Designer cordless table lamps
This selection is also available in our French store: Lampes à poser sans fil design
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
What table size for how many people?
Which tabletop material should I choose?
Extendable or fixed?
How do I care for the tabletop?

The right furniture, in the right place
Check the dimensions with our fit checker and receive pieces made to last. Unsure? Our team will answer your questions.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A design cordless table lamp lights without a cable plugged into the mains: it runs on a rechargeable battery and moves from one room to another. It serves as accent lighting for reading, dining or setting a mood, never as the only source for lighting a large room.
What is a design cordless table lamp?
A cordless lamp is picked up in one hand and set down elsewhere: that gesture defines it, well before its spec sheet. The rechargeable battery replaces the cord, the lamp follows the reader from sofa to bedside, and nothing crosses the floor.
Design cordless table lamp: what it changes day to day
It removes the visible cable, and therefore the extension lead across the walkway and the socket you have to free up. You move it to read on the sofa, to light a corner of the table during aperitif, to serve as a night light in the hallway. Its role remains that of accent lighting: it accompanies a room, it does not bathe it entirely. Count on two to three low sources in a living room for a comfortable result, and keep the ceiling light or wall lights for general lighting.
Cordless electric table lamps: what the term covers
The expression covers two families that are often confused. The first runs on a battery and is only plugged in to recharge, a few hours a week. The second is a classic wired table lamp, permanently connected to the mains, which you move only within the limit of its cable. The two look alike when switched off, but they are not lived the same way. If you are after total mobility, the battery version is the one to choose. For a permanent spot near a socket, the wired version remains simpler to use and requires no recharging.
To compare silhouettes before deciding, browse all our lighting, across every family.
What light does a cordless LED table lamp give?
A cordless LED lamp gives a light that produces little heat, which the shape of the shade or head directs towards the book, the worktop or the wall. Choose a warm tone for the evening and a more neutral tone for working. The source is either integrated or interchangeable in a small or large base.
Cordless LED table lamps: directing the light
The result depends less on the diode than on the housing. A cylindrical fabric shade diffuses widely and suits ambience; a closed metal head projects a clean cone downwards and is used for reading. In practice, a warm light sits around 2700 to 3000 K, a work light rather towards 4000 K: that is a comfort marker, not a rule. For interchangeable sources, compact formats take a small E14 base, larger volumes a large E27 base, which leaves the door open to changing the bulb. The design LED table lamps bring both approaches together.
Halogen design: why we are moving away from it
A halogen bulb heats strongly, consumes a lot for the light it gives and is hardly replaced any more. On a cordless lamp, the heat weighs twice: on battery life and on the proximity of hands. Switching to LED keeps the look of the fixture and changes only the source, when the base is compatible. Check this point before buying an old lamp or a piece in the halogen design spirit: the base decides everything.
Where to place a cordless lamp in the living room, bedroom or office?
In the living room, it sits on the coffee table or a side table, at seat height, to light without dazzling. In the bedroom, on the bedside table, its light stays low and warm. In the office, it is placed on the side opposite the writing hand. Everywhere, the rule is the same: the source must not come into the eyes.
The most beautiful living room lamps, how to recognise them
There is no ranking: a beautiful living room lamp is judged by its stability, its light and its place. A wide base does not tip over when moved, a shade that hangs below the line of sight does not dazzle from the sofa, a contained format does not overcrowd the coffee table. Material counts too: it should respond to the wood of the furniture or the fabric of the sofa, not compete with it for attention. The design table lamps for the living room and the modern living room lamps play two different registers, to be chosen according to the rest of the room. For an already dark interior, the black finishes for the living room blend into the decor.
Design bedside lamp: the criteria that matter
Three points decide: the height relative to the mattress, a warm light at low intensity, the footprint on the bedside table. A compact model in bedside ceramic or in black metal for the bedside leaves room for the book and the glass of water. Cordless, it frees the cable behind the furniture, provided you accept regular recharging. Find the models designed for the bedroom if softness is your first concern.
In the office, the same reasoning applies: office table lamps, adjustable preferably, to aim at the keyboard without creating glare on the screen.
How to choose the material and finish of a cordless table lamp?
Material decides the light as much as the look. Wood softens the light and sets a Nordic style, ceramic gives a matte opaque that directs the flow up and down, metal reflects a clean light, crystal makes it sparkle and linen diffuses it widely. The finish matches the lamp to the rest of the room.
| Material | Light rendering | Style | Care | Where it works |
|---|---|---|---|---|
| Wood | Warmth, softened light | Nordic, natural | Dry cloth | Living room, bedside |
| Ceramic | Opaque, flow directed up and down | Understated | Soft cloth, no abrasive | Bedside, console |
| Metal | Clean reflection, contrast | Modern, workshop | Microfibre | Office, living room |
| Crystal | Sparkles, glittering light | Classic | Delicate washing | Side table, entrance |
| Linen (shade) | Wide, soft diffusion | Natural | Dry dusting | Bedroom, living room |
Luxury design decor object: crystal, brass and golden finishes
A luxury design decor object stands out by its material, its finish and the accuracy of its proportions, not by a label. A lamp that stays beautiful when switched off fulfils this role: the crystal models play on sparkles, brass and the gold and black colours on contrast. Look at the evenness of an assembly and the cleanliness of a weld before deciding.
Wood, ceramic or metal: the rendering of light
The wooden lamps warm a bright room and match the Nordic style. Ceramic gives a matte opaque, ideal for directing light up and down without dazzling. Lacquered metal stays clean, easy to wipe, perfect on a worktop, and a linen shade tempers any source that is too direct. One strong material per lamp, the rest as an echo.
