Hanging paper table lamps
This selection is also available in our French store: Lampes à poser suspendus en papier
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
What table size for how many people?
Which tabletop material should I choose?
Extendable or fixed?
How do I care for the tabletop?

The right furniture, in the right place
Check the dimensions with our fit checker and receive pieces made to last. Unsure? Our team will answer your questions.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A paper lamp is chosen first by how it is mounted: a table lamp on a piece of furniture, or a pendant hung above a table. In both cases, the paper shade filters the light, makes it matte and removes the glare point, which makes it an ambient fixture before a spotlight.
What light does a hanging paper table lamp give?
A paper shade filters the light and softens it: it lights without creating a glare point and casts a broad halo on the walls. Paper gives a rather matte, warm light, suited to ambience. The collection currently has 0 products, so we cannot give a bulb base, diameter or material.
Soft or directional light?
A closed shade, ball or sphere shaped, diffuses in all directions: the room is bathed in light, with no marked shadow area. A shade open at the top and bottom, cylinder or cone, concentrates the light on the surface and sends part of it back to the ceiling. The first suits a relaxation corner, the second a table you need to see. For the bulb, a temperature around 2700 to 3000 kelvins keeps this warm rendering, and a standard screw base fits most models.
Printed or plain paper: what effect on the light?
Plain paper lets light through evenly and gives a clean halo. Printed or pleated paper draws shadows on the walls: the pattern reads in the light. For a calm result, stick to a plain finish; to enliven a white wall, accept the relief. Linen shades play the same filtering card, with a more pronounced weave.
Which room to install a hanging paper lamp in?
Paper goes where you want calm light: above a dining table, in a reading corner, near a sofa or as a low pendant in a bedroom. Avoid it in very damp rooms, where paper warps, and in walkways where you brush against the shade.
Which pendant above a dining table?
This is the most obvious use: the pendant draws the light downward and leaves the rest of the room in a soft half-light, which is enough for a dinner. A fairly wide shade covers the whole surface, a narrow model creates an island and forces guests to move closer. Design table lamps for the living room complete this setup by lighting the corners.
Reading corner and bedside: which lamp for reading in the evening?
To read in bed without disturbing anyone, choose a stable table lamp whose shade drops below the level of the book: the light falls on the pages and not on your neighbour's face. A low-power, warm bulb is enough. Adjustable reading lamps and the bedside ceramic for the night meet this need, as do the models designed for the bedroom.
What diameter and shape to choose for a paper pendant?
The diameter is chosen according to the distance: a pendant of 20 to 30 cm suits a small table or a small bedroom, 35 to 45 cm for a living area, 50 cm and more above a large table. The shape matters just as much: a ball lights widely, a cylinder concentrates the light downward.
| Shade diameter | Room or use | What it changes |
|---|---|---|
| 20 to 30 cm | Bedside, hallway, small reading corner | A tight pool of light, a single focal point |
| 30 to 40 cm | Living area, entrance, desk | A medium halo, readable without taking up space |
| 40 to 50 cm | Table for four to six | Lights the whole surface and structures the room |
| 50 cm and more | Large table, room with high ceilings | A strong presence, best kept for open rooms |
Paper pendant: round or cylindrical?
The sphere remains the safe choice: it diffuses everywhere and creates no hard shadow. The cylinder directs light up and down, which suits a desk or a long table. Pleated or origami shapes cast drawn shadows and need distance to be seen.
At what height should a pendant hang above the dining table?
As a rule, allow between 60 and 80 cm between the bottom of the shade and the surface: low enough for the light to fall on the plates, high enough not to get in the way of seated guests' eyes. Adjust according to ceiling height and table size. With a clean Nordic-style pendant, keep the fixing point well centred.
Ball lamp, Italian design, floor lamps: which style of paper lamp to choose?
The paper ball lamp diffuses widely and remains timeless; Italian design favours simple volumes and geometric shapes; the floor lamp frees the table and lights at seated height. The choice is made according to the space available and the type of light wanted, not according to fashion.
| Style | Shape | Where it works | Light effect |
|---|---|---|---|
| Ball | Regular sphere | Living room, bedroom, entrance | Wide, even diffusion |
| Cylinder | Straight tube | Dining table, desk | Light directed up and down |
| Origami or pleated | Facets and folds | Room with high ceilings, display | Drawn shadows, relief on the walls |
| Self-assembly | Flexible shade | Replacing an existing shade | Result depends on assembly and paper |
Design ball table lamp: what effect in a living room?
Placed on a low piece of furniture, a paper ball takes up little space and fills the sofa's blind spot. It gives a soft point of light, with no hard reflection on a screen. It is the easiest format to pair with modern living room lamps already in place.
Italian design table lamp: recognising the codes
Geometric volumes, continuous lines, a single material: these models are recognisable by their clear silhouette even when switched off. They suit understated interiors, like design wooden lamps or the design white colourway. A floor lamp takes over near an armchair, where no table can hold a table lamp.
