Garden spotlights

This selection is also available in our French store: Spots pour jardin

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right light output?
Allow about 100 to 300 lumens per m²: about 150 lm/m² for a living room, about 350 for a kitchen. Each product page lists the lumens.
At what height should the light be installed?
Above a table: 70-85 cm from the tabletop; in a walkway: at least 2.10 m of clearance below the bulb.
What type of bulb?
Usually E27 or E14, sometimes GU10. Specified on each product page.
Compatible with LEDs and dimmers?
Yes, in most cases; for use with a dimmer, look for the “dimmable” mention.
Garden spotlights
Designix · Design lighting

Light changes everything

From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

The choice depends first on the area: a recessed ground spotlight suits paths and terraces, a spike spotlight is planted in a flowerbed or planter, a wall light or floodlight is fixed to a facade. Then you look at the IP rating, the orientation and the beam width.

Which garden spotlight should you choose depending on the area to light?

A spotlight is chosen by use above all. A path wants a low light set on the ground, a flowerbed wants a beam that rises up the foliage, a facade wants a downward and even light. The type of installation follows from that intention, then the material and the IP rating confirm the rest.

A garden spotlight to light a path or a terrace

On a path, the aim is to guide the step without lighting wide: a flush model, recessed into the slab or stabilised gravel, with a narrow beam directed towards the ground. Foot traffic and water spray require a solid material, aluminium, powder-coated steel or tempered glass, and an IP rating suited to installation in open ground. Modern outdoor spotlights fill this role with a sober line that disappears into the setting.

A garden luminaire to highlight a flowerbed or a tree

A flowerbed is revealed from below: the spike spotlight is planted in the soil, a short distance from the foliage, and raises the light along the stems. An adjustable fixture makes the difference, because you adjust the angle without moving the stake. A dark colour blends into the soil and foliage, as offered by black spotlights, discreet in flowerbeds, while metal outdoor spotlights bring a finish that ages well outdoors.

Garden lighting fixed to a facade or a low wall

On a facade, the light goes down: a wall light or floodlight fixed at the top of the wall, beam directed downwards, never towards the street or the neighbour's window. You check the fixing, the rain resistance and the colour of the housing. On a light-coloured wall, white spotlights for light-coloured facades go unnoticed.

Which garden spotlight depending on the area to light
Area to light Type of installation What you check first Recommended setting
Path and walkway Recessed in the ground, flush Watertightness and resistance to foot traffic Low beam, directed towards the ground
Wood or stone terrace Recessed into the decking or slab Support and permissible load Grazing light, without glare
Flowerbed, shrub, planter Spike spotlight planted in the soil Height of the stake and orientation Beam rising up the foliage
Facade and low wall Wall light or floodlight fixed to the wall Fixing and rain protection Downward and even beam
Stairs and steps Recessed into the step or low wall light Resistance to water and impacts Grazing light on the step edges
Pond and water feature Submersible model High IP rating Orientation towards the bottom

Solar garden spotlight or mains-connected luminaire: which to choose?

A solar spotlight is installed without wiring and can be placed anywhere, but it depends on the light received during the day. A luminaire connected to the mains gives constant intensity and allows adjustment or dimming. The two can coexist: solar on isolated points, mains-connected on heavily used areas.

What a solar garden spotlight brings

The great advantage is freedom of placement: no trench, no cable to run along a hedge, a simple planting in the soil or a fixing on a stake. It is used for a forgotten corner of the plot, an isolated pot, a distant border. In return, the light varies with the season and the sunlight received, which means accepting a less even result.

What a mains-connected garden luminaire requires

Connection requires planning the cable route and a power point before closing a terrace or laying a lawn. In exchange, the intensity remains stable all year round and you can add a dimmer to lower the light at the end of the evening, which dimmable spotlights to lower the intensity in the evening allow. Adjustable LED spotlights to direct the beam complete this comfort by allowing you to aim precisely at a subject.

Can you mix the two in the same garden?

Yes, provided you keep the same colour temperature throughout. Solar is reserved for hard-to-reach points and mains for living areas, terrace, entrance, stairs. The mix is not visible if the light tone is identical and the housings stay in the same colour family.

What is the ideal power for an outdoor LED floodlight?

