Gold-colored metal lampshades

A gold metal lampshade reflects light back into the room and sends it downwards: the beam is sharper and more contrasted than with fabric. Place it near a light-coloured wall or above a worktop, never in front of a screen, and the gold tone warms even a white LED bulb.

What light does a gold metal lampshade give?

Gold metal reflects light back into the room and sends it downwards, which gives a sharper light than a fabric lampshade. The gold tone warms the white light of LED bulbs. So it should be placed near a light-coloured wall or above a worktop, never in front of a screen.

Everyday light with a gold metal lampshade

A metal lampshade is opaque: it does not let light through its sides, it directs it upwards and downwards. The result is a clear cone of light on the table or the book, and a golden glow on the wall behind. That contrast is what makes the room readable in the evening, without switching on the ceiling light. Choose a warm bulb, around 2700 to 3000 K, so the reflections stay warm.

Gold metal or fabric: what changes in the room

Fabric diffuses and lights widely; metal frames and directs downwards. For soft, even light, compare with the fabric models. For a more natural look, with visible texture, look at a linen lampshade. Gold metal, on the other hand, is chosen when you want directed light and a visible object, both off and on.

Where to install a gold metal lampshade in the home?

In the living room, a gold lampshade goes on a floor lamp or as a pendant above a table. In the bedroom, it suits a bedside lamp or a reading floor lamp. In the hallway, it works as accent lighting and catches the eye as soon as the door opens.

In the living room, on a floor lamp or as a pendant

A floor lamp places the light at shoulder height, next to the sofa or the reading armchair: the beam falls on your lap and the book, not in your eyes. As a pendant above the coffee table or the dining area, allow about 70 to 80 cm between the bottom of the lampshade and the surface. To go further, see for the living room.

In the bedroom and on a bedside lamp

On a bedside table, the lampshade sends light down towards the floor and avoids dazzling the other person in bed. Choose a small format, taller than it is wide, that frames the beam on the book. The bedroom lampshades also come in small formats for a baby's room, where you want a soft night light rather than reading light.

How to choose the size and socket of your lampshade?

A lampshade must cover the socket and let the bulb through: first check whether your light takes an E14 or E27 socket, then the diameter of the original lampshade. Height matters too: the taller the lampshade, the more light goes upwards.

Which diameter for which light?

Measure the lampshade in place, from edge to edge, and its total height. A lampshade wider than the base balances the silhouette; narrower, it squashes the light. For a remote purchase, rely on these two measurements rather than a photo. The table below gives the usual references, to compare with your own measurement.

E14 or E27 socket: how to check before buying

The socket is the bulb's screw thread. E14 is the small thread (bedside lamps, wall lights), E27 the large one (floor lamps, pendants). Look at the light's socket, or at the bulb you removed: it is marked on it. Then check the lampshade fixing: screw-on, clip-on, spider or sit-on. The lampshade range brings these fittings together, and all our lights help you find the original support.

How to install a lampshade?

On a table lamp, the lampshade is screwed or clipped onto the socket, with the power off. On a floor lamp, it rests on the intended support. For a pendant, the lampshade slides onto the cable before connection and ceiling fixing, never after.

How to hang a lampshade from the ceiling

Switch off the power at the breaker. Slide the lampshade onto the cable, fix the mounting plate to the ceiling with the supplied support, then connect according to the instructions and screw in the bulb. The lampshade must stay straight and not weigh on the cable: the plate carries it, not the wire. A pendant that hangs too low above a table is raised by shortening the cable.

Floor lamp lampshade: how to fix it

Identify the type of fitting at the socket: screw-on, clip-on or spider (several arms from the socket). The spider requires a gap between arms compatible with the shape of the lampshade. Tighten without forcing, the lampshade must neither move nor touch the bulb. To change model, browse all lampshades to sit or hang and see the compatible lights.

How to change the fabric of a lampshade?

Changing the fabric of a lampshade only concerns models with fabric stretched over a frame. A metal lampshade is not re-covered: it is dusted with a soft cloth, without abrasive product, to preserve the gold finish. If the frame is damaged, the whole lampshade is replaced.

Change the fabric or replace the lampshade?

On a frame in good condition, you peel off the fabric, cut a piece suited to the bulb's heat and glue it back on. The job takes time and a fire-retardant fabric. On a metal model, the question does not arise: the surface is cleaned, the gold finish is preserved. If in doubt, comparing with a softened light helps you decide.

Caring for a gold metal lampshade without damaging the finish

Switch off, let it cool, then wipe with a dry microfibre cloth. For a mark, a barely damp cloth, dry immediately. Avoid abrasive sponges, alcohol and degreasing products: they dull the gold finish. Dust the inside twice a year, where insects settle. An LED bulb gives off little heat and extends the life of the finish.

How to pair a gold lampshade with the rest of the decor?

Gold goes with a white or beige wall, which reflects its light, and with black, which sharpens the contrast. It also works near light wood, linen and glass. Avoid multiplying different metals in the same room: two are enough, with gold as the accent.

Gold metal lampshades and light colours

On a white, beige or greige wall, gold warms without dominating: it is the easiest pairing, and the one that reflects the most light into the room. Light wood and linen add texture without competing colours. For an even brighter look, compare with the white colourway.

Gold and black: the contrast that structures

Matte black sharpens the gold and outlines the silhouette of the light, which suits a hallway or an office. One gold object per area is enough to create the accent; beyond that, the eye no longer knows where to look. If you are after this look, see the black version and the modern lampshades.

Gold chandelier, wall light or lampshade: which solution for which room?

A gold chandelier lights a whole room and occupies the centre of the ceiling; a gold lampshade lights an area, a reading corner or a bedside. A wall light frees the floor in a narrow hallway or entrance. The choice depends mainly on the available height and the area to cover.

Gold chandelier or gold lampshade: choosing by ceiling height

Under a low ceiling, a chandelier hangs too close to heads: prefer a lampshade on a floor lamp or a wall light. Under a comfortable height, a central chandelier anchors the room and lets the lampshades provide the accent. In a narrow hallway, the wall light replaces the floor lamp that gets in the way. For a more understated look, see a more contemporary style.

Metal cabinet and gold light: pairing the two metals

A dark metal cabinet and a gold lampshade coexist if both finishes are crisp: brushed metal on one side, gold on the other. Two metals, not three. The slim shelf or black legs work for the same reason, they structure without adding colour. To equip the whole room, see equipping a living room and the lighting catalogue.

Reassurance and ordering

At Designix, orders are paid by secure payment, shipping is tracked and returns are provided for if the format does not suit. Customer service answers measuring questions before purchase. Take your socket and diameter measurements: that is what avoids a return trip.

Frequently asked questions