Flexible LED neon
This selection is also available in our French store: LED flexible néon
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Measure the length of the run in metres, choose the sheath (dry or IP65), then the colour: warm white for a bedroom, neutral white for a hallway or a worktop, RGB for a wall design. The flexible LED neon bends by hand, is fixed with clips or in a track, and is only cut at the manufacturer's marks.
- What a flexible neon is and the light it gives
- Where to install it in the home
- Colour and temperature
- Fixing, power supply and cutting
- Neon or LED strip
- Indoor and outdoor: the IP rating
- Maintenance and mistakes to avoid
- Matching the neon with other lights
What is a flexible LED neon and what light does it give?
A strip of diodes enclosed in a flexible sheath, most often silicone. The light comes out as a continuous line, with no visible dots, whereas a strip with exposed diodes shows each source. The cord bends by hand, is fixed with clips or in a track, and comes in warm white, neutral white, cool white or RGB.
Flexible LED neon tube: the flexible sheath instead of glass
The historic neon tube is rigid glass filled with gas, with a high-voltage transformer, and it cannot be cut at home. The flexible version keeps the idea of the luminous line but changes the installation: you curve it around a corner, follow a cabinet upright, draw a letter. The sheath protects the diodes and can be cleaned. To place this product within the LED lighting range, remember this criterion: what you see is the sheath, not the diode.
Flexible LED neon 360: when the light must come out on all sides
A classic version emits on one face. The 360 degrees diffuses all around, which suits a suspended line, a frame above a table or a pillar to highlight. It requires a support that leaves the perimeter free, otherwise the light is masked on one side. Against a wall, the single-face version remains more effective and more discreet.
Where to install a flexible LED neon in the home?
Where a continuous line is missing: under a shelf, along a wall, behind a sofa, as a frame around a mirror, as a design on a living room wall. It serves as an accent and not as general lighting: it highlights a zone, it does not replace the source that lights the room. A damp room requires a protected sheath.
Wall neon: drawing a shape rather than lighting a room
The wall neon is chosen for the shape: a first name in a bedroom, a logo in a shop, a wave along a hallway. Draw the pattern in pencil or on tracing paper before fitting the clips, otherwise the curve is hard to correct. In a bedroom, place it on the headboard wall, never in the line of sight from the pillow. For the main source, see a soft light in the bedroom.
Ceiling LED lighting and neon: two layers of light to match
The ceiling light provides the general light, the neon adds a low or side line. This layering avoids the uniform lighting that flattens a room. Set both to the same white family, otherwise the wall turns grey on one side and orange on the other. A LED ceiling light for general lighting covers the surface, the neon highlights a detail.
How to choose the colour and temperature of a flexible LED neon?
Warm white creates rest, for a bedroom or a reading corner. Neutral white stays legible in a hallway, a kitchen or an office. Cool white suits a workshop or a garage. RGB colours a room, it does not make a worktop legible.
Flexible LED neon RGB: the colour that changes the mood
RGB is controlled by remote or by app: you go from a deep blue to a soft orange in a second. It suits a living room, a teenager's bedroom, a decorative wall. Check what the box contains: remote included, memory of the last setting, colours actually available. A LED chandelier as a centrepiece pairs well with a flexible LED neon kept as an accent.
Warm white, neutral white, cool white: read the label before buying
The label gives the colour temperature in kelvins, and that is the figure to compare from one model to another. As a general guide, a warm white sits around 2700 to 3000 K, a neutral white around 4000 K, a cool white above 5000 K. The same trade name can hide two different results: trust the value, not the word.
How to install a flexible LED neon: fixing, power supply and cutting?
Measure the run in metres, add the cable to the socket and keep the planned cutting margin. Clean and dry the surface, fix the clips or the track, then unroll the sheath. Check the power supply voltage before plugging in. Cut only at the marks: beyond that, the section no longer lights up.
Cuttable LED strip: how does it work?
The cutting marks are marked every few modules, with a line and two solder pads. You cut at that point, fit a connector or an end cap, and the kept part retains its circuit. The detached part is no longer used. Respect the maximum length allowed by the power supply, otherwise the end of the line weakens. LED spots to fit on the ceiling complete the setup.
220 V LED strip or 24 V power supply: what to check before connecting
A 220 V LED strip connects directly to the mains via a cable and an end cap, which simplifies long runs. A low-voltage version, often 24 V, requires a power supply sized according to the total length. In both cases, the mention on the packaging is what counts, never an assumption: an incompatible model burns out when powered on.
Flexible LED neon or LED strip: which lighting solution to choose?
The classic strip shows its diodes and is hidden for indirect lighting. The neon gives a solid line, follows curves and wipes clean with a cloth. Choose the neon when the line of light becomes a visible decorative element; keep the strip for hidden light.
| Criterion | Flexible LED neon | Classic LED strip |
|---|---|---|
| Appearance of the light | Continuous line, invisible diodes | Visible diodes, bright dots |
| Shape | Follows curves, corners and letters | Mostly straight line |
| Installation | Clips, track or adhesive depending on the sheath | Adhesive or aluminium track |
| Cutting | Only at the manufacturer's marks | At the marked cutting points |
| Typical use | Wall design, outline, decorative sign | Indirect lighting, under-cabinet |
| Cleaning | Soft cloth on the sheath | Soft cloth on the support |
What the neon does better than a strip
The curve, first: a silicone sheath follows a rounded shape without breaking, whereas a strip on an aluminium profile imposes angles. The cleanliness of the line next: no diode protrudes, so no bright dot on a pale wall. Finally the contact: the sheath can be cleaned and withstands touching, which matters for a sign or a mirror outline.
