IP65 table lamps
This selection is also available in our French store: Lampes à poser IP65
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
IP65 means two things: the luminaire is completely dust-tight (the 6) and it withstands water jets projected from all directions (the 5). An IP65 lamp can therefore live on a vanity unit, under an awning or near a sink, but must never be immersed.
- What the IP65 rating protects against
- Where to install an IP65 lamp
- Socket, material and format
- Iconic lamps and Italian design
- Industrial, floor, Nordic
- Wiring several lamps
- Ceiling spots and outdoor installation
- Care and ordering
What is an IP65 lamp and what exactly does this rating protect against?
The 6 covers solids: no dust enters the luminaire, including fine powders. The 5 covers water: the lamp resists a jet projected from all sides, like a tap opened thirty centimetres away. Nothing more: no immersion, no pressure washer, no insistent shower steam.
IP65 lamp: what this rating really covers
The protection relies on two discreet parts: the gasket sealing the cable entry and the one on the socket or diffuser. If either is pinched during installation or hardened by limescale, the stated rating is worthless in the field. This is why a well-designed model stays easy to open for changing the bulb.
| Rating | Protection against solids | Protection against water | Typical use |
|---|---|---|---|
| IP20 | Fingers, objects over 12.5 mm | None | Bedroom, office, dry living room |
| IP44 | Objects over 1 mm | Splashes | Bathroom, vanity unit |
| IP65 | Total dust | Water jets from all directions | Covered terrace, sheltered balcony, kitchen near the sink |
| IP67 | Total dust | Temporary immersion | Highly exposed outdoors, regularly wet room |
IP44 or IP65 lamp: what is the difference for the bathroom?
IP44 stops splashes rising from the washbasin, which covers most vanity units. IP65 adds resistance to direct jets: near a shower or a bathtub rim, that is the one to choose. Many bathrooms only need IP44, and this nuance opens up more materials, especially glazed ceramic lamps.
Where to install an IP65 lamp: bathroom, terrace or kitchen?
Three zones justify an IP65: the vanity top of a bathroom, a sheltered terrace or balcony corner, and a kitchen worktop less than a metre from the sink. Everywhere else, air humidity stays low and an unprotected luminaire does the job without material constraints.
IP65 lamps for terrace, balcony and garden
A covered terrace stays wet from driving rain and from cleaning the floor. An outdoor lamp benefits from a base heavy enough not to tip over in the wind and a plug connected to a protected circuit. On a balcony, a compact format placed on a shelf is preferable to one on the floor, in the walkway.
Is an IP44 lamp enough in the bathroom?
Yes, as long as you stay away from the shower jet: around the washbasin, an IP44 table lamp holds up. Near the bathtub or in the water zone, go up to IP65 and choose a fixed or very stable model, so that a sudden movement does not send it to the floor.
| Room or zone | Rating to aim for | Type of lamp | Point to check |
|---|---|---|---|
| Bathroom, around the washbasin | IP44 minimum, IP65 near water | Table lamp or bedside lamp | Distance to the shower |
| Shower and bathtub | IP65 | Compact lamp, integrated LED | Mounting and condition of the gasket |
| Covered terrace or sheltered balcony | IP65 | Floor lamp or table lamp | Protected plug, cable out of the walkway |
| Kitchen, worktop | IP44 to IP65 | Adjustable lamp or table lamp | Cleaning and grease |
| Bedroom and office | IP20 | Bedside lamp, desk lamp | Height relative to the surface |
| Hallway and garage | IP44 to IP65 | Sturdy metal table lamp | Knocks and dust |
How to choose among IP65 lamps: socket, material and format?
Decide in this order: the light source, then the material compatible with humidity, then the format measured on the furniture. Choosing the other way round leads to a lamp that is too wide or a bulb that cannot be found, and you have to start over.
E27 socket or integrated LED: what it changes day to day
An E27 socket lets you replace the bulb and adjust the colour temperature: around 2700 K for warm evening light, near 4000 K for a kitchen where you work. An integrated LED avoids this question but makes the luminaire dependent on its electronics. The smaller E14 socket suits compact bedside lamps; design LED lamps show what a well-housed integrated source looks like.
Metal, ceramic, wood or glass: which material for a damp room?
Lacquered metal and glazed ceramic withstand humidity without marking. Raw wood needs a finish and is better placed under an awning than in a bathroom. Opal glass diffuses without glare. For a work station, adjustable lamps set the direction of the beam and avoid lighting empty space.
Which iconic lamps and Italian design lamps should you choose?
A luminaire of this kind is recognisable by its simple curves, its discreet base and its clean finish. It acts as a focal point on a console or a low sideboard, switched on or off, without needing to be spectacular.
Design globe lamp: why this shape crosses all styles
The sphere encloses the source and returns a soft light in all directions: perfect for atmosphere, insufficient for reading. It sits as well in an old interior as in a contemporary living room, which explains its longevity. Allow a sufficient diameter so that the sphere does not look lost on a large piece of furniture.
The most beautiful living room lamps: which criteria to consider before choosing
There is no objective ranking. Look instead at the height of the shade relative to the seat, the colour of the light, and the actual space on the furniture. A character piece is chosen for how it looks when lit; crystal pieces and modern living room lamps meet two very different desires.
