Industrial-style LED neons
This selection is also available in our French store: Néons LED style industriel
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Think of a continuous line of light rather than a single point source: an industrial LED strip light illuminates a worktop or a wall in one piece, with no dark zone between two points. First choose the length to cover and the mounting, wall-mounted or suspended, then the mood, warm white or neutral white.
What kind of light does an industrial LED strip light give?
An industrial LED strip light emits linear light, spread over the whole length of the tube: the wall or worktop is lit in one piece, with no dark zone between two sources. The result stays crisp, close to white, and is chosen in warm white for a cosy mood or in neutral white for working.
Direct or diffused light: what changes on the wall
An exposed tube sends light straight ahead: the wall receives a crisp line, reliefs stand out, and the worktop is bright directly below the tube, darker at the sides. A diffuser fitted over the tube softens the transition and removes glare when you work right underneath. In a kitchen or a workshop, direct light makes movements safer; in a passage, the diffused version keeps the source out of your eyes. Both results feature among the linear lights of the home.
Industrial LED strip lights: the effect of a continuous line in the room
Set along a wall, the strip draws a horizontal or vertical line that structures the space without taking up floor area. It is this line that gives the workshop look, more than the colour of the metal. As a general rule of thumb, warm white sits around 2700 to 3000 K, neutral white around 3500 to 4000 K: a soft strip in the evening, a crisp strip for cooking. These two colour temperatures remain the only criteria really visible day to day, and they are found in industrial style lights.
Where to install an industrial LED strip light in the home?
An industrial LED strip light goes where the light must follow a line: above a kitchen worktop, along a workshop wall, in a corridor or above a bar. Suspended, it suits tall rooms; wall-mounted, narrow passages.
Kitchen and workshop: lighting a worktop
Above a worktop, the strip is fixed under the wall units or wall-mounted on the wall, at a height that does not cast a shadow on your hands. The simple rule: the line of light follows the edge of the worktop, not the back of the wall. In the workshop, the same logic applies to the bench, with a longer tube and a chain suspension to clear the surface. The table below sums up the useful formats, and lights for kitchen and worktop let you compare lengths.
| Room or use | Recommended format | Type of light | Mounting |
|---|---|---|---|
| Kitchen, worktop | Short, slim strip | Neutral white, direct light onto the worktop | Wall-mounted under the wall units |
| Workshop, garage | Long linear tube | Neutral white, crisp result for working | Chain or cable suspension |
| Hallway, corridor | Short strip mounted on the wall | Soft light, no frontal glare | Horizontal wall mounting |
| Loft, living room | Long strip in a continuous line | Warm white for atmosphere | Suspended high |
| Shop, display window | Wall-mounted or framed strip | Even light on the wall | Wall fixing or free-standing frame |
Corridor, hallway, display window: the strip as a wall light
In a corridor, a wall-mounted LED light usefully replaces a ceiling source: it lights the wall over its whole length and visually enlarges a narrow passage. Fit it at shoulder height rather than right up against the ceiling, to avoid the strip-light effect. In a display window, the same principle sets off merchandise from the background; lighting for corridor or hallway gives length guidelines according to the surface.
How to choose the length and mounting of an industrial LED strip light?
The length is chosen according to the surface to cover: a short strip is enough for a worktop or a hallway, a long model for a workshop wall or a living room. The mounting decides the rest: wall-mounted for a close light, suspended to light a table or an island.
Strip length: follow the line to be lit
Measure the useful line, not the room: the length of the wall units in the kitchen, the width of the bench, the run of the wall in a corridor. A shorter tube leaves two dark zones at the ends; a longer tube overhangs and lights what does not need it. For an island or a table, the length of the light is generally set at two thirds of that of the surface. Linear models can be compared in pendants and wall lights.
Wall mounting or suspension: height and wiring
Wall-mounted, the strip is screwed onto a solid support, at a height that leaves the passage clear and the eye out of the beam. Suspended, allow an adjustable cable height to fine-tune once the furniture is in place, never a taut cable without load bearing. Plan the power supply before installation: a cable outlet high up avoids having to extend it later. For a workstation, choosing a light for a workshop helps decide between the two setups.
LED strip light, industrial chandelier or LED ceiling light: which light to choose?
An industrial chandelier hangs from the ceiling and concentrates the light in the centre of the room; an LED ceiling light lights widely but without relief; the industrial LED strip light follows a wall or a worktop. A large industrial chandelier needs height; for a corridor, the strip remains simpler.
LED living room chandelier: when to prefer it to a strip
An LED living room chandelier makes sense when the room is tall and when the light must fall in the centre, above a table or a reading corner. It occupies the volume, is seen from afar and becomes a decorative element. The strip, on the other hand, blends into the wall and leaves the centre free: in a living room with a low ceiling, a light suited to a low room will be more comfortable than a chandelier.
