Powerful LED projector
This selection is also available in our French store: Projecteur LED puissant
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A high power LED floodlight is chosen on three benchmarks: lumen output, beam angle and ingress protection rating. Aim the unit at the surface to be lit, above eye level, and size the power on the actual surface rather than on an idealised distance.
- Which light gives the most light
- The selection criteria
- Facade, courtyard or garden
- The motion sensor
- Portable and rechargeable
- Solar or mains-powered
- The connection
- Height and orientation
- When a floodlight is not the answer
Which light gives the most light?
A high power LED floodlight is chosen on precise criteria, but this collection contains no products at the moment. Lumens and beam angle therefore cannot be compared here, for lack of available references.
Comparison means nothing without the angle: a narrow beam concentrates the lumens on a small spot, a wide beam spreads them out. Two units of the same power can produce very different light on the ground.
Professional high power LED outdoor floodlight
A professional model is fixed to a wall or a pole, with a bracket and screws suited to the support. Its reach depends on the mounting height and the tilt: the higher it is, the larger the spot and the lower the intensity. For a facade, the outdoor floodlight family covers common wall fixings.
What a directed light changes
Directing the light brings out the relief of a wall, a hedge or a path, and leaves the rest in shadow. Badly aimed, it dazzles the person receiving it and casts hard shadows. The range of LED floodlights is chosen first on this act of orientation.
How to choose a high power LED floodlight?
Start from the surface to be lit and the mounting distance, then choose the power, the beam angle and the ingress protection rating suited to rain exposure, and finally the power supply: mains, battery or solar. Fixing and orientation count as much as the stated power.
High power 500 W LED floodlight: in which cases?
A power of this order concerns a large plot, a farm building, a car park or a building site, where the surface to cover is vast and the mounting high. For a house courtyard or a path, it dazzles and consumes for nothing: a more modest unit, well aimed, does the job.
The protection rating, a criterion for outdoor lifespan
A unit intended to stay outside shows an IP rating on its data sheet. The higher the figure, the better the housing resists dust and water jets. Watertight units are the right reflex for an exposed facade or a pond edge.
Which high power outdoor LED floodlight for a facade, a courtyard or a garden?
A facade calls for a beam directed downwards to reveal the material without dazzling; a courtyard or a path gains from a sensor model that switches on as you pass; a garden is content with a narrow beam placed on the ground or high in the planting. The area dictates the angle before the power.
| Area to light | Recommended type | Decisive criterion | Where to fix it |
|---|---|---|---|
| House facade | Tiltable fixed floodlight | Beam downwards, outdoor protection | Under a canopy or high on the wall, above eye level |
| Path, gate, entrance | Floodlight with sensor | Detection field aimed at the passage | Wall corner, traffic side, away from headlights |
| Garden, tree, planting | Narrow-beam floodlight | Precise aiming at the plant | On the ground on a spike or high in the planting |
| Garage, workshop, utility room | Floodlight for work interiors | Wide, even light, stable fixing | Ceiling, above the work surface |
| Building site, repairs, boat | Rechargeable or stand-mounted floodlight | Stated runtime, stable stand | On the ground, aimed at the work area |
| Terrace, pond | Watertight floodlight | Watertightness and chlorine-resistant material | On the perimeter, never facing bathers |
Lighting a facade without dazzling the neighbours
A grazing beam, tilted downwards, underlines the material without sending light to the neighbour. Wall floodlights are mounted above eye level, which settles most of the glare.
Lighting a tree, a path or a gate
On a plant, a narrow beam placed on the ground gives volume to the branches. For a path, allow one point at the start and another at the gate: garden lighting is dosed in visible markers, not in raw power.
High power LED floodlight with motion sensor: how does it work?
The sensor detects a heat movement in its field and switches the floodlight on for an adjustable duration. It is used for passages: entrance, path, wall corner. Aim it at the traffic area, never at a busy street or a heat source, to avoid repeated switching.
Setting the hold time and the sensitivity
Two settings make the difference: the hold time, which sets the lighting duration after the passage, and the sensitivity, which doses the detection distance. Start with a short hold time to check the coverage, then lengthen it. Floodlights with an integrated sensor are set from the housing.
Mounting mistakes that make the floodlight blink
A sensor pointed at the street, a passing car, a reflection on a window or a radiator in the field trigger pointless switching. Mounting too high also reduces the useful range. Motion sensor models call for a night test before final fixing.
Portable or rechargeable high power LED floodlight: for which uses?
The rechargeable model is carried where there is no socket: building site, garage, repairs, boat deck. Look at the stability of the stand, the handle, the stated runtime and the watertightness if the unit stays outside. The mains version remains simpler for a fixed point.
High power LED floodlight for building sites
On a building site, priority goes to the stable stand and the handle: the unit is set on the ground, aimed at the work area and does not tip over when an extension lead passes. Rechargeable floodlights avoid running a cable across traffic areas.
High power LED floodlight for boats: what to check
On a deck, spray attacks the screws and seals. Choose a watertight housing, a fixing that holds despite the rolling and a handle to bring it in. Stand-mounted floodlights find their place on the pontoon or in the harbour workshop.
Solar or mains-powered high power LED floodlight: which to choose?
