Avoid abrasive products on both.
Painted metal and wrought iron: what ages best
Painted metal holds well as long as the layer remains continuous; at the first chip, water reaches the metal and rust starts. Wrought iron can be touched up with the same paint, which extends its outdoor life. In both cases, maintenance decides, not the material alone.
| Material or finish | Appearance | Maintenance | Where it is most suitable |
|---|---|---|---|
| Stainless steel | Cool, satin or brushed | Soft cloth, avoid abrasives | Direct exposure to rain, seaside |
| Aluminium | Light, matte painted finish | Dust, watch for chips | Large formats easy to move |
| Painted metal | Black, white or strong tones | Soapy water then wipe dry | Urban terraces and balconies |
| Wrought iron | Patina and worked lines | Soft brush, paint touch-up | Classic style, gardens and patios |
| Metal and frosted glass | Soft diffusion, no glare | Non-abrasive glass cleaner | Table and seating corner mood |
Which socket and outdoor E27 bulb should you plan for?
The E27 socket, a large screw base, accepts most bulbs on the market and is replaced without tools. Outdoors, the socket must stay sheltered behind glass, and the bulb power must never exceed that stated on the model's sheet. A smaller socket limits the choice of bulbs available in outdoor versions.
Which bulb to screw into a garden lamp?
Choose a large screw bulb, suited to the socket's maximum power, and pick the tone according to use: warm for a table, more neutral for moving around. The E14 socket exists on compact formats, but the range of bulbs intended for outdoors is narrower. Table lamps for the living room often share the same socket, for comparison.
Socket exposed to rain: the reflexes
A socket is not designed to receive water directly: the glass, the canopy or a roof overhang protects it. After a shower, wipe around the glass and check that no water stagnates in a hollow of the base. If the socket is damp, cut the circuit before touching it.
How do you wire several lamps on a single electrical supply?
Several lamps can share the same supply if they are connected in parallel from a junction box: each receives the live and neutral. Switch off the power at the breaker, identify the conductors, check the total power of the circuit, and entrust the connection to an electrician at the slightest doubt.
Wiring several lamps in parallel
Parallel wiring means each lamp is powered independently: if one fails, the others stay on. The conductors meet in a junction box, never in a lamp's base. The combined power of all bulbs must remain compatible with the existing circuit.
Wiring 3 lamps to 1 switch
Three lamps on a single switch follow the same principle: the switch cuts the common supply, then each lamp runs from the box. Test each point before closing up, and never open a box without switching off the breaker. For an indoor workspace, design table lamps for the desk connect more simply to a socket.
Where to place a metal outdoor table lamp: floor, table or step?
A table lamp goes where people sit or move: on a garden table, near an outdoor sofa, at the foot of a step to be lit. Avoid pointing it toward the eyes and keep the passage clear. High points take over to light widely, without dazzling those seated.
How to arrange spotlights on the ceiling of a covered terrace
On a covered terrace, spotlights are distributed in regular lines rather than in a circle, at a distance from walls to limit harsh shadows. Align them with the use zones, table and circulation, and keep the same tone as the low lamp. A modern-lined table lamp creates the link with the interior.
Outdoor terrace wall light: complementing the table lamp
The wall light illuminates at shoulder height and frees the floor: it is used near a door or along a wall, while the table lamp stays at table level. Two sources at different heights avoid the single spotlight effect. For bases and volumes, compare with the ceramic bases available indoors.
| Zone to light | Desired effect | Suitable format | Point to check |
|---|---|---|---|
| Garden table | Soft light at plate level | Sphere or small cylinder on base | Stability in wind and height under the tabletop |
| Outdoor seating corner | Low mood, diffused halo | Large tall-stem lamp | Floor footprint and cable length |
| Narrow balcony | Side lighting without nuisance | Compact format, frosted glass | Socket nearby and clear passage |
| Step or path | Discreet visual marker | Small low model, light toward the ground | No glare at eye level |
| Sheltered entrance | Welcome, crisp light | Metal cylinder, clear glass | Rain protection stated on the sheet |
| Covered terrace | Continuity with high points | Discreet lamp, finish close to the spotlights | Consistency of light tones |
How do you protect and maintain a metal table lamp outdoors?
The protection rating is read in two digits: the first concerns solids and dust, the second water. A lamp placed under a canopy and a lamp exposed to the open air do not have the same needs, and the model's sheet gives the value to remember. Maintenance is limited to dusting, wiping the glass and watching for paint chips.
IP rating: reading the two digits
The second digit indicates water resistance: the higher it is, the more the lamp withstands direct exposure. Under a canopy, moderate protection is enough; in the open air all year round, aim higher. Never infer this value from a metallic appearance, only the sheet is authoritative.
Cleaning metal and glass without scratching them
A soft cloth, soapy water then a wipe dry: that is the essentials. Avoid abrasives and green sponges on stainless steel and matte finishes. Check hollows where water can stagnate and touch up a paint chip before it spreads. Indoors, the wood versions simply require dry dusting.
How do you match the outdoor lamp with the lamps in the house?
Keep the same metal family and the same light tone between the terrace and the living room, changing only the format: large model on the floor outside, small format on a piece of furniture inside. Sphere lines and cylindrical shapes travel well from one space to another, especially in a dark finish.
Choosing by light tone, height and metal finish
A dark metal table lamp near the sofa extends the terrace once the windows are closed: same warm tone, same sobriety of line. Look at the black lamps for the living room and the crystal pieces if you are looking for a more dressed contrast. The Nordic lines and the gold and black finishes also play this transition role.
Italian design table lamp: the signs that identify it
Simple volumes, a stable base, a frank material and few ornaments: that is what distinguishes these pieces. A matching small bedroom format or a linen shade to soften the light complete the series without a break. For a more statement piece, look at the white ceramic and the black metal bedside lamps, which take up the metal codes from outdoors.
Frequently asked questions
How do you wire several lamps in parallel?
Each socket receives the live and neutral from the same supply, in a junction box. Switch off the power, identify the conductors, respect the total power of the circuit. If in doubt, an electrician validates the installation.
Which outdoor E27 bulb should you choose?
A large screw bulb is chosen according to the power the socket accepts and the desired tone: warm for a table mood, more neutral for moving around. On a lamp exposed to rain, the socket must stay behind glass or under a canopy.
How do you arrange spotlights on the ceiling of a covered terrace?
In regular lines rather than in a circle, at a distance from walls to avoid harsh shadows. Align them with the table and circulation, and avoid pointing them toward the seats to prevent glare.
Which protection rating for a metal outdoor table lamp?
The first digit concerns solids, the second water. Under a canopy, moderate protection is enough; for direct exposure to rain, a higher rating is required. Each model's sheet gives its value.
Can a table lamp be left outdoors all year round?
Yes if its sheet states protection suited to rain and if its base does not retain water. Avoid hollows where water stagnates, wipe the glass after frosty spells and watch for paint chips on the metal.
A doubt about the format or the socket? Designix customer service answers before purchase. Secure payment, tracked delivery and returns: you order, you try the lamp on the terrace, and the Designix lighting universe stays within reach to complete the interior.





