Circular neon light
This selection is also available in our French store: Néon circulaire
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A circular neon light is a closed luminous ring that is fixed to the ceiling or wall and lights a room evenly on all four sides. The diameter, the cap and the light temperature determine its place and the sharpness of the result.
What is a circular neon light and what light does it give?
A closed ring lights on all four sides at once: the centre of the room does not stay in shadow, unlike a single light point. That is what makes it practical in a laundry room or above a worktop, where you want to see what you are doing. The light temperature does the rest: around 2700 to 3000 K, the neon colour leans towards a warm white for a living room; from 4000 K, it gives a clean white for a workshop or a garage. On the question of the four bulb types, remember incandescent, halogen, compact fluorescent and LED; for a circular ring, check above all the socket and the shape intended by the luminaire.
Circular LED neon light
The LED module is soldered into the ring, with its integrated electronics: it lights immediately, without ignition flicker, and the luminaire connects directly to the mains. The diffuser is chosen opal to soften the light or transparent for a more graphic result. To compare flexible, rigid and ring models, see the neon led collection.
Circular T5 22W neon light
The 22 W T5 circular fluorescent tube is the most common replacement format: a thin ring with a four-pin cap, it slides into a luminaire already in place. The thicker T9 fits older fixtures. The full catalogue selection can be read in the Designix luminaire catalogue.
Which diameter of circular neon light to choose between 20, 30 and 40 cm?
The diameter is chosen for the surface to cover and the ceiling height, not for aesthetics alone: the larger the room and the higher the ceiling, the wider the ring must be to carry the light to the walls. A ring that is too small in a large volume leaves dark corners despite adequate power.
Circular neon light 20 cm diameter
A 20 cm ring suits small volumes: cupboard, under-cabinet, compact shower room. It stays discreet, out of the field of view, and is used as a complement rather than as main lighting. Before ordering, check the cable routing and the type of fixing available at the intended spot.
Circular neon light 30 cm diameter and circular neon light 40 cm
A 30 cm diameter circular neon light covers a corridor, an entrance, a laundry room or a desk corner. The 40 cm diameter circular neon light, and beyond, takes its place in a kitchen, a garage or a workshop where it lights a work area from the ceiling. On this format, check the weight of the luminaire and the strength of the support. For a kitchen, compare with the neon kitchen collection.
| Ring diameter | Where it finds its place | What it brings | To check before purchase |
|---|---|---|---|
| 20 cm | Cupboard, under-cabinet, small shower room | A compact light point that stays out of the field of view | The cable routing and the type of fixing |
| 30 cm | Corridor, entrance, laundry room, desk corner | Light spread over all four sides, with no shadow in the centre | The ceiling height and the socket of the existing luminaire |
| 40 cm | Kitchen, garage, workshop | A ring that lights a work area from the ceiling | The weight of the luminaire and the strength of the support |
| Wider | Large room, utility room | Wide coverage for high volumes | The compatibility of the ballast or power supply |
Where to install a circular neon light in the home?
The ring is placed where light is needed without cast shadow and without cluttering the passage: on the ceiling in work rooms, as a wall light above a worktop or along a corridor. Its round shape leaves the walls free, which counts in a small room.
On the ceiling of a kitchen or laundry room
Fixed to the centre of the ceiling, it lights the whole worktop and the floor without creating a dark area in the middle of the room. In a laundry room or a garage, it makes the corners accessible without an extra lamp. To light an entire kitchen and harmonise with the other light points, see lighting a kitchen from the ceiling.
As a wall light in a corridor or workshop
Mounted on the wall, the ring replaces a classic wall light and keeps the floor clear: useful in a narrow corridor or above a workbench. Our neon wall lights are fixed high up, out of reach of passing traffic. If the corridor is short, a neon wall light for a corridor is often enough where a ceiling light would be too much.
Circular neon light or linear neon light: which shape for which room?
The ring diffuses from a central point, in all directions: it suits rooms where you move around the luminaire. The bar and the strip light along their length, with a more directional result and a simpler mounting along a beam or under a high cabinet.
When the ring is more right than the bar
Choose the ring when the room is crossed in several directions (laundry room, garage, entrance) or when the luminaire must stay at the centre of the ceiling. It also avoids the hard shadows cast by a badly oriented bar above a worktop. The Designix neon wall lights apply this principle in a wall version.
When to prefer a bar or a strip
The neon bar and the strip are justified under a high cabinet, along a wall or in a very long corridor: the light follows the surface to be lit instead of coming from a point. Flexible and rigid models are found in flexible and rigid neon leds. A neon bar is also found in 120 cm for standard worktop lengths.
| Solution | What is needed to install it | Maintenance | When to choose it |
|---|---|---|---|
| Circular fluorescent tube T5 or T9 | A luminaire with ballast and starter, 4-pin cap | Dust the tube, change the starter if ignition flickers | To replace a tube identically in an existing fixture |
| Circular LED neon light | A direct connection to the mains, integrated electronics | A soft cloth on the ring and the diffuser | To light immediately, without starter or ballast |
| Neon wall light | A wall fixing and an electrical supply nearby | Dry cleaning of the strip and the support | To highlight a wall, a worktop or a corridor |
How does a circular neon light work and is a starter needed?