Useful power is read in lumens, not watts: it is the luminous flux that actually lights. In a garden, a moderate and well-directed flux works better than a high power that is poorly oriented. You adjust the angle and the height to light the desired area without glare from the house.

Read the stated lumens rather than the watts

Two outdoor floodlights with the same power consumption can give very different luminous fluxes depending on the technology used. The watt indicates what the fixture consumes, the lumen what it projects. A well-designed model with a clearly stated flux and a controlled beam does the work of a more power-hungry, poorly oriented fixture. So compare the specifications line by line, never just the power figure.

Adjust the orientation and height of the floodlight

A floodlight placed too high and too powerful at the edge of a terrace dazzles guests and flattens the garden. You lower it or reduce the flux, then direct the beam towards the object to highlight. Two weak and well-aimed points are better than a single strong point that floods everything. Dimmable LED spotlights let you adjust the intensity after installation.

Reading the technical sheet of an outdoor spotlight
Characteristic What it indicates Why it matters outdoors
IP rating Resistance to dust and water Determines where the spotlight can be installed
Colour temperature Warm, neutral or cool white Sets the mood of the garden
Base Type of socket, GU10 or GU5.3, or integrated LED Determines replacement of the source
Material Metal, tempered glass, outdoor plastic Weather resistance and appearance
Orientation Fixed or adjustable Allows aiming at a flowerbed or a wall
Dimmer compatibility Intensity adjustment Useful for lowering the light in the evening

Which light colour should you choose for a garden in the evening?

A warm white gives a soft and intimate light, suited to terraces and dining corners. A neutral white makes greens more vivid and better defines foliage and materials. The most important thing is to keep the same temperature throughout the garden to avoid a messy patchwork.

Warm white or neutral white: the effect on foliage

A warm white, around 2700 K, leans towards amber and suits moments of relaxation, meals, aperitifs, evenings. A neutral white, around 4000 K, stays cooler and brings out the green of foliage as well as the texture of stone and wood. On a large subject or a hedge, this sharper rendering structures the garden. On a terrace, warm is generally more comfortable.

Why avoid mixing several temperatures in the same garden

The eye immediately spots two different lights side by side, and the garden looks cobbled together. So choose one temperature for the whole outdoor area, then vary it in intensity depending on the zones: stronger on a flowerbed, softer near seating. A single tone also holds up better over time when adding or replacing a source.

How do you light a planter, a terrace and a stone garden bench?

You light the object, not the ground around it. A spike spotlight placed behind a planter raises the light onto the foliage. A stone garden bench is highlighted by a grazing and soft beam, because stone reflects light. On a terrace, direct downwards to avoid glare.

Lighting for a planter: height, angle and discretion

The stake is planted about twenty centimetres from the pot, directed upwards and slightly inwards. A narrow beam avoids washing the wall behind and defines the leaves one by one. For a raised planter or a bowl, a design spotlight to place in the garden or a discreet adjustable luminaire on the ground is preferred, more stable than a stake in a pot.

A reconstituted stone garden bench: which lighting highlights it?

Stone reflects a lot of light: a strong flux turns it into a white patch. Place a small spotlight a few steps away, graze the surface, and the relief of the bench appears. Warm white suits stone better than neutral. The fixture stays out of the field of view from the terrace, hidden behind a plant or under the seat.

Lighting a terrace without dazzling guests

The rule is simple: no source should be in the line of sight. Recess into the decking or slab, direct towards the ground or a wall, and keep a moderate flux. Grazing lighting at the foot of the wall lights without ever dazzling. On a wooden terrace, check that the recess supports the load and stays watertight.

How do you install and maintain outdoor spotlights?

First identify the area and the type of installation, then prepare the support before fixing the spotlight and planning the connection. Then regular cleaning and checking of fixings and seals keep the watertightness and the quality of the light season after season.

Prepare the support, run the cables and connect

Before drilling a slab or opening decking, draw the plan of the light points and check the cable route. A ground recess requires a reservation and correct drainage around the housing. For steps, the narrowest models fit into the step edge, as shown by outdoor stair spotlights. Connection to the mains should be entrusted to a professional.

Clean, check fixings and watertightness

Twice a year, wipe the glass, remove leaves and soil accumulated around the housings, check that the screws hold and that the seals have not hardened. A dirty glass loses part of its light, and a worn seal lets water in. This check is part of routine maintenance and clearly extends the life of the equipment.

