LED Neon
This selection is also available in our French store: Néons LED
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?
An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Plan for one LED neon strip every 60 to 120 cm of workbench or countertop, aligned with the ceiling to light without dark zones. An LED neon strip is a tube or batten with diodes that switches on instantly, with no starter or ballast, and fits the same type of support as a fluorescent tube.
What is an LED neon strip and how does it differ from a fluorescent tube?
LED tube and fluorescent tube: what changes
A fluorescent tube lights after a short wait and loses brightness when cold. An LED tube starts immediately, keeps its output stable and contains no mercury. The LED fluorescent replacement keeps the same shape and lengths, but the source behind the diffuser is a string of diodes. The difference shows most in daily use: no flicker at end of life, and light that stays identical from first switch-on to last. If you are comparing families of fixtures, comparing light fixtures helps place the LED neon strip against other sources.
Rigid LED neon strip or flexible LED neon strip
A rigid LED neon strip is a tube or batten: it mounts straight, on the ceiling or under a shelf, and gives a crisp line. A flexible LED neon strip bends, follows an angle, hugs a niche or a ceiling return. The first suits work rooms, the second suits free shapes and indirect lighting. In every case, choose the use first, then the material of the support.
LED neon strip, LED ceiling light, LED chandelier or LED wall light: which to choose?
An LED neon strip lights wide and evenly: garage, workshop or kitchen. An LED ceiling light, often chosen for a modern living room, gives direct light at the centre of the room. An LED wall light illuminates without cluttering the floor, and an LED chandelier adds a decorative pattern above a table. The choice depends on what the room must do, not on fashion. For a complete interior, the whole lighting range lets you match everything.
| Fixture | Type of light | Most suitable room | What it changes |
|---|---|---|---|
| LED neon strip or LED tube | Wide and even, direct | Garage, workshop, kitchen | Lights a large surface without dark zones |
| LED batten | Direct, under cabinet | Kitchen, countertop | Lights the prep area without body shadow |
| LED ceiling light | Direct, at the centre of the room | Living room, bedroom | Provides general light and structures the ceiling |
| LED chandelier | Diffuse, decorative pattern | Living room, dining room | Becomes the focal point above the table |
| LED wall light | Grazing or indirect | Hallway, living room, bedroom | Lights the wall without using floor or ceiling |
| LED strip and flexible neon | Continuous line, indirect | Niche, cabinet, ceiling perimeter | Follows curves and outlines a shape |
Powerful LED ceiling light or modern LED ceiling light: for which living room?
A powerful LED ceiling light suits a large room or a living room with a high ceiling: it carries the general light with no other source. A modern LED ceiling light, flatter, stays discreet under a low ceiling and lets the decor breathe. In both cases, look at the light colour before the style. For living areas, light fixtures for the living room groups the formats that suit them.
Powerful LED wall light or LED chandelier: what effect in the room?
A powerful LED wall light lights a wall, frames an artwork or replaces a fixed bedside lamp. An LED chandelier, for its part, occupies the centre and becomes the focal point above a table. A modern LED wall light plays the decorative gesture, a chandelier structures the room. An LED bulb or an LED lamp can complete the set when a single light point is not enough.
Which LED neon strip for which room: garage, workshop, kitchen or bedroom?
LED neon strip garage and LED batten garage: what light for working?
In a garage or workshop, you want even light, with no shadow cast under the car or on the workbench. An LED neon strip mounted on the ceiling, aligned at several points if the room is long, fills this use better than a decorative fixture. For the workshop, a fixture for the workshop groups the formats designed for work.
LED batten kitchen and LED for bedroom: what intensity?
In a kitchen, the LED batten goes under the wall units and lights the countertop without casting your body shadow. In a bedroom, a soft, diffuse light is preferred, dimmable if possible, to avoid glare on waking. A short under-cabinet LED neon strip does the same job as a batten, in a linear version. See also a fixture for the kitchen for the prep area.
In short, by room: garage and workshop call for a long format fixed to the ceiling or on a rail, with even light and no black spots. Kitchen: short under-cabinet format, protected from vapours. Bedroom: flexible or indirect format, in warm white. Hallway and entrance: linear ceiling format, for continuous lighting. Covered terrace: sealed format, high protection rating, sheltered from direct rain.
LED neon strip 60, 120 or 150 cm: which length to choose?
Length aligns the lighting with the support: a short format suits a narrow counter, a long format lights a large table or a whole wall. You can also align several tubes of the same length to cover a room lengthwise, keeping a regular gap between them.
| Type | Common format | Cap | Replaces |
|---|---|---|---|
| T8 LED tube | 60, 120 and 150 cm | T8 | A T8 fluorescent tube of the same length |
| T5 LED tube | Slim linear tube | T5 | A T5 fluorescent tube |
| S19 tube | Long linear tube | S19 | A linear tube with the same cap |
| R7S tube | Linear with end sockets | R7S | A linear tube with the same cap |
| Flexible LED neon strip | Length adjusted on site | Low-voltage supply | An LED strip or profile |
| Cuttable LED strip | Cuts at the marks | Connector or solder | A fixed indirect light |
LED neon strip 120 cm: for which rooms?
The 120 cm format covers a countertop, a wall unit or a standard workbench. It is the most versatile length: long enough to light without gaps, short enough to mount alone in a small room. A 120 cm LED tube often replaces an old fluorescent tube of the same length.
LED neon strip 150 cm: when to go for the long format?
The 150 cm LED neon strip takes over on a large table, a whole wall or a wide workshop. Align it with other tubes when the room stretches, keeping the light points close together to avoid shadow zones between two sources.
Can a neon strip be replaced by an LED tube?