Large industrial chandelier or linear strip: decide according to the room
A large industrial chandelier requires ceiling height and a clear passage underneath, otherwise it gets in the way. A linear strip does not descend into the volume: it suits corridors, kitchens, workshop walls and low rooms. The two can coexist, the chandelier for atmosphere in the centre, the strip for working light on one side. The following table sets out the differences, and lights for loft and living room show both families side by side.
| Criterion | Industrial LED strip light | Industrial chandelier | LED ceiling light |
|---|---|---|---|
| Footprint | A line along a wall or above a surface | Hangs from the ceiling, occupies the central volume | Flush with the ceiling, almost invisible |
| Type of light | Linear and even, without interruption | Concentrated at several points | Wide and diffuse, little relief |
| Ceiling height | Suits low as well as high rooms | Requires ceiling height | Suits low rooms |
| Style | Exposed tube, understated structure, workshop look | Metal assembly and mechanical shapes | Discreet, blends in |
| Maintenance | Dusting the tube when switched off | Cleaning each light point | Simple, direct access |
| Typical use | Kitchen, workshop, corridor, display window | Tall living room, hallway, staircase | Small room, circulation |
How to make an industrial pendant light?
An industrial pendant light is made around a support fixed to the ceiling, a cable or chain and an LED tube held by two brackets. First choose the length of the tube, then the suspension height, and check that the support bears the weight of the whole assembly before installation.
Choosing the tube and the brackets
Start from the LED tube and its useful length, then take two brackets that grip it without squeezing it, one on each side. The suspension cable or chain is chosen for its load capacity, not for its look alone: it is what holds the assembly. Plan the power supply directly below the support to avoid a wire crossing the room. For a simple setup, browsing the lighting catalogue often saves you from assembling everything yourself.
Adjusting the height and securing the fixing
First fix the support to the ceiling, into a solid material or with an anchor suited to the ceiling you have, then adjust the height before connecting. Keep the tube out of reach in a passage, and above eye level for a worktop. Check the load bearing before switching on, then a second time after adjustment.
How to replace a recessed LED spotlight in the ceiling with a strip?
Switch off the power at the circuit breaker, remove the recessed spotlight, then note the supply wires before connecting them to the new light. If the strip is surface-mounted, the old hole is filled in; installation requires a solid support and a height that does not obstruct the passage.
Removing the spotlight without damaging the ceiling
Locate the spring or clips holding the spotlight, pull gently downwards, then unplug the connector. The hole stays clean if you slide a blade under the edge rather than forcing at the centre. Note the position of the wires before releasing them, and check that a solid support is nearby for the new fixing. see all the lights of the home helps choose a surface model rather than a second recessed one.
Connecting and checking before switching the power back on
Connect live, neutral and earth according to the light's terminal block, tighten the screws, then pull gently on each wire to check it holds. Fill in the old hole if the strip is surface-mounted, with a support that accepts the fixing screws. Switch the power back on only after closing the connections, and test the light before fixing everything.
How to fix and maintain an industrial LED strip light?
The strip is fixed to a solid support, wall or ceiling, with the brackets intended for its weight; avoid hanging it from a cable alone. Maintenance is limited to dusting the tube when switched off with a soft cloth, without abrasive product, to keep the same light intensity.
Height and stability of the fixing
Check the nature of the support before drilling: plasterboard, concrete or wood do not call for the same anchor. The strip must stay firmly attached to the wall or ceiling, without play, and the cable must never bear the light. In a shop or a display window, the same rule applies, with a height that sets off the merchandise. Models intended for these volumes are found in lighting for shop and display window.
Cleaning the tube without damaging it
Switch off the power, let it cool, then wipe the tube and structure with a soft, dry cloth. An abrasive product or a damp cloth on the electrical parts dulls the diffuser and wears the seals. Two passes a year are enough in a living room, a little more in a dusty workshop.
For your purchase, the Designix shop offers secure payment, tracked delivery, returns and a customer service you can reach to confirm a format before ordering. Compare lengths in the Designix lighting range and keep the model sheet to hand when drilling.
Frequently asked questions about the industrial LED strip light
LED living room chandelier: what should you check before choosing one?
First look at the ceiling height, then at the space left for the passage: a chandelier hangs down into the room and must stay out of reach. Also check that the light falls in the right place and that the style matches the rest of the living room.
Which LED ceiling light to choose when the room is low?
An LED ceiling light flush with the ceiling suits low rooms because it does not descend into the volume. Favour a model that spreads light widely to avoid shadow zones, and keep the linear LED strip for lighting a wall or a worktop.
Industrial style chandelier or LED strip: what to choose for a living room?
An industrial style chandelier structures the centre of the room and requires ceiling height. The industrial LED strip light suits if you want to light a wall, a piece of furniture or a surface without occupying the central volume. The two can coexist, with different roles.
Industrial chandelier: what is the difference with an industrial LED strip light?
The industrial chandelier hangs from the ceiling and spreads the light over several points; the industrial LED strip light follows a line, on the wall or above a worktop. The first lights the centre of a tall room, the second lights a long, narrow surface.
Can a powerful LED wall light replace a strip?
An LED wall light lights a wall or a passage, but it concentrates the light on one zone, whereas an industrial LED strip light spreads it over its whole length. For a continuous worktop, the strip remains more even; the wall light is better suited to a hallway or a corridor.





