Wireless touch-controlled bedside lamps
This selection is also available in our French store: Lampes à poser tactiles sans fil de chevet
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Place your hand flat on the base: the light steps up one level, a second touch dims it. A cordless touch bedside lamp removes the switch you have to hunt for in the dark and the cable running to the socket. It recharges, moves from one piece of furniture to another and is adjusted with a fingertip.
- What is a cordless touch lamp
- What to look for
- Common faults
- Where to place it at home
- A bedroom with a single socket
- Styles and materials
- Recharging and care
- Choosing and ordering
What is a cordless touch bedside lamp?
A cordless touch bedside lamp switches on when you brush the base or the body of the fitting: no switch to hunt for, no cord to follow. It runs on a battery or rechargeable cells and moves freely. The touch control usually sets the brightness in steps, which makes it gentle when you wake up and when you read.
How does a touch control work on a bedside lamp?
The sensor is capacitive: it detects a fingertip on a defined area of the base or body. A brief press switches on, further presses raise the brightness in steps, a long press switches off on most models. The sensitive area stays reachable by touch, without looking, which matters when you switch off in the middle of the night. A capacitive sensor responds poorly through a very thick material: that is a design fact, not a user fault. Compact formats are gathered in our design table lamps for the bedroom.
Cordless: rechargeable battery or cells?
Two families coexist. The rechargeable battery plugs into a cable, often USB, and avoids buying cells again and again. Rechargeable cells can be replaced and keep the lamp usable even when the battery is flat, provided you keep spares. The model's specification sheet states the power type and the charging method: that is the line to read before choosing. The rest of the catalogue can be browsed in our lighting catalogue.
What is the best cordless bedside lamp?
The best cordless bedside lamp is the one whose light is finely adjustable, whose sensor responds first time and which recharges without a struggle. Check the stability of the base, how easily the sensor is found by touch and the specification sheet: stated runtime, battery type, colour temperature.
What to check on a touch model's specification
Four lines are enough: the power type, the colour temperature, the base material and the shade diameter. For a bedroom, light around 2700 to 3000 kelvins gives a warm white, more restful in the evening than a neutral white at 4000 kelvins. A wide base sits better on a narrow shelf than a conical one. These benchmarks are industry orders of magnitude, not a measurement specific to one model.
The criteria that really matter at the bedside
Fine adjustment comes before the number of functions: two or three well-spaced steps are worth more than an imprecise dimmer. Then the responsiveness of the sensor, then how easy it is to recharge, then the footprint. Our LED models for the bedroom keep the light warm without heating the shade. Torn between two formats? Designix customer service answers on dimensions and material before you order.
What problems can occur with a touch bedside lamp?
Touch faults often come from a dirty, damp or greasy sensor, a battery that is too low or a gloved finger. A capacitive sensor does not always respond through a thick material. Before concluding there is a fault, clean and dry the contact area, then fully recharge the fitting.
The sensor no longer responds: common causes
A trace of cream on the base, a drop of water, a wool glove: the contact no longer passes. Wipe with a soft dry cloth and test with a bare hand. If the lamp sits on a very thin metal tray or against a wall, move it to rule out interference. On a stepped model, too long a press can also be read as a switch-off. Our adjustable lamps are tested the same way, contact by contact.
Runtime and charge: what wears out the touch control
When the battery drops too low, the control becomes sluggish or responds only after several attempts: that is a sign of charge, not a breakage. Recharge with the original cable, all the way, then test again. Repeated partial recharging muddles the diagnosis. No service life is guaranteed here: we describe a symptom and what to do. For a distinctly softer light in the evening, compare with the design LED range.
Where to place a cordless touch lamp at home?
On a bedside table, the cordless touch lamp sits at mattress height to light without dazzling. In the living room, it finds its place on a console or a side table, in the study on the desk. The absence of a cord lets you move it from one room to another as needed.
On a bedside table, what height and what size?
Aim for a base that reaches roughly mattress level, or just below: the light then falls on the book, not in your eyes. A wide shade diffuses more softly than a narrow stem, but takes up space. On a shelf 30 to 40 cm deep, a compact format leaves room for the glass of water and the phone.
In the study, lighting without cluttering the desk
On a desk, the cordless touch lamp avoids the cable running across documents. Place it on the opposite side to your writing hand, so the shadow does not cross the page. A low shade aimed at the desk limits glare on the screen. Our table lamps for the study cover this use, and our table lamps for the living room take over on a console.
| Room | Lighting need | Suitable format | Point to watch |
|---|---|---|---|
| Bedside table | Reading and waking in soft light | Small compact format, stable base | Height relative to the mattress, access to the sensor |
| Living room, console or side table | Ambience and reading corner | Taller model, wide shade | Consistency with the furniture and other light sources |
| Study | Light close to the desk | Compact format, adjustable head if needed | No glare on the screen |
| Hallway or corridor | Night light and nocturnal marker | Small cordless format | Easy recharging nearby |
How do you light a bedroom with only one socket?
To plug in several lamps on a single supply, use a power strip or a socket rail connected to the existing socket, without stacking extension leads. The combined wattage of the fittings must stay compatible with the circuit. If the points multiply, have the installation checked by an electrician.