A circular fluorescent tube needs a starter and a ballast to strike the electric arc, then it stays lit thanks to the ballast. A LED neon light integrates the electronics in the luminaire: it connects directly to the mains, without a separate starter or ballast.
Can a neon light work without a starter?
Yes, if the luminaire is electronic or if it is a LED neon light: these setups do not use a separate starter. On a fluorescent setup with a ferromagnetic ballast, the starter remains necessary to trigger ignition. A tube that flickers without lighting often comes from it, sometimes from the tube itself.
Where is the starter in a neon light?
On a fluorescent luminaire, it is a small cylinder housed in the support, next to the tube, often accessible by unscrewing it a quarter turn, sometimes under the cover. Always switch off the power before replacing it, and refit it in the same position. To avoid this part, switching to neon led removes starter and ballast.
Can a circular neon light be replaced by a LED neon light?
Yes, provided that the diameter, the number of pins on the cap and the ceiling fixing match the existing luminaire. Two solutions exist: a circular LED tube that slides into the original fixture following the instructions, or a complete LED luminaire that is reconnected directly.
What to check before replacing a tube
Note the diameter of the ring, the number of pins on the cap and the voltage indicated on the old tube. Then check whether the luminaire requires removal of the starter and ballast, as explained in the manufacturer's instructions: this step varies from one fixture to another and determines the correct operation of the LED tube. A circular neon led of the same diameter can then be fitted without any special tool.
Circular LED neon light: when to change the whole luminaire
If the fixture is old, yellowed or if the ballast hums, replace the whole unit rather than just the tube: the complete LED luminaire connects to the mains and removes the wearing parts. It is also the solution when the original diameter no longer exists. The choice of shapes can be read in choosing a luminaire suited to each room.
How to install and maintain a circular neon light?
Switch off the power before any work, then fix the luminaire to the intended anchor points and check that the weight is taken by the support. A ring is cleaned dry or with a slightly damp cloth, without abrasive products, once the luminaire is switched off and cooled.
Ceiling installation, step by step
Mark the position, check the nature of the support (slab, concrete, panelling) and choose the corresponding plug. Connect the luminaire, refit the diffuser, then restore the power to test the lighting. In a damp room, check the protection rating indicated on the luminaire: this is the reference to compare with the actual use of the room. Our a neon light to fix to the wall follow the same fixing logic.
Cleaning a luminous ring without damaging it
Dust first with a dry cloth so as not to spread the dust over the diffuser, then wipe with a soft cloth barely damp. Avoid abrasive products and direct sprays on the electronics. Flickering ignition after several years often signals a tired starter on a fluorescent setup, not a cleanliness problem.
Frequently asked questions about the circular neon light
Is it possible to replace a neon light with a LED neon light?
Yes: a circular LED tube fits into the original luminaire if the diameter and the cap match, often after removing the starter according to the instructions. If the fixture is old or damaged, a complete LED luminaire, which connects directly to the mains, is simpler to install.
Are neon lights banned in France?
Fluorescent tubes, which contain mercury, are gradually being withdrawn from the European market in favour of LED solutions; a LED neon light is not affected. Before ordering a replacement tube, check the exact reference of the tube and the type of cap on your luminaire.
How does a neon lamp work?
A neon lamp is a tube in which an electrical discharge excites a gas that emits light. On a circular fluorescent tube, the starter triggers ignition and the ballast regulates the current; on a LED neon light, integrated electronics produce the light without gas.
Can a neon light work without a starter?
Yes, if the luminaire is electronic or if it is a LED neon light: these models do not use a separate starter. On a classic fluorescent setup with a ferromagnetic ballast, the starter remains necessary to trigger ignition, and a tube that flickers often comes from it.
Where is the starter in a neon light?
On a fluorescent luminaire, the starter is a small cylinder housed in the support, next to the tube, often accessible by unscrewing it a quarter turn. It is sometimes found under the luminaire cover; always switch off the power before replacing it.
What to do if my neon light without a starter does not light?
First check the power supply and the connection of the luminaire, then the condition of the tube and its electronics. A tube not properly pushed into its cap or a tired power supply prevents ignition; if the luminaire is old, a complete LED model is often simpler than repair.
What are the different types of neon lights?
A distinction is made between linear fluorescent tubes, circular fluorescent tubes in T5 or T9, flexible LED neon lights in bar or ring form, and neon wall lights. The former are replaced while keeping the luminaire, the LED solutions are installed with their own power supply.
Is it still possible to buy neon tubes?
Yes: circular fluorescent tubes remain on sale while stocks last, and circular LED equivalents are available. Compare the diameter, the cap and the voltage indicated on the old tube before ordering, or switch to a complete LED luminaire if the fixture is old.
Secure payment, tracked delivery, returns and Designix customer service: you order the right diameter and the right cap, and you can change your mind if the fixing does not match. To finish comparing shapes and sources, browse the luminaire range and the rings of circular neon led.