In terms of styles, four families are quickly spotted: Italian design (curves, lacquered metal, opal glass), industrial (exposed structure, visible bulb), globe (diffuse and even light) and Nordic (fine lines, light wood, soft whites). A fifth profile, the adjustable lamp, serves work more than decoration.
Industrial lamps, floor lamps, Nordic style: how to find your way?
The industrial lamp shows its structure and its bulb, the floor lamp raises the light to seat height, the Nordic style stays sober. The right choice depends on the height of the furniture to be lit and the space available on the floor.
Industrial lamps: metal, grille and visible bulb
The principle is to hide nothing: steel or cast iron, visible screws, a filament bulb on show. This type of lamp lights little to the sides and a lot downwards, which suits a kitchen or an office. Metal desk lamps take up the same logic in a more contained format.
Floor lamps: when the light needs to rise higher
A floor lamp takes up space on the floor but frees the furniture and places the source near the shoulder, which makes reading comfortable. It also lights a corner of the living room without drilling a wall. The Nordic style offers fine versions in light wood, easy to slip behind a sofa.
How to connect several lamps to a single electrical supply?
Several lamps are connected in parallel on the same supply: each socket starts from the live, neutral and earth, never chained from one lamp to the next. The total power must remain compatible with the circuit and its breaker. Beyond these basics, an electrician validates the assembly.
In parallel, each lamp receives the same voltage and keeps working if another fails. For three lamps controlled by a single switch, gather the live wires on one side and the neutrals on the other, in suitable terminals or connectors, then check the combined power before closing up. Wiring is always done with the power off, and the earth terminal is never removed on a metal luminaire.
How to arrange ceiling spots and install your lamp without mistakes?
To distribute spots, count the points according to the surface, space them evenly and keep a distance from the walls. To install an IP65 lamp outside, check the gasket and the plug before switching on.
How to arrange ceiling spots in a living room?
Even spacing avoids light patches and dark zones. Keep the points away from the walls, avoid placing one directly above a worktop or a screen, and distinguish the zones: circulation on one side, reading on the other. The table lamp complements this background light rather than doubling it.
Installing an IP65 lamp outside: plug, gasket and earthing
The plug must be protected and the cable kept out of the walkway, clipped or fixed against a post. Check that the gasket is not pinched when tightening, keep the earth on a metal body, then test the light before leaving the luminaire exposed. A model with a stable base resists the wind better than a light lamp placed on a shelf.
How to care for an IP65 lamp and order with confidence?
A soft, slightly damp cloth is enough. Avoid abrasive products that harden the gasket and check once a year that it is not cracked: a worn gasket loses the protection even if the lamp still lights normally.
Cleaning an IP65 lamp without damaging the gasket
Unplug before cleaning, wipe without soaking, and let dry before reassembling. Limescale marks come off with warm water, without concentrated vinegar on metal parts. A blackened or cut gasket is replaced; it is the wear part of the luminaire.
Paying, receiving and returning an IP65 lamp
Payment is secure, delivery is tracked and returns are possible; the Designix customer service answers before and after purchase. Once the piece and the format are decided, the simplest is to browse the Designix lighting catalogue to compare silhouettes at equal height. For a bathroom, a living room or a bedroom, design lamps for the living room, models designed for the bedroom and ceramic bedside lamps give a concrete starting point. If you hesitate between two finishes, black finishes for the living room and wooden lamps show two opposite directions. For a work corner, look at design desk lamps, and for a textile light, linen shades.
One last useful reference before confirming: measure the clear height between the furniture and the shelf above, then remove a few centimetres. A lamp that is too tall will not fit, a lamp that is too low does not light the worktop. Then browse all our luminaires with these two figures in hand, and keep in mind that style should serve use: diffuse for atmosphere, directed for a task.
For installation details in a wet room or on a terrace, the questions below cover the most frequent cases.
What is the difference between a floor lamp and a table lamp?
A floor lamp rests on the floor and raises the light to seat or shoulder height; a table lamp is placed on furniture and lights closer to the worktop. Both can be IP65 protected for sheltered outdoor use. The choice depends mainly on the floor space available.
What is a design globe lamp?
It is a lamp whose source is enclosed in a sphere, in glass, opal glass or metal. The light comes out diffuse, without a marked direction: it is an atmosphere lamp more than a reading lamp. It is placed on furniture or a shelf, and its diameter must remain proportionate to the furniture.
What is an Italian design lamp?
It is a style, not a guaranteed origin: simple geometric shapes, generous curves, lacquered metal or glass, discreet shade. These lamps seek a balance between sculptural object and useful light, and are placed on furniture or a console. They serve as a focal point without dominating the room.
How to wire 3 lamps to 1 switch?
The three lamps are connected in parallel and then linked to the same switch: it cuts the common live wire, which turns all three off at once. Check the combined power and the compatibility of the circuit before closing up. Switching off the power is mandatory, and an electrician decides in case of doubt.
How to arrange ceiling spots?
Distribute the spots evenly taking into account the surface and the ceiling height, keeping a distance from the walls to avoid light patches. Avoid placing a spot directly above a worktop or a screen. A table lamp then complements the zones that need more precision.





