LED outdoor lighting

Three light sources at different heights are enough to light a terrace: one above the table, a low grazing light on walls or steps, and a third towards the planting. The 7 LED outdoor lights in this collection are then chosen one by one, according to the actual exposure of your terrace and the planned location, not according to the catalogue photo.

What light should you use to illuminate a terrace in the evening?

Plan for three sources at different heights: one above the table for dining, a grazing light along walls or steps for moving around, and a third directed towards the beds. This layering avoids the single point, which flattens the terrace and dazzles those seated.

Outdoor lights for a terrace: where should the light points go?

Above the table, an outdoor pendant usually hangs around 70 to 80 cm above the surface: it lights the plates without sending light into people's eyes. Our canopy pendants mount on a bracket or beam and free up the floor. For steps, choose a low wall light or a grazing spotlight rather than a high point that casts hard shadows. Beam width matters more than power: a narrow beam on a garden table leaves the rest in darkness.

Indirect light or a beam directed at the planting?

Both, but separately. Indirect light bounced onto a stone wall or fence widens the terrace without dazzling; a beam directed at a bed or trunk adds relief. Design pieces for the garden often play this role of a low, sculptural point, placed on the ground rather than fixed to the wall.

Which LED outdoor light should you choose for each location?

The format follows the use: wall light or ceiling light for a covered entrance, floor lamp for a path, recessed ground spotlight to mark a step or bed, pendant under a canopy. Mounting height, beam width and the presence of a sensor matter more than style.

LED outdoor light for facade and entrance

A facade works with two points rather than one very strong one: the beam is better distributed and shadow areas shrink. Under a porch, an outdoor ceiling light rated IP44 minimum is enough; on a wall exposed to rain, go up to IP65. Contemporary models with slim bodies read well on light render.

LED outdoor floor lamp for path and garden

A floor lamp is chosen for its base and anchoring as much as for its light: it stays outside all year and withstands the wind. Floor lamps and bollards mark out a path without lighting neighbouring windows, provided the beam is directed towards the ground.

What IP rating does an outdoor light need?

The IP rating describes resistance to dust and water. Under a sheltered canopy, IP44 is enough; exposed to rain, aim for IP65; at the edge of a pool or in a submersible zone, IP67 or IP68. The figure is read on the product label or in the technical sheet, not on the photo.

Waterproof LED outdoor light: what does IP65 actually mean?

The first digit rates protection against solids, the second against water. An IP65 resists water jets and dust: this is the usual level for an exposed facade light, without immersion. An IP44 only promises splashes. So the word waterproof means something precise, and a closed housing with a bad seal is still an entry point for water.

Outdoor lights for pools: the zone to watch

Around a pool, the general rule is to respect the protection zones defined by the installation standard and to entrust the connection to a professional. Poolside lighting is chosen in IP67 or IP68, and recessed ground spotlights must drain water under the housing.

What colour temperature should you choose for LED outdoor lighting?

The lower the value, the warmer the light: 2700 K for a terrace or garden, 3000 K for a facade, 4000 K for a service path or garage where you want to see clearly. A single temperature per zone avoids patches of colour from one point to another in the garden.

Warm white or neutral white: how does it look on a stone facade?

On stone, warm white around 3000 K brings out beige tones and keeps a welcoming look in the evening. A 4000 K makes the facade whiter and crisper, useful for an entrance you want readable, less flattering on an old wall. LED lighting solutions show this value in kelvins on the sheet: it is the first figure to compare between two models.

Can you mix several temperatures in the same garden?

Better to avoid it within the same view. A 2700 K at the edge of the terrace and a 4000 K on the gate produce two moods that show as soon as you step back a few metres. Keep neutral white for technical areas, garage and gate, visually separated from the garden.

How do you match several outdoor lights to each other?

Keep to one family: same body material, same finish and same colour temperature, then vary the formats. One floor lamp, two wall lights and a few spotlights in the same anthracite or the same white read as a set, whereas six different models scatter the eye.

Modern or design outdoor light: what is the difference?

Modern plays with simple lines and discreet volumes, easy to align along a facade. Design asserts a shape, a contrast of material, a visible sign in the garden. Design pieces for the garden are placed in one or two examples, like an object, rather than as a series. For a calm composition, start from contemporary models and add one strong piece.

Which finish should you choose to blend into the garden?

A planted garden calls for dark or green bodies, which disappear into the foliage once the light is on. Green tones that blend into the beds suit planted borders, black wood bodies suit slatted terraces. On a light wall, white finishes fade away, and beige and sand colours follow stone and render.

How do you install and maintain an LED outdoor light?

Installation follows three rules: switch off the power at the breaker, respect the light's class and the protection zone around a pool, and fit a clean seal when reassembling. For maintenance, a soft cloth and a check of the seals before winter are enough to keep it watertight.

Wireless or wired LED outdoor light: which to choose?

Wireless avoids running a line under a terrace or through an already planted bed, at the cost of recharging or a solar panel, and therefore sometimes less constant light in winter. Wired remains the solution for a fixed point used every day. In both cases, check the electrical class and whether the source or battery can be replaced.

Should outdoor lights be taken down in winter?

No need to remove everything if the light is designed to stay outside. Before the frosts, check the seals, clean the water drainage and tighten the closing screws. A housing that keeps condensation inside signals a worn seal: replace it rather than wait for a short circuit.

Can an LED outdoor light dazzle or disturb the neighbours?

A badly aimed light creates two problems: it dazzles those moving around and it sends light to the neighbour. Direct the beam towards the ground or the wall, choose a diffuser rather than a bare bulb, and keep floodlights for circulation areas, with a sensor or timer.

Motion sensor or photocell for the entrance?

A sensor switches on as you pass: useful for an entrance, staircase or gate, provided it is set neither too sensitive nor too wide, otherwise the light comes on at every moving branch. A photocell switches on from dusk to dawn: it suits a facade or a sign, not an area where no one ever passes. LED garage lighting often combines both.

Where should a floodlight go so it does not light the neighbour's property?

Close to the wall, angled downwards, with a beam that stops before the property line. A floodlight placed high and pointed horizontally mainly lights the other side of the hedge. Original lights with an adjustable diffuser solve this problem without losing character, and a well-chosen high-end piece replaces three badly placed floodlights.

Where can you find an LED outdoor light and what should you check before buying?

In store as online, check the technical sheet before the picture: IP rating, electrical class, colour temperature, dimensions and socket type. A shop that publishes these values and offers reachable customer service avoids returns. Price alone says nothing about how well it lasts.

Lighting shop in Lyon or online order: the same checkpoints

A lighting shop in Lyon lets you see the material and feel the weight of the light, which tells you about the thickness of the aluminium or polycarbonate. Online, you read the sheet and compare values across several models, which is harder on a shelf. In both cases, ask for the socket (GU10 or E27), the electrical class and parts availability.

Lighting clearance in Lyon: how to spot a sound batch?

A batch of clearance lighting in Lyon is judged on the condition of the box, the presence of the instructions and screws, and above all on seals that are still supple. Check that the reference still exists with the manufacturer, otherwise a broken seal or diffuser will be impossible to replace. A clearance piece remains a good choice if the IP rating and class are legible on the label.

Secure payment, tracked delivery, returns and Designix customer service: you order with someone you can reach, and you come back to us if a dimension does not match your wall. Browse all our lights to get a sense of the formats, or go straight to the complete lighting catalogue and its detailed sheets. Select your location, note the IP rating and colour temperature, then confirm your basket.

Frequently asked questions about LED outdoor lights