E27 lighting kits
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
No products in this selection.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?
An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
An E27 lamp holder kit is a ready-to-install set built around an E27 Edison screw lamp holder: textile cable, switch, ceiling rose, sometimes a bulb. It fits a ceiling, a wall or a bedside, and the mood then changes with the bulb alone.
Which is the most powerful E27 bulb? Power depends on the lamp holder and the bulb: check the maximum permitted wattage, the luminous flux, the shape and the colour temperature to choose between two bulbs. Which is the best E27 bulb? There is no single answer, it all depends on the fixture, the use and the mood you want.
What is an E27 lamp holder kit and what does it contain?
What all these sets have in common is the cap: an E27 lamp holder, known as an Edison screw cap, the most widespread format in homes. Around it, the kit adds what you need to install it: a cable, a ceiling rose or a wall bracket, sometimes an inline switch. The bulb is chosen separately, which lets you change the mood without changing the fixture.
E27 lamp holder kits: what you find in a ready-to-install kit
A ready-to-install kit brings together the lamp holder, the textile cable, the ceiling rose and the screws. The lamp holder with switch adds the control directly on the cable, handy when no two-way switching is planned. The full range of lighting kits covers both uses, from ceiling mounting to a light point moved onto a wall.
Lamp holder, textile cable or switch: the variants that change the use
The cable length decides the height you can reach, the textile colour the overall look, the maximum wattage of the lamp holder the bulb you can fit. These three criteria are enough to choose between two kits that look similar. To place the set within the home, see all the lighting fixtures in the house helps keep a consistent line from room to room.
How to choose an E27 lamp holder kit by room?
You start from the use. This collection has 51 lighting kits with an E27 cap. A living room ceiling calls for a pendant whose drop you can adjust; a bedside wants a switch within reach; a hallway is fine with a single directed light point.
What cable length and fixing for a ceiling?
Measure the ceiling height and the distance to the floor you want before cutting or coiling the cable. A pendant above a table is usually set around 75 to 85 cm above the surface, depending on the size of the room and the height of the people using it. Above three metres of ceiling height, an adjustable kit saves you having to extend the cable.
Choosing the E27 bulb suited to the room
The lamp holder states the maximum permitted wattage: respect it, without trying to go higher. Then comes the look: a frosted bulb softens the light in a living room, a slim candle suits a visible fixture, a round globe fills an open ceiling light. The table below sums up the kits to favour room by room.
| Room or use | Type of kit to favour | Cap | Points to check |
|---|---|---|---|
| Toilet | Short pendant or ceiling light with lamp holder | E27 | Footprint, soft light, easy cleaning |
| Living room ceiling | Pendant on textile cable or LED ceiling kit | E27 | Ceiling height, diffusion, number of light points |
| Hallway or entrance | Lamp holder with switch | E27 | Cable length, wall fixing, reachable switch |
| Sheltered outdoor | Lamp holder protected against moisture | E27 | IP rating, resistant materials |
| Bedroom or bedside | Bedside lighting kit | E27 | Reading without glare, switch within reach |
| Bathroom | Recessed kit or protected lamp holder | E27 | Water zone, IP rating |
LED ceiling lighting: which kit to fit on the ceiling?
Three families share the ceiling: recessed, pendant and ceiling light with lamp holder. Recessed blends into the surface and frees up height, a pendant drops into the room and can be adjusted, a ceiling light keeps the bulb visible or under a diffuser and is changed bulb by bulb. The choice comes down to available height and the number of light points you want.
Recessed lighting kits: what they bring and what they demand
A recessed fitting disappears into the ceiling, takes up no room and can be multiplied to light a large surface or a damp room. On the other hand it requires drilling, and a bulb housed in a closed volume heats up more. Recessed lighting kits suit a bathroom or a hallway well, and recessed LED kits make replacement simpler since there is no bulb to screw in.
E27 pendant or ceiling light: which for a high ceiling?
Under a high ceiling, a pendant brings the light down to working height and avoids lighting the room from too far away. A ceiling light stays more understated above a hallway or an entrance, where you want circulation lighting. In both cases, a textile cable dresses the fixing point and lighting solutions for the home are thought through room by room.
Toilet lighting: which light to choose?
In a small room, you want a compact fixture and a soft light. A short pendant or a ceiling light with an E27 cap is enough, provided it does not drop into your line of sight and can be wiped clean in one go. A warm white makes the room more welcoming than a cool white, which hardens the angles.
Toilet lighting: avoiding the clinical look
The clinical look comes less from the fixture than from the bulb's rendering: a very cool white on pale walls whitens everything. A frosted warm white bulb, with wide diffusion, lights without a harsh point. A pendant set short above the ceiling of the room remains the simplest solution to install and maintain.
Damp toilets: what a protected lamp holder changes
When the room is damp or poorly ventilated, the lamp holder itself must be designed for that environment, with a suitable IP rating and materials that do not rust. Brass, treated steel or technical plastic age better than bare metal. Recessed lighting for a damp room also limits the bulb's exposure.
Outdoor E27 bulb: what to check before installing outside?
Outside, everything comes down to protection. The lamp holder and the fixture must be designed for moisture and rain, with an IP rating consistent with the exposure, and materials that resist frost as well as UV. A standard E27 bulb is not enough if the fitting is not made for outdoor use.
