Dimmable LED strip lights

This selection is also available in our French store: Réglettes LED à variateur

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
Dimmable LED strip lights
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

A dimmable LED strip light is chosen on three points: the length of the line to be lit, the protection rating of the room and the compatibility of the dimming module. The dimmer acts on the intensity, never on the colour: the same strip serves as work lighting above a worktop and as discreet accent light in the evening.

How does a dimmable LED strip light work?

A dimmable LED strip light includes a dimming module placed on the power circuit: it reduces or increases the current sent to the LEDs, which varies the light intensity. The colour temperature remains that of the model, only the level changes. Adjustment is by dial, button or remote control depending on the version.

What dimming changes day to day

The same strip light goes from a crisp light for cooking or DIY to a low level for moving around without waking the house. On a continuous line, the level is adjusted according to the time and the task, without multiplying the sources. The models presented in all the LED strip lights in the catalogue are distinguished first by this control mode.

Dial, button or remote control

The dial is turned by hand and remains the most direct adjustment when the profile is accessible. The button works by successive presses and suits strip lights placed near a worktop. The remote control is used when the strip light is fixed high up, behind a piece of furniture or in a hard-to-reach corner.

How do you know if a dimmer is LED compatible?

A dimmer is LED compatible when its data sheet states an LED load and its minimum power remains below that of the connected strip lights. Check the total power of the circuit, the minimum position supported and the dimming technology indicated before connecting. A doubt is resolved by testing, in the low position.

The minimum load, a point to check before connecting

Add up the power of the strip lights connected to the same dimmer and compare it with the stated low threshold. Below this threshold, the strip light may switch off, flicker or start late. Connection to the mains is made on a standard circuit, as for the models gathered in the strip lights to connect to the mains.

Why an LED strip light flickers in the low position

Flicker almost always signals a poorly matched dimmer and strip light, or too low a load on the circuit. It can also come from a power supply of uneven quality. Before changing the strip light, test the same intensity on another socket and check the connected load.

Where to install a dimmable LED strip light in the home or workshop?

Under a kitchen unit, above a worktop, along a shelf, in a dressing room, a garage or a workshop: the strip light is used wherever the light must adjust to the task. In a damp or dusty room, a sealed model is essential, and the general lighting catalogue helps to situate the other solutions.

Kitchen and worktop: the line that relieves the eyes

Placed under the upper unit, the strip light illuminates the chopping board and the hob without casting a shadow on the hands. A closed diffuser limits soiling near the sink. The models in the collection designed for damp rooms are also suitable for a worktop exposed to splashes.

Garage, workshop and technical room: seeing without glare

Above the workbench or along the storage, the high intensity is used for precise work, the low position for simply passing through. Dust requires a closed profile and regular cleaning. See the models intended for the garage and the strip lights designed for the workshop, two uses that do not require the same length.

Dimmable strip light, cuttable LED tape or ceiling light: which solution for lighting a room?

The strip light illuminates a precise line and is adjusted according to the task; the cuttable tape follows angles and niches; the ceiling light, wall light or chandelier illuminate a wide area from the ceiling or the wall. The choice depends on the surface to be covered and the installation possible.

Dimmable strip light, cuttable tape, ceiling light or wall light: which solution for which need
Solution What it lights Where it suits Point to check
Dimmable LED strip light A continuous line: worktop, shelf, workbench Kitchen, dressing room, workshop, garage Dimmer compatibility and useful length
Cuttable LED tape A free shape, angles and niches included Under-unit, niche, furniture outline Cut marks and available connectors
LED ceiling light The whole room from the ceiling Living room, bedroom, kitchen Ceiling height and weight of the light
LED wall light A wall, a corridor, a headboard Corridor, entrance, living room, bedroom Position of the wall connection
LED chandelier A decorative central light Living room, dining room, entrance Suspension height and room volume

The cuttable tape is cut on regularly spaced marks, with the power off, and each portion keeps its own connector. For a large room, a central light point remains more effective than a line. The versions with a sensor take over in a corridor or on a staircase.

What length and protection rating should you choose for a dimmable strip light?

The length is measured on the line to be lit, not on the furniture: short for a worktop, longer to serve several successive surfaces. The protection rating depends on the room, high in a bathroom, garage or outdoors, standard in a dry office or dressing room.

Which protection rating and which mounting according to the room
Room Main constraint Protection rating to aim for Type of installation
Kitchen, worktop Grease and splashes Closed diffuser, high rating near the sink Under the upper unit
Bathroom Humidity and steam High rating, IP65 for exposed areas Wall mounted, away from direct splashes
Garage and workshop Dust and impacts Closed profile, high rating Ceiling or above the workbench
Outdoors and terrace Rain and sun IP65 Under a canopy or wall mounted
Dressing room and office None, dry room Standard rating Under a shelf or as a wall light

For a damp room, compare the sealed models for damp rooms and the references with reinforced IP65 protection. A strip light with integrated LEDs cannot be cut: the profile and the circuit are designed for a given length, so an unsuitable format is replaced by a cuttable tape. Outdoors, look at the references intended for outdoors and the sealed outdoor versions.