What is a good brand of LED spotlights?

There is no single brand that suits every garden. For this collection of 54 spotlights, you judge the technical sheet of each model instead. Clear and verifiable information protects the purchase better than a commercial promise.

The criteria that matter more than the logo

Look at whether the base is replaceable, whether the source is an integrated LED, whether a replacement seal is provided, whether the housing is in metal treated for outdoor use. A fixture whose composition you understand can be repaired or completed. A model with no indication of material or watertightness leaves the buyer with no recourse at the first hard winter.

Why a complete technical sheet protects the purchase

Outdoors is a demanding environment: rain, frost, damp soil, foot traffic. The sheet indicates where the spotlight can live, and it is what avoids a bad installation. To go further, browse the complete lighting catalogue and compare the sheets side by side before deciding.

How do you match garden spotlights with the lighting of the house?

A garden is read from the house: if the outdoor spotlights are warm white, the entrance, hallway and living room benefit from staying in the same light family. This extends the mood without a break, keeping discreet sources and an intensity suited to each room.

Luminaires for WC, hallway and entrance in the same light family

Continuity starts at the doors: an entrance lit with the same tone as the terrace removes the break when you come home in the evening. Spotlights to light the entrance from the garden and luminaires for WC and small rooms generally follow the same installation logic, recessed or surface-mounted, with sources directed towards the ground. Stair spotlights continue this thread indoors.

Light colour for living room and decor for a modern kitchen: extend the mood

In living rooms, the same colour temperature keeps the consistency perceived from the bay window. Choose the light colour for living room in continuity with the garden, then adapt the intensity. In the kitchen, extend the same colour temperature with adjustable and discreet sources, such as a kitchen pendant or modern kitchen spotlights depending on the style, or LED spotlights designed for the kitchen for precision.

Frequently asked questions about garden spotlights

How do you light an indoor garden?

The principles are transposed with less powerful sources: an adjustable spotlight directed at the planter, a warm light and a narrow beam. Keep a result close to the outdoor garden, without watering the luminaire directly and without too strong a flux on fragile leaves.

Do you need watertight spotlights for a garden?

Any outdoor installation requires a model designed for outdoors. The IP rating indicates resistance to dust and water, and it must be suited to the location: sheltered, in full rain, on the ground or submerged. Do not trust the appearance of the housing, but the stated value.

Spike spotlight or ground-recessed spotlight, which to choose?

The spike spotlight moves with the seasons and follows a flowerbed or a planter; it is removed for mowing or digging. The ground-recessed spotlight stays fixed, is flush with the surface and suits paths and terraces, provided you choose a model resistant to foot traffic.

Can you install a solar garden spotlight without electricity?

Yes, a solar garden spotlight is planted or fixed without wiring and works thanks to its cell. It depends however on the light received during the day, which makes it ideal on an isolated point, as a complement to a mains-connected luminaire on the most used areas of the garden.

How do you light a stone garden bench?

Stone reflects light: place a low-intensity spotlight a few steps from the bench and direct the beam grazing the surface. A reconstituted stone garden bench is highlighted by a warm and soft light, never by a frontal floodlight that crushes the relief.

Reassurance and moving to purchase

The simplest thing is to start with the most used area of your garden, then add the secondary points over the seasons. Identify the type of installation and the colour temperature before comparing models, and rely on the written characteristics: material, base, IP rating, orientation. The lighting catalogue groups all the families, from the spike spotlight to the dimmable LED spotlight for extended evenings.

At Designix, payment is secure, delivery is tracked, returns are possible and customer service answers your questions on choosing a model. If a doubt remains between two references, ask for the technical sheet before confirming: it is the best way to place the right light in the right spot.

--- cle: handle --- outdoor-spotlights --- cle: meta_title --- Outdoor spotlights: choosing garden lighting --- cle: meta_description --- Outdoor spotlights, recessed or spike: material, IP rating, light temperature and orientation to light terrace, flowerbeds and paths. Choose the right garden lighting.
Our advice for choosing
Choosing garden spotlights means deciding what you want to light: a path, a flower bed, a terrace or a facade. This guide reviews the protection rating, the socket, the orientation and the light temperature before comparing the available models.