Dimmable E14 LED bulbs

First check the socket of your light fixture (E14, the small screw socket) and the dimmable-compatible mention on the product sheet. Then choose the wattage, 3, 5 or 7 W, according to the size of the fixture and the number of light points to illuminate.

What is an E14 dimmable LED bulb?

An E14 dimmable LED bulb screws into a small screw socket and changes its intensity when you turn the dimmer. The models in this collection are LED, cool white, and cover the 3, 5 and 7 W wattages.

E14 dimmable LED bulb: what the dimmer changes

Without a dimmer, a bulb gives a single intensity: all or nothing. With one, you lower the light in the evening for a dinner or a read without changing the fixture. The models in this selection are advertised as dimmable-compatible, in a tube shape and a contemporary style, in various materials (glass, ceramic, metal, crystal, linen). To compare with the other dimmable families, browse the dimmable LED bulbs in the catalogue.

Dimmable E14 LED bulbs: dimmable and dimmer, the same thing?

Dimmable describes the bulb, dimmer refers to the mechanism of the fixture. A dimmable E14 bulb accepts dimming, provided the installed dimmer handles it. The two words therefore go together: the bulb must be designed for dimming, and the fixture must be fitted with a dimmer. Find the small socket models in the dimmable E14 socket bulbs.

The characteristics of the selection

Do LED bulbs work with a dimmer?

Yes, provided the bulb is designed for dimming and the installed dimmer accepts it. The E14 dimmable LED bulbs in this collection are advertised as dimmable-compatible, but an old dimmer or one with a low load may cause flickering. Test one bulb before fitting out an entire fixture.

Cool white dimmable E14 LED bulb: how to spot it on the product sheet?

Three pieces of information are enough: the socket (E14), the colour temperature (here cool white, 4500 to 6500 K) and the dimmable-compatible mention. The wattage, 3, 5 or 7 W, then follows. If you hesitate between several small sockets, compare with the E14 small socket bulbs then with the whole bulb range of the catalogue.

Why does an old dimmer make an LED flicker?

A dimmer designed for power-hungry bulbs handles the low loads of LEDs poorly. The light may blink, buzz or not go down very low. In that case, keep the dimmer and try one bulb: if the result is good, the rest of the fixture will follow. If not, the dimmer is at fault, not the bulb.

Is it possible to replace a halogen bulb with an LED using a dimmer?

Yes, if the socket is identical and the dimmer supports the low loads of LEDs. Your halogen bulb consumes more; switching to a 3 to 7 W LED, some old dimmers dim poorly and the light flickers. First check that your fixture is indeed E14.

40w dimmable E14 LED bulb: how to read the advertised wattage?

The figure 40 W refers to the wattage of the halogen or filament bulb you are replacing, not that of the LED. The models in this collection are advertised at 3, 5 and 7 W. No numerical equivalence is promised here: simply compare the light output in the room. For a large socket, see the E27 LED bulbs and their dimmable versions in the large socket dimmable bulbs.

Replacing a halogen bulb: the steps

1. Cut the power at the circuit breaker.
2. Note the socket of the fixture, here E14.
3. Unscrew the old bulb once it has cooled.
4. Screw in the LED without forcing, then test the dimming across the full range.

If the socket of your fixture is not E14, other references exist for the other G4 and G9 sockets.

Which wattage and light colour to choose for a dimmable E14 bulb?

Wattage is chosen according to the size of the fixture and the desired effect: 3, 5 or 7 W in this collection. The colour temperature, however, is identical on all models: a cool white between 4500 and 6500 K, which gives a crisp light rather than a warm atmosphere.

4000k dimmable E14 LED bulb: what shade does the collection offer?

4000 K does not appear in this selection: all models are cool white, from 4500 to 6500 K. This shade lights frankly, which suits a kitchen or a bathroom. For a softer light in the evening, compare with the 3000 K bulbs or the 2700 K shades, warmer.

Which wattage for a small fixture?

On a wall light or a bedside lamp, 3 W is often enough; go to 5 W if the room is dark, and to 7 W for a chandelier with several light points. Since dimming lowers the intensity, starting a little higher remains comfortable. The choice therefore comes down to the number of bulbs and the surface area, not a single figure.

In which fixtures and rooms to install an E14 dimmable bulb?

Check the socket of your fixture: wall lights, small chandeliers and bedside lamps are often E14. This collection is advertised for the bedroom, kitchen, living room, bathroom and toilet, indoors, with an IP20 protection rating.

LED wall light: which socket to check before buying?

The socket belongs to the fixture, not the bulb: read it on the socket or in the instructions. If it is E14, this collection fits. If the socket is G9, turn to the G9 bulbs. To furnish an entire wall, also take a look at the living room bulbs.

Chandelier and ceiling light: when does an E14 bulb fit?

A chandelier with small arms, a compact ceiling light or a pendant with several sockets often accept E14; this is not a general rule, each fixture has its own socket. The advantage of a dimmable bulb is clear there: several light points dim together, without losing consistency. For a bedroom, see the bedroom bulbs and all our Designix light fixtures.

How to install and maintain an E14 dimmable LED bulb?

Cut the power at the circuit breaker, let the bulb cool if it has just been on, then screw it in without forcing into the socket. Clean cold with a dry cloth: the materials of the collection, glass, ceramic, metal, crystal and linen, do not require any particular product.

Screwing in the bulb: the gestures that avoid mistakes

Screw until contact, without tightening hard: forcing damages the socket and can break the envelope. After fitting, check that the bulb does not move, then switch back on and slide the dimmer from minimum to maximum. This quick test spots any flickering before the fixture is put back up. The models with a contemporary style and a tube shape can be found in the contemporary style bulbs.

Maintaining an E14 bulb: cold and dry

Unplug or cut the power, wait for it to cool, then wipe with a dry, soft cloth. No liquid, no damp sponge: the envelopes in glass bulbs, like the ceramic, metal, crystal or linen finishes, are content with a dusting. A fine dust on the glass is enough to dull the light, cleaning twice a year is a good benchmark.

How to choose, pay for and receive your E14 dimmable LED bulb?

The collection is chosen on three points: the socket of your fixture, the desired wattage and the dimmable compatibility. All models are guaranteed for 2 years, with secure payment, tracked delivery, returns and Designix customer service to support you before and after purchase.

A concrete example for a living room or a bedroom: the Lueur Polaire, 2 powerful cool white E14 LED bulbs, in E14 and G4 sockets, IP20, advertised as dimmable-compatible. Then go through the bulb range to compare the other families, or through all our Designix light fixtures if you are fitting out an entire room.

Frequently asked questions