How to adjust the dimmer to obtain the right intensity?

Gradually increase the intensity until the task is comfortable without glare, then go down one notch: this is often the most accurate setting. Keep the high position for working or cleaning, the low position for moving around in the evening or staying up without frontal light.

Adjusting according to the task: work, meals, night light

Above a worktop, the level must allow a label to be read without casting a shadow on the hands. For a meal, go down one notch so that the table remains lit without harshness. As a night light, the lowest position is enough to trace a path in a corridor. A variable strip light follows a continuous progression, a strip light with several intensities offers only a few fixed levels.

Avoiding glare and flicker

Direct the profile towards the surface to be lit rather than towards the eyes, and keep the diffuser clean: a film of grease diffuses light poorly. If flicker persists at low intensity, review the dimmer load before changing the strip light. Slight flicker in the minimum position is common, marked blinking is not.

How to install and maintain a dimmable LED strip light?

Locate the line and the fixing points, screw the profile to the intended support, connect the power supply to the mains, then adjust before tightening definitively. Maintenance is limited to dusting the diffuser with a dry cloth, with the power off, and checking the tightness of the fixings once a year.

Fixing and connection

The profile must be supported over its entire length, not only at the ends, otherwise it deforms and the light ripples. Leave the dimming module accessible after installation. Out of reach of a socket, a rechargeable strip light avoids running a cable, with a battery life that depends on the use and the level chosen.

Cleaning the diffuser and durability

A dry cloth is enough; abrasive products dull the diffuser and scratch the profile. In a dusty room, a closed profile heats up more: dust often and do not enclose the strip light in a box. It is heat dissipation that guides the service life, more than the number of hours lit.

What budget should you plan and which criteria to look at before buying?

The budget varies according to the length, the profile and the control mode: a dial remains the simplest control, a remote control or a motion sensor raise the bill. Look first at the useful length, the protection rating and the dimmer compatibility, in that order.

What raises the price of a dimmable strip light

A longer profile, a closed diffuser, a remote control or a battery power supply add material and electronics. Models with a sensor include a detector that triggers the light on passage, useful in a corridor or a technical room, and the mains-powered sensor avoids the battery.

Mistakes to avoid before ordering

Ordering without measuring the line, forgetting the protection rating of the room or connecting a strip light to a dimmer intended for another load: three classic reworks. Also take the time to compare the different LED strip lights with each other before confirming, and return to the lighting catalogue if the project covers several rooms.

Secure payment, tracked delivery, returns and Designix customer service: the order can be tracked, and a return remains possible if the length does not fit.

A doubt about the useful length or the protection rating to aim for? The Designix team answers before the order, with the data sheet in front of them.

Frequently asked questions

Is it possible to use LED bulbs with a dimmer?

Yes, provided that the bulb is stated as dimmable and that the dimmer accepts LED loads. A non-dimmable LED bulb behaves badly in the low position: it flickers or switches off. Check both mentions, dimmable bulb and LED-compatible dimmer, before mixing the two on the same circuit.

Cuttable LED tape: how does it work?

A cuttable LED tape has cut marks at regular intervals: cut only on these marks, with scissors, with the power off. Each cut portion must then be powered again by a connector or a new cable start to work correctly. A cut off the mark leaves a section that no longer lights up.

Can a dimmable LED strip light be installed in a bathroom?

Yes, by choosing a model whose protection rating matches the humidity, such as a sealed or IP65 strip light, and by keeping it away from direct splashes from the shower or the washbasin. The dimming module must remain accessible and out of reach of water. A bare model, without a closed diffuser, has no place near a water point.

Can a dimmable LED strip light stay on for a long time in a workshop?

An LED strip light withstands prolonged use; it is the heat dissipation through the profile that limits its service life. In a dusty room, a closed profile heats up more: dust the diffuser regularly and avoid enclosing the strip light in a box or behind a partition without air.

Is a special switch needed for a dimmable LED strip light?

No: the adjustment is made on the dimmer integrated in the strip light or on the control supplied with it, the wall switch only turning it on and off. A simple switch is therefore enough, without an additional wall dimmer to install. Two settings in series complicate the adjustment of the low level and blur compatibility.

Our advice for choosing
An LED dimmer strip lets you adjust the light from a single strip to suit the use: worktop, accent lighting or night light. This collection is chosen according to the room to be lit, the usable length, the protection rating and the brightness adjustment method.