Green glass ceiling lights

Start by counting the room and the size: a 12 cm diameter globe dresses a hallway or an entryway, a 32 or 52 cm square holds a living room. Then check the socket, G9, E27 or integrated LED, and the protection rating. Green glass ceiling lights tint the light with a soft veil, without darkening it.

How to choose your green glass ceiling light?

First look at the room and the size: a compact globe for a hallway, a wide square for a living room. The socket then decides the light you can upgrade, and the frame material, steel, wood or brass, sets the style.

Green glass ceiling light: globe, square or tube

The globe leads the shapes in the collection, ahead of the square, then the round and the tube. A 12 cm diameter globe is enough in a hallway, two to four globes in a row cover a narrow living room, six globes over 120 cm long light a dining room. The square with a wood frame, in 42 or 52 cm, sits above a table, and the 37 cm high tube is reserved for the workshop.

G9, E27 or integrated LED socket: what it changes

The G9 equips half of the models, almost all with globes: each bulb is replaced on its own and you choose its temperature, around 2700 K for a warm white, near 4000 K for a sharper white. The E27 concerns the squares, the globe and the tube. The integrated LED, at 12 W or 22 W, is replaced by a dedicated module. To go further, compare with all our light fixtures.

What light does a green glass ceiling light give?

Green glass filters the light with a soft veil without darkening it, especially when the diffuser is opal. A single globe concentrates the flow on one point, a version with two, three, four or six globes spreads it over the whole length of a living room or a hallway.

Tinted glass or opal diffuser: which result?

An opal diffuser, milky white, spreads the light evenly and avoids hot spots on the ceiling. Green tinted glass, or frosted, slightly colours the light and lets the bulb show through. In a hallway with light walls, opal stays the most neutral; in an entryway, tinted glass gives a stronger note.

LED ceiling light or bulb to change yourself

The listed wattages go from 8 W for the G9 globes to 15 W in E27, up to 4 x 15 W maximum on the large squares, and 12 or 22 W for the integrated LED diffusers. A model with a bulb lets you change the colour temperature later; dimmable models remain rare here, to be found in the models adjustable with a dimmer.

Which green ceiling light for the living room, the bedroom or the kitchen?

The living room and the dining room call for a 32 to 52 cm square or a bar with several globes, which lights a table or a sofa. The bedroom prefers a single low model, the hallway a compact globe: green glass brings colour there without glare.

Green glass ceiling light for the living room and the dining room

On a table for six, allow a fixture width between a third and a half of the table length. The large square with the Mirana wood frame sits above a table, and the Sestia six globe bar lines up its light on a long surface. For a white living room, also see the modern white colours.

Bedroom, kitchen and hallway: which size to choose

In a bedroom, a single globe flush with the ceiling keeps the room calm. The Lorranissa globe on a square base stays discreet above a bed. In the kitchen and the hallway, a wider size handles the general lighting: browse the models designed for the bedroom if you are looking for a soft, low light.

In which rooms should you install an IP44 glass ceiling light?

The IP44 rating protects against water splashes: it is chosen for a kitchen, a workshop or a damp space. In a dry room, IP20 is enough and covers most of the models in the collection. Check the protection rating line of each product sheet before ordering.

IP20 or IP44: how to read the protection rating

The first digit covers solid objects, the second water. IP20 means no protection against water is provided: living room, bedroom, dining room, hallway, office. IP44 adds resistance to splashes, without immersion. The rating says nothing about the wattage or the quality of the light, only the protection level of the fixture.

Kitchen and workshop: when to choose an IP44 ceiling light

Above a worktop or a bench, near a water point, take an IP44 model. The Silnorina IP44 round goes in a kitchen, with its glass and aluminium frame. For a workshop, the IP44 globe and tube in metal, glass and brass, dimmer compatible, lights a wider area. The modern style LED ceiling lights offer other options.

How to match a green glass ceiling light with your decor?

Green matches with steel, brass and light wood, three materials present in the collection. On a white or beige wall, green glass becomes the touch of colour; on a dark wall, it blends in and warms the room. Keep a single strong shade per room.

Green, steel, wood and brass: the pairings that work

All the models are in glass, half in steel, about a fifth in wood, and a smaller share in brass. A steel frame keeps a sober look, a wood frame warms the green light, a brass detail makes it stand out. To push the pairing further, see how to match glass with brass and the light wood frames.

On which wall to bring out the green glass

The colours of the collection go from white to black, through beige. On a light wall, green glass stands out clearly; on a dark wall, it creates a softer contrast. If you prefer a neutral ceiling, compare with the white glass ceiling lights. A dark room sometimes calls for a black frame, like the black metal ceiling lights.

How can I replace a ceiling light?

Cut the power at the circuit breaker, remove the old fixture and identify the live, neutral and earth wires. Connect the new ceiling light with terminals, then fasten it to the bracket before restoring the power. Glass weighs more than a plastic diffuser: check the fixing.

Cut the power and remove the old ceiling light

Switch off the breaker of the lighting circuit and check there is no current at the switch. Dismantle the fixture while holding the glass with one hand, then note the position of the wires: identify the earth, often green and yellow, and tell the live from the neutral if your installation allows it.

Fasten the bracket and connect the wires

Hold the bracket to the ceiling, mark the holes and choose plugs suited to the material, plasterboard or concrete. Connect each wire to the matching terminal, tighten, then screw the fixture. On models with G9 globes, fit the globes last. Also see the Designix lighting catalogue.

What budget should you plan for a green glass ceiling light?

The collection brings together affordable models and more elaborate pieces, with a stated 2 year or 5 year warranty depending on the references. The current price is shown on each product sheet: first compare the size, the socket and the protection rating before deciding.

Affordable models or more elaborate pieces

A simple globe in glass and steel, with a G9 bulb to change yourself, falls into the most affordable category. A more elaborate piece combines a brass frame, a fluted ceramic base or an opal diffuser and an integrated LED. Compare like with like: two fixtures of the same diameter do not play the same tune depending on their socket.

2 year or 5 year warranty: what to check

Half of the selection is covered by a 2 year warranty, the other half by 5 years: look for the warranty line on the sheet before adding to the basket. The shop provides secure payment, tracked delivery and returns, with Designix customer service for any question about a model.

How to clean and care for a glass ceiling light?

Cut the power, then clean the glass with a soft cloth and an alcohol free product, never an abrasive. Opal glass and frosted glass are dusted dry. To change a G9 or E27 bulb, let the fixture cool before removing the socket.

Clean the glass without scratching it

A slightly damp microfibre cloth is enough for clear or tinted glass. Avoid abrasive powders and alcohol, which leave marks on frosted glass. Once a year, also run a dry cloth over the steel or wood frame to remove accumulated dust.

Replace a G9 or E27 bulb

Cut the power and wait for the fixture to be cold. On a G9 socket, gently pull the globe down, without forcing on the socket. On an E27, unscrew the bulb. Use the wattage stated on the sheet, 8 W in G9, 15 W maximum in E27, so as not to overload the fixture.

Frequently asked questions

Choose your size, check the socket and the rating on the sheet, then add to the basket: the current price is shown on each model, and the Designix customer service remains available to confirm a diameter or a height before delivery.