Yes, in most cases: an LED tube replaces a fluorescent tube with the same cap and the same length, T8 or T5 for example. Depending on the model, the starter or ballast must be removed, or the tube is designed to run directly on the existing installation. Always check the cap and the length before ordering.
T8, T5, S19 and R7S caps: what compatibility?
The T8 cap is the most common in garages and technical rooms; T5 is slimmer and often used in linear or under-cabinet setups; S19 and R7S concern linear tubes with end sockets. Two things count: the cap and the length. A tube with the right cap but a different length will not fit.
Should the ballast or starter be removed?
It depends on the LED tube model. Some run on the original installation, others require removing the starter or bypassing the ballast. This is stated on the product sheet of the tube concerned; if in doubt, read that sheet before ordering, or have the installation checked by an electrician.
Cuttable LED strip: how does it work?
A cuttable LED strip is cut at the marks printed on its backing, then connected with a connector or solder: the part you keep keeps working. Choose a cuttable one to adjust the length precisely, in a niche, a cabinet or around a ceiling perimeter.
Flexible LED neon strip: where to place it?
IP protection rating: indoor, kitchen, sheltered outdoor
The IP rating describes resistance to dust and moisture. In a dry room, a standard rating is enough. Under a kitchen cabinet or in a bathroom, go up one level to withstand splashes. Outdoors but sheltered, a high rating such as IP68 concerns immersion and heavy moisture; it remains unnecessary in a dry interior. For the general lighting of a home, home lighting groups the fixtures suited to each room.
What is the best lighting for a workshop or garage?
For a workshop or garage, the light must be even and free of shadow on the work surface: several LED neon strips aligned on the ceiling give a better result than a single very powerful source. A light close to neutral white makes colours and details easier to read day to day.
LED batten garage or LED neon strip: what light for working?
The LED batten garage mounts quickly and lights straight below it; the LED neon strip covers wider. For a workbench, align the sources above the surface rather than at the sides: you remove the shadow of your own hands on the piece in progress. An LED neon strip workshop often completes a batten for long zones.
How many light points to plan?
Plan several distributed points rather than one powerful one: two or three sources aligned along the length of the workbench, evenly spaced, light better than a single central fixture. An LED ceiling light can complete the set for the general light of the room. To compare families, choosing a fixture suited to the room gives useful guidelines.
Custom LED neon strip: which colour and which light temperature?
Colour temperature changes the mood: warm white warms a bedroom or living room, neutral white stays versatile in a living area, cool white suits a garage, workshop or shop window better. For a custom LED neon strip, choose the shape, the length and the light colour according to the room.
Warm white, neutral white or cool white: what result?
Warm white, around 2700 to 3000 kelvins as a general guide, gives a golden, restful light, suited to a bedroom or a reading corner. Neutral white, around 4000 kelvins, stays balanced and suits a living area or a kitchen. Cool white, above 5000 kelvins, keeps a crisp light for work. An LED for bedroom is chosen more among the first, a workshop neon strip among the last.
Decorative LED neon strip for a bedroom or a shop window
In a bedroom, mount the neon strip indirectly, behind a headboard or around the ceiling perimeter, for soft light without glare. In a shop window, the continuous line highlights products and draws the eye without aggressive frontal lighting. To go further, our selection of light fixtures covers both uses.
How to install and maintain an LED neon strip?
An LED neon strip is fixed to the ceiling, as a wall light or on a support, with screws suited to the wall material, then connected to the supply provided for the room. For maintenance, a soft cloth is enough: cut the power before cleaning and check the protection rating in a damp room.
Ceiling mounting, wall mounting or on a rail
First identify the nature of the support: plasterboard, concrete or wood do not need the same screws or the same plugs. Then mount the fixture straight, aligning the light points of the same room. A rail makes later adjustments easier, the wall light suits narrow hallways. This is also what separates successful ceiling LED lighting from a rough job.
Maintenance and safety: IP rating, supply, cleaning
Always cut the power at the breaker before working. Dust with a soft cloth, with no abrasive product on the diffuser. In a damp room, check that the protection rating of the fixture matches the use. The strip and flexible neon are connected according to the model's instructions; if in doubt, call an electrician.
To equip a complete room, Designix light fixtures combine with an LED chandelier in the living room and a modern LED wall light in the hallway. Also see the Designix lighting catalogue if you are looking for several sources for the same room.
Frequently asked questions about LED neon strips
Can a neon strip be replaced by an LED tube?
Yes, in most cases: a fluorescent tube is replaced by an LED tube with the same cap and the same length, in T8 or T5 for example. Depending on the model, the starter or ballast must be removed, or the tube is designed to connect directly to the existing installation.
What is the best lighting for a workshop?
A workshop needs even light with no shadow on the work surfaces: several LED neon strips or LED battens aligned on the ceiling are better than a single concentrated source. Neutral white helps distinguish colours and details during work.
How does a cuttable LED strip work?
A cuttable LED strip is cut only at the marks printed on its backing, then connected with a connector or solder, and the part you keep keeps working. This is what allows the exact length to be adjusted in a niche, a cabinet or around a ceiling perimeter.
Which LED neon strip for a garage?
In a garage, you want wide, even light, with no dark zone under the vehicle or on the workbench. An LED neon strip or LED batten fixed to the ceiling, at several points if the room is long, fills this use better than a decorative fixture.
LED neon strip 120 cm or 150 cm: which length to choose?
Length is chosen according to the support to be lit: a 120 cm LED neon strip suits a countertop or a wall unit, a longer format such as the 150 cm LED neon strip lights a large table or a whole wall. Several tubes can also be aligned.
See the full lighting collection to continue your project, or return to the lighting catalogue if you are first looking for an LED ceiling light, an LED chandelier or an LED wall light. Continue with the other light fixtures lets you compare formats before making your choice.