Solar avoids any connection: panel, battery and sensor are integrated. It suits intermittent use, a path or a gate, in an open and well-exposed area. Mains remains the safe choice for a strong and continuous light, on a facade or a building.
Professional solar high power outdoor LED floodlight
Integrated solar suits a path, a gate or a shelter without connection. The light remains dependent on the accumulated charge. For a strong and continuous LED outdoor lighting on a building, mains keeps the advantage.
What limits a solar floodlight in winter
Fewer hours of sunshine, a panel covered in frost or leaves: the charge drops and the unit lights for less time. The battery also ages faster in the cold. For a fixed point all year round, a mains-connected luminaire remains the safe bet.
How to wire a high power LED floodlight?
Switch off the power at the breaker, check the cable cross-section and connect in a junction box with a cable gland: live, neutral and earth, then restore the watertightness. For an outdoor unit, the connection must be protected and the circuit dedicated; if in doubt, an electrician steps in.
Preparing the support and drilling the wall
Locate the conduit runs before drilling, present the bracket and mark the holes in pencil. Plug and screw must match the support: concrete, hollow brick and wood cladding do not call for the same fixing. A badly anchored floodlight vibrates and ends up tearing out its support.
What must remain accessible after mounting
The junction box and the cable gland remain accessible for a check, without being exposed to run-off. The connection is made with the power off, earth included, then the watertightness is restored at the seal. In a utility room, workshop floodlights are wired the same way, on a dedicated circuit.
At what height and in which direction should a high power LED floodlight be aimed?
The floodlight is mounted above eye level, under a canopy or high on the wall, tilted towards the ground or towards the surface to be lit. A beam grazing the facade gives relief; a beam flat towards the street dazzles and is lost. Maintenance is limited to the glass and the seals.
Avoiding glare and light lost to the sky
Place the unit high and tilt it downwards: the light falls on the useful area instead of heading for the sky. For a work room, garage floodlights are fixed to the ceiling, above the work surface, never behind the operator.
Maintenance: dust on the glass, seal and screws
A soft cloth on the glass, a check of the seal and screws at each change of season is enough. A dirty glass loses light without anyone thinking about it. On a terrace, terrace floodlights need more frequent cleaning because of splashes.
High power LED ceiling light, wall light or chandelier: when is a floodlight not the right answer?
Indoors, a floodlight dazzles and hardens the shadows: an LED ceiling light illuminates a room by diffusing, a wall light underlines a wall, a chandelier structures a living room. The floodlight remains reserved for high ceilings, garages and outdoor areas that are to be frankly illuminated.
| Luminaire | Where | Type of light | To check |
|---|---|---|---|
| High power LED floodlight | Outdoor, garage, workshop | Directed and intense | Orientation to avoid glare |
| LED ceiling light | Living room, kitchen, bedroom | Diffused and even | Dimensions relative to the room |
| LED wall light | Hallway, headboard, living room wall | Grazing and decorative | Mounting height and fixing |
| LED chandelier | Living room, dining room | Downward and structuring | Height above the table |
| Recessed spotlight | Ceiling, bathroom | Narrow beam | Cut-out diameter and driver |
| LED strip | Under-cabinet, niche, outline | Linear and continuous | Cut marks and supported length |
LED ceiling light for living room or kitchen: which light for a living space?
In a living room or a kitchen, the light must be diffuse and even: a ceiling light illuminates without dazzling seated people and is chosen on the dimensions of the room. The luminaire catalogue covers ceiling lights, wall lights and pendants.
Changing a recessed spotlight or cutting an LED strip
A spotlight is replaced with the same cut-out diameter and voltage, after switching off the power, checking the driver and the space in the ceiling. An LED strip is cut at the manufacturer's marks, never elsewhere, respecting the polarity. Outdoors, well-designed floodlights dress a facade.
Frequently asked questions
High power 500 W LED floodlight: is it useful for a private individual?
Such a power is justified for a large plot, a farm building or a building site, not for a house courtyard where it dazzles and consumes for nothing. For a facade or a path, a more modest model, well aimed and correctly protected against rain, is enough.
High power LED floodlight with motion sensor: how to avoid unnecessary switching?
Aim the sensor at the passage area and not at the street, lower the sensitivity if branches or an animal trigger the switching, shorten the hold time. Also avoid aiming at a heat source or a reflection that tricks the infrared cell.
High power LED floodlight for building sites: which precautions?
Choose a transportable unit with a stable stand or a solid fixing, a power supply suited to the site and a protection rating consistent with outdoor use. The cable stays out of traffic areas and the floodlight is aimed at the work area, never at the eyes of the workers.
High power LED floodlight for boats: which model is suitable?
A watertight model, with a fixing resistant to spray, with a handle or a support that holds despite the rolling. The screws and the watertightness of the connection are checked before each trip; the rechargeable version avoids running a cable on the deck.
High power LED ceiling light or LED floodlight: what to choose for a living room?
For a living room, the diffusing LED ceiling light gives an even and comfortable light, without dazzling seated people. The floodlight concentrates the beam and hardens the shadows: it remains suited to a garage, a workshop or an outdoor area, not to a living space.
Ordering from Designix
This collection contains no products at the moment. A family of LED floodlights is browsed by use, by area and by power supply, to compare what really matters outdoors.