Power strip and socket rail: the right practice
A single power strip, placed on the floor and not balanced on the bedside table, replaces three extension leads in a row. Add up the wattages shown on each fitting and compare with the circuit rating: beyond that, spread the load over another socket in the room. Stacked plug blocks are to be avoided, as are cables running under a rug.
Wired wall light or table lamp: which to choose at the bedside?
A wall light frees the shelf and fixes the light permanently, but requires work and an electrical supply in the right place. The cordless touch table lamp moves, changes room and needs a socket only for recharging, not for switching on. In a bedroom with a single socket, it is often the simplest solution: the socket serves the phone, the lamp lives on its battery.
Which style to choose: Italian design bedside lamp, mushroom or original?
Italian style favours fine lines and worked materials, the mushroom lamp embraces a round retro shape, driftwood brings a raw finish. Ceramic, wood, metal or linen change the light and the mood: choose according to the furniture and the tone of the bedroom.
Mushroom bedside lamp and Italian design: the landmarks
The mushroom lamp tops a slim base with a rounded shade: the light goes downwards and to the sides, gentle on waking. Italian design is recognisable by a slender silhouette, a worked base and a discreet shade, often in metal or glass. In both cases, check that the sensor stays accessible and that the base fits on the shelf. Our ceramic bedside lamps offer a solid base that stabilises the whole.
Wood, ceramic, linen: which material for which bedside?
Wood and driftwood warm a raw bedside or a Nordic decor, with a grain that never repeats. Ceramic gives a dense base with a handcrafted feel. Black metal sharpens a contemporary bedroom, gold dresses a calmer corner. Linen filters the light and textures the shade. For a deliberately raw finish, look at the black wood versions, and for a fine line at the black metal bases.
| Material or finish | What it brings | Care | Collection to browse |
|---|---|---|---|
| Ceramic | Solid base, soft handcrafted feel | Soft cloth, avoid knocks | Ceramic bases |
| Wood, including driftwood | Warmth, grain, Nordic style | Dust dry, avoid damp | Nordic style |
| Black metal | Fine lines, contemporary look | Microfibre, no abrasives | Gold and black finishes |
| Linen | Textured shade, filtered light | Soft brush or light vacuuming | Linen shades |
| Crystal and gold | Reflections, dressed-up effect | Dry cloth, no harsh products | Crystal models |
How do you recharge and care for a cordless touch lamp?
A cordless touch lamp recharges on its cable, near an easily accessible socket, and is cleaned with a soft dry cloth on the sensor as on the shade. Avoid water and abrasive products on the touch area. Put the cable away after charging to keep the bedside clear.
Recharging without cluttering the bedside table
Plug the cable into an accessible socket, let the charge run to the end, then unplug and store the cord in a drawer. This routine avoids the wire dangling over the shelf all day. If the socket is far away, recharge the lamp elsewhere in the room and bring it back: that is precisely the point of cordless. A model with a linen shade is handled with dry hands.
Cleaning the sensor and the shade without damaging them
On the touch area, a soft dry cloth is enough: no alcohol, no damp sponge, a greasy or wet sensor responds less well. For the shade, dust according to the material, soft brush on textile, microfibre on metal and ceramic. Go round the base once a month, fine dust settles there and blurs the contact.
How do you choose and order from Designix?
At Designix, payment is secure, delivery is tracked and returns are provided for if the model does not suit. Customer service answers questions on dimensions, material or socket before you order, to choose a fitting suited to the room and the furniture.
Payment, delivery and returns
The method of choosing comes down to three points: use first (reading, night light, working), material next (ceramic, wood, metal, linen according to the furniture), footprint last (shade diameter and stability of the base on the shelf). Once these three points are settled, the selection narrows quickly. Secure payment and tracked delivery apply to every order, and returns remain open if the format does not suit once placed.
Asking a question before ordering
Designix customer service answers on real dimensions, the power type and the material, which avoids a back-and-forth. State the depth of your furniture and whether a socket is nearby: the answer will be more useful. To compare the families before deciding, browse all Designix lighting.
Frequently asked questions about cordless touch lamps
How do you choose an original bedside lamp?
Look for a shape or a material that departs from the classic shade model: ceramic base, mushroom silhouette, raw wood, fine metal or gold finish. Originality is then judged by use: accessible sensor, stable base, adjustable light and simple recharging.
What is meant by an Italian design bedside lamp?
A table lamp with fine lines, often in metal, glass or ceramic, with a worked base and a discreet shade. Italian style favours the silhouette and the material rather than heavy decoration. Check that the touch sensor stays accessible and that the format fits on the bedside table.
What is a mushroom bedside lamp?
It is a lamp whose rounded shade tops a slim base, evoking a mushroom. This round shape diffuses light downwards and to the sides, which makes it gentle on waking. It pairs well with a wooden bedside or a retro decor.
Does a cordless touch bedside lamp need a socket?
Not to switch it on: it runs on a battery or rechargeable cells. A socket is still needed for recharging, to be provided near the bedside or elsewhere in the room. That is what lets you place the lamp away from an electrical point and move it.
How do you clean a touch bedside lamp without damaging it?
Use a soft dry cloth on the sensor and on the base, without water or abrasive product on the touch area. A greasy or damp sensor may stop responding. For the shade, dust according to the material: soft brush on linen, microfibre on metal.