How to hang a paper pendant without drilling?
Without drilling, use an adhesive hook rated for the weight of the shade, a clip on a track or a rod already in place. Check the load indicated on the fixing, avoid textured or heated surfaces, and keep the cable taut so the pendant stays straight.
Pendant on a rod or track: fixing without drilling
A curtain rod properly anchored supports a light shade, provided the load is distributed near a support and not in the middle of the span. On a track, use a clip designed for the track profile. The weight of the fixture and the nature of the support matter more than the length of the cable.
How to fit rings on a curtain?
The rings are fitted at the top of the panel, at regular intervals, and attached to the rod before hanging the fixture. Keep the fabric free for thirty centimetres around the shade to avoid rubbing. For a light pendant, a model close to the look of ceramic bases pairs well with a heavy textile.
How to wire several lamps on a single electrical supply?
Several lamps can run from the same supply if they are connected in parallel on a terminal block: each lamp receives the live and neutral. The number of points depends on the total power and the circuit. Beyond two or three fixtures, an electrician should validate the wiring and the wire gauge.
Wiring several lamps in parallel
The principle is simple: the conductors of each fixture arrive on the same terminal block, never chained from one lamp to the next. Add up the bulb wattage before connecting, and switch off the power at the breaker. A terminal block accessible in a junction box avoids bare splices.
Wiring three lamps with one switch
Three lamps controlled together are connected in parallel, with a common live and neutral and a single return to the switch. This solution suits an alignment above a worktop or a row of pendants. For fixed points, design desk lamps and metal desk lamps often just need a socket.
How to arrange ceiling spotlights with a paper pendant?
Place the spotlights around the perimeter and reserve the centre for the hanging fixture, to avoid two sources facing each other. The spotlights provide functional lighting, the paper pendant brings ambience. Align them along the length of the room and keep them away from the walls to avoid light patches.
Spotlights and pendant: what layout?
Two rows of spotlights framing the living area, a pendant in the centre: the room keeps useful lighting without the two devices working against each other. Avoid lighting the ceiling just above the shade, which flattens the paper's halo. Design LED versions use little power and give off little heat.
Where to place spotlights relative to the wall?
As a rule, keep a distance from the wall of at least half the ceiling height to avoid a cut-off cone on the partition. Then align the spotlights on a regular axis, keeping the same spacing between each. Check the line on the floor with chalk before drilling.
How to care for a paper lamp and which mistakes to avoid?
A paper shade is dusted dry, with a feather duster or a soft cloth, never with a liquid product. Avoid hanging it near a heat source or an open window, and check the base, the cable length and the weight of the shade before fixing the hanging point.
Dusting a paper shade without marking it
Run the duster from top to bottom, without pressing, and blow into the folds with a bulb blower. A greasy stain cannot be rubbed out: the paper will be permanently marked. Dust before changing the bulb, with the power off, which avoids handling the shade while hot.
The mistakes to avoid before fixing the hanging point
Three checks are enough: does the bulb base match the fixture, is the cable long enough for the intended height, does the weight of the shade stay within the limit of the fixing. Also avoid placing a paper lamp against a radiator, and hanging it low in a hallway.
One last reference before ordering: measure the distance between the wall and the centre of the table, it determines the diameter. To compare families and formats, browse our lighting catalogue.
Secure payment, tracked delivery, returns and Designix customer service: you order with no risk, and the team answers before and after purchase. Find all Designix lighting families and the full lighting range to complete your room.
Frequently asked questions
What is the ideal height for a pendant light above a table?
Hang the pendant low enough for the light to fall on the surface, high enough not to get in the way of seated guests' eyes. In practice, the bottom of the shade sits above eye level once seated. Then adjust according to ceiling height and table size.
What are the four types of lamps?
We distinguish table lamps (desk, bedside, office), floor lamps, pendants hung from the ceiling and wall lights or ceiling lights fixed to the wall and ceiling. Each family gives a different light: a pendant lights from above, a table lamp lights at seated height.
Where to find a pendant light to fix without drilling?
Pendants to fix without drilling are found in the hanging light collections and are mounted with a suitable adhesive hook, a clip on a track or an existing rod. Check the load indicated on the fixing and the nature of the support before hanging the shade.
Do you need an electrician to wire several lamps on one supply?
For two fixtures on an accessible terminal block, parallel connection is within reach of a careful DIYer, with the power off. As soon as you need to add a switch, run a line or multiply the points, an electrician is needed: they check the total power, the circuit protection and the continuity of the neutral.
What does "hanging paper table lamps" mean?
The expression mixes two families: the table lamp, which sits on a piece of furniture, and the pendant, which hangs from the ceiling. In both cases, the shade is made of paper, which gives a soft, matte light. The choice is therefore made first on the mounting method, then on the shape.