What the strip does better than a neon
The strip slips into a narrow profile and disappears under a shelf or behind a skirting board. It comes in long reels and is easy to cut. For invisible indirect lighting, it is the simplest solution. Under a kitchen cabinet, it usefully complements lighting a kitchen worktop.
Indoor or outdoor: which IP protection rating to choose for an LED neon?
The IP rating measures resistance to dust and water: two digits, the first for solids, the second for liquids. For a terrace, a bathroom or under a canopy, choose a sheath rated IP65 or higher, with a protected connection. In dry interiors, a simple sheath is enough, but the IP is the first line to read.
IP65 for a terrace or a bathroom: what it covers
An IP65 indicates a sheath sealed against dust and water jets, not immersion. A bathroom remains a damp environment: keep the neon away from the direct shower and protect the connection. A terrace exposed to rain also requires weather-resistant clips, otherwise the line comes off in the first winter. As a general guide, the higher the figure, the stronger the protection.
Power supply and connectors: the weak point of an outdoor neon
The sheath holds, but the power supply and the connectors remain the sensitive parts. Place them under shelter, under a canopy or in a closed box, and let the cable hang so that water runs off. A bare connector block outdoors does not last the season. This point is checked before choosing, just as the terminal block is checked before replacing a recessed LED spot.
How to maintain a flexible LED neon and which mistakes to avoid?
Dust with a soft, dry cloth, without abrasive or solvent on the sheath. The most frequent mistakes: cutting outside the marks, bending the sheath at a right angle, undersizing the power supply, sticking the adhesive on a damp or dusty wall. A careful installation avoids most failures.
Cutting, bending and length: the limits to respect
A silicone sheath bends in an arc, not at a sharp fold: a marked angle damages the protection and lets moisture in. To turn sharply, fit a clip on each side of the corner and let the sheath form a soft loop. The maximum length of a continuous line is given by the manufacturer; beyond that, you start again with a second power supply.
Neon that flickers or goes out: where to start
Check the connection and the voltage delivered by the power supply, then the total connected length. Flickering often comes from an undersized unit or a poorly inserted connector. If only the end of the line weakens, it is the voltage drop over the length. If nothing lights up after a cut, the cut is probably outside the mark.
How to match the LED neon with a ceiling light, a wall light or a chandelier?
The neon serves as an accent, not as general lighting: match it with a ceiling light to light the room, a wall light to read, a chandelier or a pendant to mark a corner. Keep the same white family, otherwise two lights contradict each other on the same wall.
Powerful LED ceiling light and neon: which one really lights the room?
The ceiling light lights, the neon highlights. First look for the surface to cover and the ceiling height, then the type of light: warm for a cosy mood, neutral if the living room also serves as an office. See ceiling lights designed for a living room, or a contemporary and understated model when the neon already carries the decoration.
When to add a powerful LED wall light or a living room LED chandelier
The wall light takes over for reading, at sofa or bed height: an LED wall light for reading avoids lighting the whole room. Above a table, a pendant above the table brings the light down to useful height. In a hallway, a hallway ceiling light is enough, complemented by the neon at skirting level. Next to the sofa, an LED floor lamp as an extra does the rest.
Before ordering, note three things: the length of the run, the power supply voltage and the desired colour. Secure payment, tracked delivery, returns and Designix customer service cover the rest.
For general lighting, see adjusting the intensity in the evening. If the room serves as an office, a office ceiling light sets visual comfort. In a bedroom, bedroom wall lights complete the headboard, and to compare families, browse all Designix lighting.
Which flexible LED neon for which room?
| Room or use | What we are looking for | Neon to favour | To complement with |
|---|---|---|---|
| Living room | Mood and decorative line | Warm white or RGB as an accent | a living room LED ceiling light |
| Bedroom | Soft light, no glare | Warm white, moderate intensity | a reading wall light |
| Kitchen | Worktop light | Neutral white, under-cabinet installation | spots or a kitchen ceiling light |
| Hallway | Guidance, low line | Neutral white, skirting installation | a hallway ceiling light |
| Office | Visual comfort | Neutral white, indirect lighting | an office ceiling light |
| Terrace or bathroom | Moisture resistance | IP65 sheath or higher | a protected connection |
Frequently asked questions
What is the difference between a classic neon and an LED neon?
A classic neon is a rigid glass tube filled with gas, which requires a high-voltage transformer and cannot be cut at home. An LED neon is a flexible cord of diodes in a sheath, low voltage or 220 V depending on the model, which bends, is fixed with clips and comes in white or RGB.
Cuttable LED strip: how does it work?
You cut only at the marks indicated by the manufacturer, every few modules: the kept part retains its circuit, the cut part no longer lights up. You then need a suitable connector or end cap, and you must check the maximum length allowed by the power supply before extending the line.
Which is the most powerful LED?
There is no single LED more powerful than all the others: the power depends on the module and the number of diodes per metre. In a living room, a flexible neon does not replace a powerful ceiling light. Compare the power stated on the label with the surface to be lit and the installation height.
How to change a recessed LED spot in the ceiling?
Switch off the power at the breaker, remove the spot's ring by unscrewing or pulling it depending on the model, unplug the connector, then replace the module with one of the same cut-out diameter and the same voltage. Check the terminal block before restoring power.
Can a flexible LED neon be installed outdoors?
Yes, provided you choose a sheath rated IP65 or higher and protect the power supply and connections, which remain the sensitive points. An indoor neon placed in the rain will not last, even if the sheath seems sealed. Also check that the clips are weather-resistant.