How to connect several lamps to a single electrical supply?
Add up the wattage of the lamps and compare it with what the circuit and the multi-socket can take: that is what prevents overload. For a fixed installation, cut the power and tap each point onto the existing supply, with protected connections in a box. A cordless lamp removes the cable problem altogether.
Wired wall light: the solution when you want something fixed
The wall light frees up the surface and lights a wall, a hallway or a headboard. It does, however, require a nearby supply and drilling: reserve it for permanent spots. If the wall is already equipped, it is often the best place for general lighting.
Multi-socket or branching: the limits to know
A multi-socket adds up, it does not multiply the capacity of the circuit. Avoid stacking several powerful fixtures on it along with loads that heat up, keep cords uncoiled, and prefer fixed branching in a box when the need is permanent. For delicate volumes, adjustable lamps on battery simply avoid the whole question of wiring.
How to recharge and care for a cordless table lamp?
Recharge the lamp before the battery is completely empty and keep the cable out of walkways. For cleaning, a soft cloth is enough: dry on wood and linen, barely damp on ceramic and crystal. Avoid abrasive products on lacquered metal, which mark the finishes.
Recharging without damaging the battery
Regular recharging, without waiting for it to run flat, extends the battery's endurance. Keep the charging cable accessible, away from furniture legs and walkways, and unplug once charging is complete. If the lamp stays outside or near a window, a sufficient protection rating (IP44 and above for water splashes) is a useful marker to check.
Cleaning according to material
Wood and stone: dry cloth, never standing water. Glazed ceramic and crystal: soft cloth slightly damp, dry immediately to avoid marks. Lacquered metal: microfibre only. Fabric shade: dry dusting, soft brush, no water that stains.
How to light a wooden table without a tablecloth with a cordless lamp?
On a wooden table without a tablecloth, place two cordless lamps at each end rather than one in the centre: each guest is lit without a shadow in the middle of the tabletop and no cable crosses the wood. Protect the top with placemats and trivets, and keep a warm, low light.
Eating on a wooden table without a tablecloth: where to place the light
The source drops below the guests' line of sight, around 30 to 40 cm above the tabletop for a table lamp, and stays away from the plates. Two light points are better than one big one: you see what you are cutting without casting a shadow in the centre. A placemat under each plate protects the top.
Warm ambience or work light: the right setting
During the meal, lower the intensity and stay on a warm tone. To clear the table, write or do homework, turn it up and aim at the tabletop. The wooden table lamps for the living room and the black wood versions handle this dual function without breaking the mood.
Cordless lamp, wired lamp or wall light: what to choose?
The cordless lamp wins when you need to move the light, avoid a cable or do without work. The wired lamp suits a permanent spot near a socket. The wired wall light frees up the surface but requires drilling and a nearby electrical supply. The choice depends first on the space available.
| Solution | Power | Installation | Versatility | To plan for |
|---|---|---|---|---|
| Cordless table lamp | Rechargeable battery, occasional charging | Moves around, no channelling | High, all rooms | Regular recharging, cable to store |
| Wired table lamp | Mains, socket or base | Near a socket | Medium | Visible cable, extension lead possible |
| Wired wall light | Mains, fixed supply | Drilling and connection | Low, one fixed point | Electrical supply nearby |
| Cordless adjustable lamp | Battery, movable head | Moves and can be aimed | High on a worktop | Pivot and tightening to check |
When mobility matters more than anything
Rental, furnished flat, stone wall, no socket: the battery solves everything. One lamp per use is often enough, one for reading and one for ambience, and you move them according to the time. The LED for the office and the LED lamps for the bedroom cover these two needs with the same ease of installation.
When a fixed point is preferable
A hallway, a headboard, a living room wall that must be lit every evening: fixed avoids recharging and gives a more generous light. For a permanent worktop, a fixed desk lamp remains the simplest choice, supported by the design white lamps in bright rooms.
Buy with confidence: secure payment, tracked delivery, accepted returns and Designix customer service to check a base, a dimension or a compatibility before confirming. Start with the Designix lighting catalogue, then refine by room and by material.
What are the most beautiful living room lamps?
There is no objective ranking: a beautiful living room lamp is judged by its light and its place. Look for a stable base, a shade that diffuses without dazzling from the sofa, a material that responds to the wood or fabric of the room, and a format that does not overcrowd the coffee table.
How to choose a design bedside lamp?
Three points decide: the height relative to the mattress, a warm light at low intensity so as not to wake anyone, and the footprint on the bedside table. A cordless model frees the cable behind the furniture, provided you accept regular recharging.
Italian design bedside lamp: what sets it apart?
Italian design is recognised by simple shapes, accurate proportions and worked materials such as ceramic, glass or lacquered metal. On a bedside lamp, this gives understated and often compact silhouettes, with a rather warm, directed light. The finish counts as much as the shape.
How to connect several lamps to a single electrical supply?
Add up the wattage of the lamps and compare it with what the circuit and the multi-socket can take: that is what prevents overload. For a fixed installation, cut the power and tap each point onto the existing supply, with protected connections in a box.
Does a wired wall light replace a cordless table lamp?
No, they do not meet the same need. The wired wall light is fixed: it lights a wall, a hallway or a headboard, but requires an electrical supply and drilling. The cordless lamp can be placed wherever you want, without work, at the cost of regular recharging.