IP rating and where to place the lamp holder
A spot sheltered under an awning or a roof overhang gets indirect rain; an exposed facade takes driving rain and wind. The IP rating of the fixture is read before purchase, and it must at least match the real constraint of the location. If in doubt, a light point set further back is better than a lamp holder in full wind.
Materials and maintenance of an outdoor fixture
Materials treated against corrosion hold up better through the wet season. An annual check of the lamp holder, a dry dusting and replacing the bulb with an identical model are enough to keep the set reliable. To compare the shapes and brackets available, the Designix lighting universe groups the fixture families by use.
Warm white or cool white: which light for each room?
Warm white gives an amber, restful light, neutral white comes close to daylight, cool white leans blue and marks contrasts more. A living room, a bedroom or a toilet calls for warm; a kitchen, a workshop or an outdoor area benefits from a cooler white, which renders details better.
Colour temperature: the reference to remember
Colour temperature is measured in kelvins: around 2700 to 3000 K you are in warm, around 4000 K in neutral, above 5000 K in cool. This reference is used to compare two bulbs with each other, never to describe the light of a specific fixture. A relaxation room stays warm, a worktop moves willingly to neutral.
Luminous flux and wattage: the right comparison
Wattage tells you consumption, not the amount of light. Luminous flux, expressed in lumens, shows what the bulb actually gives out: two bulbs of the same wattage can light very differently depending on the technology. To choose, you therefore compare lumens with each other, provided you stay within the maximum wattage stated by the lamp holder.
| Mood | Perceived rendering | Recommended use |
|---|---|---|
| Warm white | Amber tint, soft light | Bedroom, living room, toilet, relaxation corner |
| Neutral white | Balanced white, close to daylight | Kitchen, entrance, office, staircase |
| Cool white | Bluish white, marked contrasts | Garage, workshop, outdoor, work station |
Can you replace a classic bulb with an LED in an E27 kit?
Yes: an LED bulb with an E27 cap screws into an E27 lamp holder in place of an incandescent or halogen bulb. Three conditions are enough: stay within the maximum wattage stated by the fixture, check compatibility with any dimmer, and choose a shape that fits into the diffuser without forcing.
Compatibility with dimmers and closed fixtures
Some LEDs cannot handle dimming and flicker or switch off at low intensity: the dimmer must be stated as compatible. In a closed fixture or a box, heat escapes poorly and the LED's life suffers. An open volume, a ventilated diffuser and a frosted bulb settle both points.
Choosing the right E27 bulb shape: candle, globe or standard
The candle, slim and elongated, suits visible fixtures such as a chandelier or a wall light. The globe, round, fills an open ceiling light. The standard shape remains the most versatile for general use, and a frosted finish avoids the harsh point in a living room. To equip a bedroom, bedside lighting kits are designed for reading without glare.
How to install and maintain an E27 lamp holder kit?
First fix the ceiling rose or the bracket to the ceiling or wall, run the cable to the desired length, then screw the E27 bulb into the lamp holder without forcing. Power is cut at the breaker before any work. If the job is beyond your skills, a qualified electrician takes over the point in a few minutes.
Fitting the lamp holder, the cable and the ceiling rose
Locate the fixing, check that it holds in the bracket, then lock the ceiling rose. The textile cable is cut to the right length and stripped over the small section needed. Once the lamp holder is connected, switch the power back on and test before screwing in the bulb, then close everything up. The ready-to-install kits come with the matching screws.
Maintenance: cleaning the lamp holder and changing the bulb
Cut the power, dust the lamp holder dry with a soft cloth, without liquid products. The bulb is replaced cold with a model of the same cap and equivalent wattage. A visual check of the cable and the lamp holder once a year is enough to spot wear before it becomes a nuisance. Other lighting kits to assemble yourself follow the same maintenance logic.
Frequently asked questions about E27 lamp holder kits
What wattage for an E27 bulb?
It depends on the fixture, which always states a maximum wattage not to be exceeded, and on the amount of light you want. In LED, a much lower wattage than an incandescent bulb is enough for equivalent lighting. The most reliable reference remains the luminous flux stated on the packaging.
What is the equivalent of an E27 bulb?
E27 designates an Edison screw cap, the most widespread format in homes. An E27 bulb therefore screws into any E27 lamp holder, whether LED, halogen or incandescent. To choose, you compare the shape, the colour temperature and the wattage permitted by the fixture's lamp holder.
Is 40 watts a lot?
It depends on the technology used. Forty watts is a common wattage for an incandescent bulb, but high for an LED, which lights just as much with far fewer watts. The useful reference remains the luminous flux and the limit stated by the lamp holder, not the figure alone.
What lights whiter, warm white or cool white?
Cool white, in the high tints, lights whiter with a slightly bluish rendering. Warm white leans amber and appears softer. Cool suits a workshop, a garage or an outdoor area; warm suits a living room, a bedroom or a toilet.
What are the drawbacks of LED lamps?
LEDs handle heat poorly: a closed or poorly ventilated fixture shortens their life. Their light is sometimes seen as more directional, and some entry-level bulbs have a less faithful colour rendering. Not all are compatible with a dimmer, which should be checked before purchase.
The collection brings together pendants, lamp holders with switches and screw-in bulbs, available in go to the lighting kits collection and in the other lighting kits for the home. Depending on the room, you can usefully complete the set with recessed ceiling spots or bedside lamps and reading lights.
Secure payment, tracked delivery, returns and Designix customer service accompany every order. Need help matching two light points? choosing a fixture suited to the room gives you the method, room by room.
